Black Friday is hereShop new DoorbustersShop now

Skip to content
Gift Ideas
Williston
26 Cypress St
Williston, VT 05495
Opens tomorrow at 9 am
Find Another Store
Main Content

Questions & Answers

No content
  • Angle. Sanus - 28" to 42" Adjustable Height Speaker Stands for Satellite Speaker (2-pack) - Black.

Sanus - 28" to 42" Adjustable Height Speaker Stands for Satellite Speaker (2-pack) - Black

Model:
EFSATB
SKU:
4966754
Your price for this item is $54.99
Clearance
The comparable value price is $109.99
Page Showing 1-20 of 154 questions
Ask a Question

  • QuestionI have Samsung speakers weighing 4.4 lbs. Will this be compatible?

    Asked by TJ.

    • Answer I have a Samsung HW-950 soundbar and it fit fine.

      Answered by SharonthaF

  • QuestionHas anyone used this with the Nakamichi 9.2.4 shockwave surround speakers?

    Asked by Astral.

    • Answer Yes I have. I WOULDNT recommend these for use with your Nakamichi 9.2.4 Shockwafe Surround Speakers UNLESS you were planning to lay them on their side. Thats the only attachment I believe attaches to these speakers properly. If you stand them up that attachment will screw into one slot but not the top slot seeing as how that standing attachment is much to short -_- I have all my speakers standing up and held down onto the stands with double sided sticky tape. As a matter of fact I might take these stands back but ive been to lazy to get around to it. Your best bet is going on youtube and searching what kind of stands those people are using for their nakamichi surround speakers. Hope this helps? Best Bet DONT GET THESE!

      Answered by MajinSeven

  • Questionwill these stands work with Klipsch RP-250-S? thank you

    Asked by BigAL.

    • Answer I am very impressed with the variety of mounting options that come with this product. The Klipsch speakers have a keyhole mount on the back. I think these stands will work for your setup.

      Answered by Abbs

  • QuestionWill the stand hide the speaker cord?

    Asked by Tooshort.

    • Answer Yes, The speaker cord is hidden in the stand and comes out at the top and bottom.

      Answered by Jeremy

  • QuestionAre these stands compatible with the Vizio 5.1.2 Atmos Satellite Speakers?

    Asked by Wb761.

    • Answer I actually bought these stands specifically for the satellite speakers of my Vizio Elevate sound bar and they work great. Aesthetically, they are a great pairing and look modern, but unobtrusive. There are two key points, however: 1. The speaker stands come with a large assortment of hardware, but they don't have the correct size of screws that attach to the Vizio speakers 2. The unique shape of the satellite speaker connectors will not fit through the speaker stand tubing, so you won't be able to fully conceal the wiring. We wrapped our wires up the speaker stand shaft and it's not too noticeable since both are black in color I still think the stands look great, are decent construction and stability, and would definitely recommend them.

      Answered by jsamof00

  • QuestionWill the speaker stands work with Sony SA-Z9R Rear speakers ??

    Asked by Jayfly.

    • Answer No, they don't fit for Sony Z9R. firstly the design of holes on sony rear speaker is such that they are not centrally aligned. secondly the wire is not detachable that can go into holes/socket of the stand. it will be again mess/cluttered way of doing things.

      Answered by Deepu

  • Questioncan u use these speakers on any sournd sound speakes?

    Asked by Anonymous.

    • Answer These stands will not work with Sonos Play 3 Speakers. Do not listen to a Best Buy sales associate who will try to tell you otherwise

      Answered by BengalManiac

  • QuestionWill these stands fit a Q950A Samsung system?

    Asked by Zap.

    • Answer Unfortunately it does not, securely anyway. The rear bracket is not tall enough to allow you to secure the speaker to the stand. The rear speakers do sit on the speaker plate, so if you do not have pets, kids, or clumsy roommates, it will work.

      Answered by Jstrdog

  • QuestionWill these properly mount the Definitive ProCinema 600 series satellite speakers?

    Asked by Nate.

    • Answer Yes, the EFSATB speaker stands are compatible with the Definite Pro Cinema 600 Satellite speakers.

      Answered by SanusStaff

  • QuestionWill they work with the s15 polk speakers

    Asked by Alex.

