“Where can I found out the info and instructions on adjusting settings such as sound mode definitions? It’s not in the manual.”
Answer This Question
1-2 of 2 Answers
Hello Guest101, I was able to find the instructions for adjusting sound setting for the HW-Q70T on page 11 of the user manual. https://www.samsung.com/us/support/owners/product/2020-q-series-soundbar-with-dolby-digital-and-dts-hw-q70t When pressed, the setting items such as TREBLE, BASS, SYNC, CENTER LEVEL, FRONT TOP LEVEL, and VIRTUAL ON/OFF are displayed in sequence. The desired item can be adjusted using the Up/Down buttons. – To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons. – Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.) – To control the volume of the each speaker select CENTER LEVEL, or FRONT TOP LEVEL in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons. – If the video on the TV and audio from the Soundbar are not synchronized, select SYNC in Sound Control, and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. – SYNC is only supported for some functions. – If Surround Speakers are connected, select REAR LEVEL and then use the Up/Down buttons to adjust the volume within a -6 to +6 range. – The VIRTUAL Speaker function can be turned ON/OFF by using the Up/Down buttons. ^Cristian
Sorry, there was a problem. Please try again later.You can set it with the remote go to the settings button and it will walk you thru all of the options including bass treble mid-range etc I believe it is under the heading of equalizer. Hope this helps
Sorry, there was a problem. Please try again later.