I see the extra rinse cycle (at the top end of the machine) but how do I add that to an active washing cycle? I want an extra rinse null

Question

Brian · Accepted Answer

Hold down the two buttons on the control panel until the extra rinse light comes on. I found that the extra rinse cycle adds quite a bit of time to the whole wash process.

Brian · Answer

I use the extra rinse cycle when washing towers. Select the extra rinse cycle by holding down the 2 buttons down at the same time on the control panel.
When that command is accepted, the extra rinse on the control panel will light up. For me, with the extra rinse cycle selected, the total wash time was over 2 hours.

Madge87 · Answer

After you’ve picked the wash cycle you want, push the water level and wash temp buttons at the same time and hokd until extra rinse light comes on. Then push start.

InsigniaCustomerSupport · Answer

Press and hold the Water Level and Wash Temp buttons at the same time for 3 seconds to add an extra rinse to the wash cycle.

“I see the extra rinse cycle (at the top end of the machine) but how do I add that to an active washing cycle? I want an extra rinse”

1-4 of 4 Answers