Questions & Answers

Q: QuestionWill these knobs work as a replacement on: Model number CGS750P4M3W2 Serial number GT174932P I have a Cafe 30” gas range and three of the 6 knobs are missing

Asked 2 years ago by Anonymous.

• A:Answer Hi, thanks for reaching out to us. We're sorry to hear you need to replace this part, and we're happy to help. These particular knobs are made for cooktops and aren't compatible with your range. The correct part is WB03X31673. Hope this helps! -Sylvia@Cafe

  Answered 2 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these knobs fit the 30" Café range model CGS750P2MS1?

Asked 3 years ago by JaneNYC.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Not well too loose

  Answered 6 months ago by user872973

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill these knobs fit model number cgp95302m1s1

Asked 3 years ago by hulkster.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Stainless Steel

• A:Answer Hi there – thanks for reaching out about these beautiful brushed stainless steel knobs. We checked the specifications for the model CGP95302MS1 cooktop and can confirm that these knobs will fit. Please note that this model does automatically come with brushed stainless steel knobs. If you need to replace a singular knob, you can do so on the GE Appliances Parts website. Feel free to reach out if you have any further questions. Have a great day! Lauren@Café

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDo they make a brushed bronze know for GE profile model number PGS960YPFS. Thanks. Dorian

Asked 3 years ago by Rookie.

• A:Answer Hello there, thank you for reaching out with this excellent question. In order to look into this for you, we need a little more information. Please reach out to us via direct message on social media, and one of our agents would be happy to assist you. -Elliot@Cafe

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI would like to replace my Bertazzoni range knobs with these. Do you think that they are compatible?

Asked 3 years ago by ybinx.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Thank you so much for your time and interest in these wonderful cooktop knobs. Our customizable hardware is only designed and approved for use with Café Appliances and will not fit other brands. We apologize for any frustration or inconvenience this may cause. Do let us know if you have any further questions or concerns as we are always here to for you. -Chris@Café

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these fit model CGP95302M1S1? Are they actually metal? The ones that came with our Cafe stovetop were plastic. The finish melted off several after only a rather short period of time. For what we paid for GE Cafe line, we were very disappointed.

Asked 3 years ago by MarcB.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Stainless Steel

• A:Answer Hi there, thank you so much for reaching out with this excellent question. First off, we are very disappointed to hear about your experience with the previous knobs, and it is definitely understandable how frustrating it would be to deal with the finish not holding up to normal use. For the inconveniences you have experienced, we sincerely apologize. We are very happy to let you know that these knobs are indeed compatible with CGP95302M1S1, and that they are made with anodized aluminum tube and e-coat zinc die cast material, with a stem made of plastic. Please be assured that these have been tested for their durability and performance while cooking. We hope that you find this information helpful, and thank you for choosing Cafe Appliances! -Elliot@Cafe

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello can you tell me if these knobs fit the cafe 36 inch gas cooktop CGU366P2TS1 ?? if not, which copper knobs will work?

Asked 3 years ago by nolimits.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Hey there, and thanks for reaching out! We know how important customization is for your appliance. While these knobs are not compatible with model CGU366P2TS1, we can advise there are compatible brushed copper knobs under CXPR6HKPTCU. We hope this helps, and we are confident these brushed copper knobs will be a great fit for your attractive rangetop! We are happy to assist if you have any other concerns or inquiries – all the best! Sarah@Café

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill the CXCG1K0PMBZ knobs fit the model ZGU36RSLSS model?

Asked 3 years ago by beth.

• A:Answer Hello, this is a great question! The Monogram gas cooktops and the Café knobs cannot be paired together as they are not tested and designed to do so. We do apologize for any inconvenience this may cause. We appreciate your interest in our products and if you have further questions please reach out. -Shayla@Café

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy Cafe series stovetop model is CGP70362N1S1; serial number MS092704Q. Will this set fit my stovetop?

Asked 3 years ago by RJO.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Hi there, and thanks for reaching out to us! We know how important creating a custom appearance for your kitchen is, and are glad to advise these brushed copper knobs would indeed be compatible with model CGP70362NS1! We are confident these copper knobs will be an excellent fit for you - if you have any other concerns or questions, we're always happy to help. All the best! -Sarah@Café

  Answered 3 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these fit a ge profile oven cafe model number c25980sem1ss? And do they not have numbers on them to determine temp like the old ones?

