“How do I remove the cover, so it can be mounted to the wall?”
Answer This Question
1-4 of 4 Answers
Call RING to be sure but I think you need to keep the cover on , just slide it over , it should still mount ok to the wall with that cover , you might need it at some point , good to have
Sorry, there was a problem. Please try again later.You don't need to remove the cover to mount it on the wall, you can slide the cover left or right. You are most likely referring to the base. To mount the camera on the wall, you have to remove the bottom gray part of the base. Turn the camera upside down and you'll see two holes on that bottom part of the base. To remove it, slide the base on the opposite side of the "Up" arrow, so push that gray base downward. That's the base you will screw on the wall. Use the 2 screws. after you screw this part of the base, slide back the camera on that base, plug it in, and adjust the camera position. Hope this helps.
Sorry, there was a problem. Please try again later.Slide bottom cover forward or google it
Sorry, there was a problem. Please try again later.Hi Tdarty05. Thanks for asking. The privacy cover for the Ring Indoor Cam does not need to be removed to install the device on a wall. Ring Indoor Cam can be mounted anywhere indoors on its own stand or mounted to a wall or ceiling. Visit our support center for additional details. We invite you to reach out to our Community if any additional information is needed regarding your question. The Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another by sharing their feedback and experiences with each other. All the best, Nicole from Ring.
Sorry, there was a problem. Please try again later.