“My tv had been working on my Internet but now after power outage it won’t find hdmi it only stays on “TV “ And can’t find any channels. The remote won’t change the TV setting . Even though cable is connected to hdmi. My other tv works in the same outlet”
Answer This Question
1-2 of 2 Answers
I had the same thing happen to my 39" Insignia TV. Turn it off. Unplug it and leave it unplugged for about a minute. Now press and hold the power button. Plug the TV in and wait about 10 seconds before releasing the power button. I'm not sure what else I did.. but I just googled and found this: "Unplug the TV Power Cord from the wall outlet/ socket for 5 Minutes to reset, replug back in to reboot, and try again pairing the TV remote by holding down the Home icon key for 20 seconds" It helped the guy who was having a similar issue
Sorry, there was a problem. Please try again later.Hi there, To get back the cable to the HDMI, please follow the steps below: 1.Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2.Connect a coaxial cable (not provided) to the cable wall jack and to the cable-in jack on the cable or satellite box. 3.Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the cable or satellite box. 4.Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5.Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the cable or satellite box to, then press ENTER. For further assistance, please contact us using the link below or contact Customer Service directly at (877) 467-4289 Monday to Saturday 8 a.m. to 9 p.m. CT we'll be more than happy to assist you regarding this matter. Insignia Support Shella https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
Sorry, there was a problem. Please try again later.