1-10 of 10 Answers
Just unplug the cable from each port.
Sorry, there was a problem. Please try again later.Make sure you remove the covers from each end of the cable. I had the same problem. The Manufacturer should have instructions and images/pictures.
Sorry, there was a problem. Please try again later.You have to press both sides of the cable where it connects.
Sorry, there was a problem. Please try again later.You shouldn't have to press anything. It pulls straight out you just have to use a little effort. They snap in pretty good so you're not going to hurt it.
Sorry, there was a problem. Please try again later.You should be able to just pull it out. Staright in, straight out.
Sorry, there was a problem. Please try again later.This particular cable simply plugs into the receptacle made for it. just pull it out.
Sorry, there was a problem. Please try again later.You can simply remove an optical cable by grasping it firmly at the connector and pulling it straight out. There are no tabs or any buttons to press, just pull it out from the connector
Sorry, there was a problem. Please try again later.Simply remove from your device(s) just like you would unplug any device from an outlet.
Sorry, there was a problem. Please try again later.optical audio cables are push in. No buttons or release tabs to remove. the plug aligns with the female receptacle to allow for a very snug fit. Just carefully pull on the covered end of the cable and it will come out. Don't ever pull out on the cord of any product as always.
Sorry, there was a problem. Please try again later.You just need to pull it out. There's no switch or catch. It should slide right out.
Sorry, there was a problem. Please try again later.
