“What installation equipment is needed for a DIY install?”
Answer This Question
1-2 of 2 Answers
It was professionally installed
Sorry, there was a problem. Please try again later.The LG 4.1 cu. Ft. Top Load Washer with 4-Way Agitator® and TurboDrum™ Technology, Model # WT6105CW, comes with an attached power cord with a standard 3-prong, grounding plug that must be plugged into a standard, dedicated 3-wire, grounding outlet, rated 120V, 60Hz, and an attached drain hose that must be connected to either a standpipe or laundry tub. The drain must be installed in accordance with any applicable local codes and regulations, and the end of the drain hose should be located a minimum of 29.5 inches (75 cm) and a maximum of 96 inches (244 cm) above the bottom of the washer. For best results, locate the end of the drain hose no higher than 66 inches (168 cm) above the bottom of the washer. As the drain outlet is raised beyond 66 inches (168 cm), the drain function will be increasingly affected. The only tools required for a DIY installation are pliers, a flat-blade screwdriver, and a level...^Ivan.
Sorry, there was a problem. Please try again later.