1-2 of 2 Answers
If you look at the back of the TV, there is a rectangular block in the center of the rear that protrudes about one and a half inches out from the center of the screen part of the TV. In the right side of that block is where HDMI cables attach, in the left side of the block at about the same height as the HDMI 2 port is where the power cord (permanently attached and non-removable) is connected, and at the bottom of that block is where the antenna connector, RCA jacks, and headphone jack are. There are no wires that come straight out of the back of the TV because it is designed to be able to be mounted on a wall mount if you desire. The power wire intentionally does not come out of the same side of the TV as either the antenna/rca/headphone cables or the HDMI/USB cables to keep electrical interference from the power line as far from the audio and video signal cables as possible. If the TV is on a wall mount the three sets of cables will naturally drape downwards due to gravity and stay separated from each other unless you use something to tie them together. If you mount the TV on a wall mount that can move and you move it around a lot it could eventually damage the power cable from repeatedly flexing it in different directions, so a model of TV that has a modular, removable power cable that could be replaced more easily would be more ideal than this TV for that use case.
Sorry, there was a problem. Please try again later.The TV has a power button at the bottom center of the TV. The power connector is located at the center back of the TV. Dina | Insignia Support | https://www.insigniaproducts.com/contact-us
Sorry, there was a problem. Please try again later.