    • Answer I have Polk T15 speakers and they work perfectly with all the included speaker mounts! I bought a 2nd pair within a year to mount my rear speakers. Be careful with the height adjustment screws because of the 2 pairs, 2 of the screws had problems tightening. Pretty much, pick a height, screw the height adjustment screws carefully and leave them there. I rate them 4.5 stars and not 5 only because of the height adjustment screws! They should work with ANY speakers with all the available mounting parts included with the pair!

      Answered by paf1124

  • QuestionWill my rears belonging to the Samsung HW-N950 (similar to the k950) work with these stands?

    Asked by EliW.

    • Answer Hello, These can work with rear speakers as long as the speakers are under 10lbs each. Kathryn @SANUS

      Answered by SanusStaff

  • QuestionWill this work with B&W M1 speaker?

    Asked by dnt.

    • Answer Hello dnt, Thanks so much for your question and for considering SANUS brand speaker stands. Yes, those speakers should work with these stands. For install support or any other questions, please call Ross at 877.894.6280 or email Ross at [email protected] with your contact info and Ross from our SANUS Care department will be happy to assist. Thanks again.

      Answered by SanusStaff

  • QuestionCould you tell me the weight of the whole unit assembled?I understand there are different mounting plates.About 5lbs?10?14? Thank you

    Asked by Jonboy.

    • Answer I would say the one stand without a speaker attached around 7 to 9lbs.

      Answered by Crazy88888

  • QuestionAre these stands compatible with mirage nanosats

    Asked by Anonymous.

    • Answer Hi, I have no idea but there are a lot of different possibilities so I highly doubt you won't find one that fits.... Bring a speaker to Best Buy they'll try it for you (they did it for me) Sorry for the late reply

      Answered by EmmanuelC

  • QuestionWill the Klipsch RS 42 surround speakers be compatible with this stand?

    Asked by Anonymous.

    • Answer No, they weigh to much. Try looking at 36 inch tall wood / metal stands.

      Answered by soundprofessor

  • QuestionWill theses work with the small Bose surround speakers ?

    Asked by Anonymous.

    • Answer Yes, the stands include multiple pieces of hardware to connect different speakers to the stands

      Answered by joppafarms

  • QuestionWill these stands work with Samsung - HW-Q930B

    Asked by Kmac.

    • Answer Yes there is multiple ways of setting it them up.

      Answered by ElCompaCanelo

  • QuestionI have a pair of audio engine p4 will these speaker fit

    Asked by pchappy.

    • Answer I would say yes because you’re given multiple brackets for many different configurations for speakers

      Answered by Anonymous

  • QuestionWill these speaker stands fit the Polk bookshelves signature series

    Asked by Coll.

    • Answer Hi Coll, Thanks for the question. Unfortunately I don't believe this stand will work with your speakers. They are designed to hold up to 10lbs. I checked on some of the Polk bookshelves signature series speakers and they looked to be around 13lbs. Check out our Sanus - Foundations Speaker Stand as they can hold up to 25lbs! Thanks, - Haydn @ SANUS

      Answered by SanusStaff

  • Questionwill these stands work with polk bookshelf speaker T15

    Asked by Anonymous.

    • Answer Yes, they'll work with the T15's but you'll have to get some hardware to facilitate the use of the keyhole mount on the T15. The Sanus stands provide a lot of different hardware for different mounting situations but nothing to mount the Polk T15.

      Answered by KBJSR

Page 1, Showing 1-20 of 154 questions

Most-viewed items

  • SANUS Elite - Height Adjustable Speaker Stands for Sonos Era 100 and Sonos Era 300 Speakers - Sold in Pairs - Black
    Your price for this item is $219.99
  • Insignia™ - 28 – 38" Adjustable Height Speaker Stands for Satellite Speakers - Black
    Your price for this item is $49.99
  • Sonos - ERA 300 Stand (Pair) - Black
    Your price for this item is $279.00
  • Sanus - Wireless Speaker Stands for Sonos Era 100 (Pair) - Black
    Your price for this item is $139.99
  • ECHOGEAR - Premium Floor Speaker Stands – Vibration-Dampening MDF – Fits Edifier, Polk & More – Iso Pads & Carpet Spikes Included - Black
    Your price for this item is $79.99
    The comparable value for this item is $99.99