Questions & Answers

Q: QuestionWhy would I need the tilt feature on the JOBY GripTight PRO tablet mount?

• A:Answer You can adjust the tilt angle to prevent glare on your tablet screen.

Q: QuestionDoes the JOBY GripTight PRO tablet mount work with all tablet sizes?

• A:Answer It fits most models, with or without a case, with diagonals from 7" to 10".

Q: QuestionCan I use this mount with my tablet in portrait mode?

• A:Answer Yes, the mount can be adjusted to view your tablet in either portrait or landscape mode.

Q: QuestionHow does the JOBY GripTight PRO tablet mount attach to a tripod?

• A:Answer It connects to a tripod with a standard 1/4"-20 thread.

Q: QuestionWill this fit my 12.9 inch Ipad pro ?

Asked 5 years ago by Brutal669x.

• A:Answer No, this will not fit your 12.9 inch Ipad pro.

  Answered 5 years ago by CommunityAnswer

  Helpful (22)Unhelpful (3)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work for a I-Pad Pro?

Asked 6 years ago by Robb08.

• A:Answer We bought the IPad pro and this about 2 months ago to use for videoing games. It does fit, but won't work with certain covers for the IPAD (the one we bought was too thick, then the second one we purchased had a stylus holder on side that wouldn't slide in with this device. So, we use without a cover. You need to make sure you tighten it by pushing on the sides of the tabs once installed...just be careful. We took ours back to the store and had the sales person work with us to make sure it would fit properly. We have used it for 5 tournaments and it seems to be fine

  Answered 6 years ago by basketballfam4lifeVerified Purchase

  Helpful (7)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill this JOBY - GripPro work with my Samsung Galaxy Tablet A 10"?

Asked 5 years ago by Gripless24.

• A:Answer Yet it will work with a Galaxy Tab A. That is what I have.

  Answered 5 years ago by Chaser

  Helpful (5)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhich tripod do I need to purchase to work with this ipad mount?

Asked 5 years ago by Mel567.

• A:Answer Any typical tripod will work for this mount.

  Answered 5 years ago by ReneVerified Purchase

  Helpful (5)Unhelpful (1)ReportAnswer this questionShow more answers (2)

Q: QuestionHow tall is this tripod stand?

Asked 5 years ago by Beetle.

• A:Answer This device probably adds no more than an inch to the height of your tablet and can not stand on its own. It just provides a secure holder for your tablet and it has the same type of threaded plate that a camera has, so it can be placed on any camera tripod (purchased separately). I like mine so far - it gives good range of motion.

  Answered 5 years ago by MarjVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionHow high does this tripod adjust to you can give me inches or feet.

Asked 5 years ago by Height.

• A:Answer This is not a tripod- this is a clamp that can be attached to an existing tripod head to hold a tablet. You need to provide the tripod.

  Answered 5 years ago by GrinchVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes it tilt upward in case you are sitting it on the floor

Asked 5 years ago by Jen.

• A:Answer Yes.. you will be able to tilt it.. depending on the angle you are viewing it should be able to tilt/rotate 180 degrees..

  Answered 5 years ago by JustMobileVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill this tripod work with the 7th generation iPad. 10.2 inches

Asked 5 years ago by Brenda.

• A:Answer Yes it is adjustable. You need to make sure it is in securely before tightening the locking screw.

  Answered 5 years ago by CrazyClergyVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this Joby work with Bower - Multipod Pro 67-inch Tripod?

Asked 7 months ago by Anonymous.

Q: QuestionCan you show me the way the mount attaches to the tripod. I have squares with a screw atop of them that fit into the top of the tripod (maybe old kind)

Asked 8 months ago by Anonymous.

Q: QuestionI assume my Samsung Galaxy S9+ is too big? The outside diagonal is 13 in. (13.25 horizontal) without a case (on order). I will keep looking and check back in.

Asked 9 months ago by Bill.

• A:Answer Don't go by the screen's diagonal--that almost threw me off as well. JOBY's website says: "can accommodate any tablet with a width of 12.8 to 19.2cm (5-7.5”) and a depth up to 12mm (0.47”)," so check the _width_ of your tablet instead.

  Answered 5 months ago by TenChiAikidoColoSpringsVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit my iPad 9th generation?

Asked 1 year ago by MastoMom06.

Q: QuestionAny recommended tripod?

Asked 2 years ago by stacy.

• A:Answer Any of Joby brand's well . But if you can't afford try some of the second handstore, one of the stands I use a camera stand from the 70s.

  Answered 1 year ago by Jayrex1229Verified Purchase

  • 
  • 
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill it fit a iPhone 14 pro max?

Asked 2 years ago by ComicFuel.

• A:Answer While I can't say for certain, it's designed to hold a tablet so it should fit an iPhone. If anything, it may be too large.

  Answered 2 years ago by DaveMVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo I need an adapter/accessory to thread onto my Manfroto Tripod?

Asked 2 years ago by tvang245.

• A:Answer No

  Answered 2 years ago by DavisDVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)