how to change water filter on keurig coffey maker null

First you take the lid off the tank, inside the tank you'll see a stand-up filter holder it should just pop right off when you pull it. once the filter holder is removed, at the very bottom of the filter holder you'll see two tabs squeeze them and pull down. This will pull be filter holder and the filter out the same time pull the old filter out and throw it away. Take the new filter out of the pack and put it in a glass of water for 5 minutes to allow the charcoal to soak up water. once the five minutes has expired rinse it off for 60 seconds to get any loose charcoal particles or standing water off the filter install it back into the filter holder the way you pulled it out push the filter holder into the filter assembly and then pop it back on the the water inlet inside the tank that you pulled it off of originally you should be good to go after that.

The long grey wand type thing in water reservoir pull up remove filter replace with new. Make sure only cold water is used in reservoir due to its coal filter.

Joe you need the started kit if you don't already have it in the water tank. It's a plastic tower that snaps on the black drain on the bottom of the tank. The filter sits in the bottom of the tube. The tube has a dial on top to indicate when installed and when to replace.

Very easy and instructions are included in box with the filter. You basically just pull up on the filter holder handle and it comes out of reservoir. Replace filter and push back in. It is recommended that you soak new filter in a cup of water and rinse before installing.

Simply remove the water tank from the coffee maker, remove the lid, look inside you will see the filter holder simply lift it out remove the filter and repace it with the new filer that has been soaked in water for 5 minutes and rinsed. Then put everything back together in reverse.

You’ll need to have the clear plastic filter holder that attaches the inside bottom of the water tank. If you don’t have a removable filter holder then you probably don’t need these filters. I have seen them for sale at Kohl’s department store, or online at Keurig.com...maybe look for them there if you think you’d like to filter your water

Pull out the water filter holder in the tank remove the old water filter by pulling down on the cover and pulling out the filter. Soak new filter in a glass of clean water for 5 minutes. Rinse the new filter after soaking for 60 seconds then install it in the holder and replace the cover and snap it back into the tank

First you pull out the water filter holder remove the bottom take out the old water filter. Soak the new water filter in a glass of water making sure it's submerged for 5 minutes. Rinse the new water filter for 60 seconds, install it into the filter holder and then snap it back into the water container.

Need help replacing the coffee filters model # S/N:5000.3100.1601636

Does the Keurig K-Cafe need a filter. Recently bought one but don’t know if it needs a filter

“how to change water filter on keurig coffey maker”

This question is for: Keurig - Water Filter Replacement Cartridges (2-Pack) - White

Asked by joe 9 years ago

Answer This Question

See all questions & answers

Keurig - Water Filter Replacement Cartridges (2-Pack) - White-Front_Standard

1-10 of 10 Answers

First you take the lid off the tank, inside the tank you'll see a stand-up filter holder it should just pop right off when you pull it. once the filter holder is removed, at the very bottom of the filter holder you'll see two tabs squeeze them and pull down. This will pull be filter holder and the filter out the same time pull the old filter out and throw it away. Take the new filter out of the pack and put it in a glass of water for 5 minutes to allow the charcoal to soak up water. once the five minutes has expired rinse it off for 60 seconds to get any loose charcoal particles or standing water off the filter install it back into the filter holder the way you pulled it out push the filter holder into the filter assembly and then pop it back on the the water inlet inside the tank that you pulled it off of originally you should be good to go after that.
Answered by coolman 7 years ago
Sorry, there was a problem. Please try again later.
The long grey wand type thing in water reservoir pull up remove filter replace with new. Make sure only cold water is used in reservoir due to its coal filter.
Answered by Jonirose633 8 years ago
Sorry, there was a problem. Please try again later.
Joe you need the started kit if you don't already have it in the water tank. It's a plastic tower that snaps on the black drain on the bottom of the tank. The filter sits in the bottom of the tube. The tube has a dial on top to indicate when installed and when to replace.
Answered by Cabrioguy 8 years ago
Sorry, there was a problem. Please try again later.
Very easy and instructions are included in box with the filter. You basically just pull up on the filter holder handle and it comes out of reservoir. Replace filter and push back in. It is recommended that you soak new filter in a cup of water and rinse before installing.
Answered by steve 7 years ago
Sorry, there was a problem. Please try again later.
Simply remove the water tank from the coffee maker, remove the lid, look inside you will see the filter holder simply lift it out remove the filter and repace it with the new filer that has been soaked in water for 5 minutes and rinsed. Then put everything back together in reverse.
Answered by Clif 8 years ago
Sorry, there was a problem. Please try again later.
You’ll need to have the clear plastic filter holder that attaches the inside bottom of the water tank. If you don’t have a removable filter holder then you probably don’t need these filters. I have seen them for sale at Kohl’s department store, or online at Keurig.com...maybe look for them there if you think you’d like to filter your water
Answered by Cbusteach 6 years ago
Sorry, there was a problem. Please try again later.
Pull out the water filter holder in the tank remove the old water filter by pulling down on the cover and pulling out the filter. Soak new filter in a glass of clean water for 5 minutes. Rinse the new filter after soaking for 60 seconds then install it in the holder and replace the cover and snap it back into the tank
Answered by Coolman 9 years ago
Sorry, there was a problem. Please try again later.
First you pull out the water filter holder remove the bottom take out the old water filter. Soak the new water filter in a glass of water making sure it's submerged for 5 minutes. Rinse the new water filter for 60 seconds, install it into the filter holder and then snap it back into the water container.
Answered by Coolman 9 years ago
Sorry, there was a problem. Please try again later.
Need help replacing the coffee filters model # S/N:5000.3100.1601636
Answered by Rmc69 3 years ago
Sorry, there was a problem. Please try again later.
Does the Keurig K-Cafe need a filter. Recently bought one but don’t know if it needs a filter
Answered by Anonymous 1 year ago
Sorry, there was a problem. Please try again later.