Asked 4 years ago by Kris.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Stainless Steel

• A:Answer Hi! Thanks for asking. We had a little issue finding your model as it's written but we did find model CGS980SEMSS on our GEA website. Using that model as a reference, the knob kit that you've found here would not work for it. This knob kit is only for select Café cooktops. - If you're needing replacement knobs for this model the part numbers are as follows; the quantity needed is in parenthesis. WB03K10265 (3), WB03K10267 (1), and WB03K10266 (2). If the new knobs do not sit flush like the original knobs and there is a gap behind knob, sometimes the spring clips on older knobs can come loose and stay on the valve shaft when the old knob is removed, then they get shoved down and interfere when new knobs are installed. Check the valve shaft to see if there is an old spring clip still installed. If so, small pliers or a pick can be used to slide the spring clip off. Hope this is helpful! Best wishes. -Michael@Cafe

  Answered 4 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThe 36” cooktop has 6 knobs, 5 large and 1 small knob to lock the gas. Is the smaller knob available for purchase? If so, how or where can I buy in the brushed copper?

Asked 4 years ago by Serg.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Hi, we appreciate you reaching out to us, and it's a pleasure having you in the Café family. We're sorry to hear about your knob and we'd be happy to help find a replacement with a Brushed Copper finish. So that we can give you the correct information, we ask you to reach out to us on social media with the model/serial number of your 36" cooktop. Hope to hear from you soon. -Sylvia@Café

  Answered 4 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these fit the 36 in gas cooktop? I know that I will need one more just wondering if they are the same size

Asked 4 years ago by Cafe.

• A:Answer Hi, good question! We always enjoy hearing from our loyal consumers and we'd be happy to help. In order for us to see if these Knobs are compatible, we'll need to know the model number of your cooktop. Please reach out to us on social media with this information so we can assist you. Hope to hear from you soon! -Sylvia@Cafe

  Answered 4 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these fit KitchenAid?

Asked 4 years ago by Anonymous.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer We're sorry but our parts are not tested with other brands and would likely not fit. They wouldn't look as wonderful as they would on our cooktops, anyway. Thanks for reaching out and we hope to hear back from you in the future. - John@Cafe

  Answered 4 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDo these knobs have light around the bottom when they are turned on?

Asked 4 years ago by BruceT.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Stainless Steel

• A:Answer Hello, Great question! We thank you for your interest and we'd love to help. We found that these knobs have LED backlighting for better visibility while cooking in the evening. Let us know if you need any further assistance. Have a great day! -Sylvia@Cafe

  Answered 4 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the knobs fit Samsung 29.94" Fingerprint Resistant Tuscan Stainless Steel Free Standing Gas Range-NX58R6631ST? Thank you.

Asked 4 years ago by mike.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Hello Mike - Thank you for your question; we are glad to assist. These knobs are specifically designed for Café gas cooktops. They are not tested to fit other brands. Thanks for checking! Olga@Cafe

  Answered 4 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these knobs fit model C2S900P2MS1?

Asked 5 years ago by Gilgu.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Hi Gilgu- Thanks for choosing Cafe Model # C2S900P2MS1! This model is compatible with Brushed Copper Hardware Kit CXFCGHKPMCU. We suggest viewing the Quick Specs document at the following link for more details: https://products.cafeappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=C2S900P4MW2_3MD1_2MS1_19.2.5.pdf - We're glad to have you in the family. Keep in touch at cafeappliances.com. Enjoy! Sue

  Answered 5 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these knobs fit my 30 inch gas cooktop Model # JGP5030SLSS? They look very similar.

Asked 5 years ago by Pegatha.

• A:Answer Hi Pegatha - Thanks for your interest! Café Gas Cooktops Knobs will not fit GE Cooktop Model # JGP5030SLSS. These knobs are designed exclusively for the Café Customizable Professional Collection. Learn more at: https://www.cafeappliances.com/collections/customizable-professional - We'd love to have you in the family. Keep in touch! Sue

  Answered 5 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionSince the knobs are made by GE, will they fit the GE slate line?

Asked 5 years ago by TeeBee.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Will the cafe bass gas range handle fit A GE model gas range JGBSIODE M3WW

  Answered 1 year ago by Unfinishedjob

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionSince these are essentially GE knobs , will they fit the GE slate line?

Asked 5 years ago by TeeBee.

This question was asked about the related product: Knobs for Café Gas Cooktops - Brushed Copper

• A:Answer Hi Sherri - thanks for your interest! These knob are exclusively for use with The Café Customizable Professional Collection. They are not compatible with GE models in Slate. Explore Café at www.cafeappliances.com/collections/customizable-professional - Keep in touch! Sue

  Answered 5 years ago by Cafe Appliances

  
  Helpful (0)Unhelpful (0)ReportAnswer this question