Questions & Answers

Q: Questionthis mount is for an outdoor tv, can I lock the mount in case of strong winds

Asked 4 years ago by chuck.

• A:Answer Unfortunately we don't recommend this mount for outdoor use as it is not rated for it and is made for indoor use only. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIn 2016 for a prior home I bought a sanus tv mount that held the monitor up with a single connected arm (versus 2 arms in this model) which allowed the TV to extend farther from the wall & allowed for even greater panning. Do you still make that model?

Asked 4 years ago by Garbonzo.

• A:Answer Hi there, I'm not totally sure what model you are referring to. Do you know what the model number is? We do have a mount with a single arm but it is for smaller TVs 37-55" it's the VMF620. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes the amount of the angle that the TV can pan depend on the size of the TV? In other words, can a 50 inch TV pan more than a 90 inch TV? Thanks!

Asked 4 years ago by Garbonzo.

• A:Answer Yes a 90" TV would swivel less than a 50". In our tech-drawing, we have a 65" TV that shows the full 57 degrees of swivel each way to show you how that would look. https://www.sanus.com/assets/products/blf328/documents/BLF328_TD_181030.pdf Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThis mount seems AWFULLY heavy. What is the weight? Is it safe on studs for a pony wall? My TV is only 48" and weighs only about 50 pounds. Do you have a similar, same features, mount not so EXTREME?

Asked 4 years ago by Kathryn.

• A:Answer This mount should be fine as long as it’s in the studs.

  Answered 4 years ago by ShawnVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello, I loved your product , but recently i lost a part that goes on the back to hold the tv to move up and down. Is there a way I can only buy that specific part? if there is. what number should I call to ? thank you so much

Asked 4 years ago by jonathan.

• A:Answer Hey Jonathan, Give us a shout at [email protected] or at 1-800-359-5520 and we should be able to help ya out here. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this mount the new SonyBraviaXR A80J 77" OLED TV?

Asked 4 years ago by Anonymous.

• A:Answer Yes, this mount should be compatible with your TV. This mount can support your TV's 300x300mm VESA pattern and your TV is under the mount's 125lbs weight limit. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhere is this wall mount manufactured?

Asked 4 years ago by Elle.

Q: QuestionHello will this work with any brand of tv. SONY?

Asked 4 years ago by DVA.

• A:Answer Completely universal. Great unit. Solid. So glad I bought this.

  Answered 4 years ago by Watchit

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI just buy a Sony 85” tv, I mounted it in the sanus premium but I feel insecure, the hook seems fragile and I want to mount a soundbar. Any tips or suggestions?

Asked 4 years ago by Anonymous.

• A:Answer I have a 75” Samsung t.v with a sound bar attached and have no issues!

  Answered 3 years ago by NotatechguyVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the collapsed profile width in inches of the bracket?

Asked 4 years ago by Wello.

• A:