A:AnswerGood morning,
Yes, this is manual defrost. The exact exterior dimensions are, width (side to side) 24.2", depth (front to back) 23.22" and height 78.1".
Thank you
A:AnswerYou can in the freezer if it will fit but why would you want to do that unless you plan on using the whole roll of meat once defrosted???? It’s just me n my hubby and I cut my five pound roll of hmbgr meat up into one pound chunks n out each into a freezer storage bag and flatten the meat in the bag n then zip lock tightly. Flattening the meat will help to defrost more quickly! But never store meat in the top (fridge) part more than a day or two. Thank you
A:AnswerGood afternoon, Jennifer,
Yes, we are recommending 4" for both sides and the back to maintain proper airflow and to make sure the unit operates optimally.
Thank you,
A:AnswerYes you can change it from centigrade to Fahrenheit- you put one finger on each up n down arrow for three seconds to unlock the settings and once the red light goes out - that means it’s unlocked- then immediately go to the C/F button n push it for 3 seconds and then go back to the arrows n push the down arrow- which ever side moves a number ( right side numbers is for the freezer- left side is for fridge) then set the temp you want for both and then after you set them- if you don’t push any more buttons for about 3-5 seconds it will automatically lock the settings again! Voila!!!!!
A:AnswerGood morning, Matt,
Yes, it means airflow around the unit, at least four inches of clearance on all sides. You can place this in your basement.
Thank you,
A:AnswerGood morning,
The light does not stay on all the time unless you would like it on. There is a rocker switch inside at the top so you can turn it on or off whenever you want.
Thank you,
A:AnswerGood morning, Rob,
Yes you can purchase extra shelves. Please reach out to our customer service team at 855-531-4808 and they can get your order placed for more shelves.
Thank you,
A:AnswerGood morning Doc,
Yes, the Premium label can be removed. You would need to change the whole lightbox panel. There are two screws on the top. Remove those two screws, change the lightbox panel then put back the screws again.
Thanks,
