1-4 of 4 Answers
You have to wait a few hours, but also have to be connected to water source.note you have to change from water to ice on the dispenser touch screen
Sorry, there was a problem. Please try again later.Make sure that the ice maker is on, unfortunately, it is too easy to accidentally bump the control panel and turn off the ice maker. Other things to look for: is the water supply line hooked up and clear of obstructions? Are there any kinks in the water line? If freezer temperature is too low you won't get any ice. Make sure that the energy saver is turned off, I've found this to be a useless feature for most users.
Sorry, there was a problem. Please try again later.Check your water line. It may be clogged or you need to replace your line.
Sorry, there was a problem. Please try again later.There are several factors that can affect the ability of an ice maker to produce ice, including water supply, freezer and refrigerator temperatures, and control panel functions. Please check the following to try to resolve the issue: - Is the water connected, the valve turned on and hoses unkinked and free of obstruction? - Is your home's water pressure between 20~125 psi? Under normal conditions, a 5.75 oz. glass can be filled in about 10 seconds. - Is the refrigerator set to the correct temperature? If the refrigerator is too cold, the water lines could freeze. - Is the freezer temperature cold enough? Try lowering the freezer setting. - Is the ice maker turned on? Make sure the Ice Off icon is not illuminated on the display. - Is the control panel locked, which would prevent the dispenser from operating? - Is the water filter installed properly and locked in place? - Did you bleed the air from the lines by dispensing 5-6 gallons of water from the dispenser since installing or replacing the filter? - Did you press the Test button on the ice maker to reset it? If none of the above suggestions helps to resolve the issue, and the ice tray does not fill with water, try removing the water filter temporarily and press the test button on the ice maker again. If the tray fills without a filter installed, then the cartridge is likely clogged or partially clogged and should be replaced. The filter should be replaced about every 6 months based on average usage, but it could become clogged sooner if there are a lot of impurities in the water supply. If, after checking each of these suggestions, the ice maker still isn't functioning properly, please call 888-BEST BUY or 800-SAMSUNG to speak with an agent who will be happy to assist you. - Ms. Samsung
Sorry, there was a problem. Please try again later.
