1-2 of 2 Answers
According to the “upper cabinet template” you are to drill a 3/8” hole through the bottom of the cabinet at 10 3/8” from the wall at the back of the cabinet, (this is best done3 from beneath the cabinet because if the cabinet has a back to it your holes will be off by same amount that the cabinet back inside is from the actual wall) the microwave is pretty much tight to the wall when it is sitting in the mounting plate. The 3/8” hole is over-sized for the bolt so there is a little wiggle room. The mounting plate and the templates use the centerline of the cabinet opening for locating these attachment holes the one on the left (facing the cabinet) is 117/8” from the centerline and the one on the right is 13 7/16” from the centerline.
Sorry, there was a problem. Please try again later.Regrettably, we do not have access to CAD Drawings for the Over-the-Range Microwave Ovens. They come with a template that can be used to mark the mount hole for the wall bracket that you will need to drill into your wall. ^Chris
Sorry, there was a problem. Please try again later.
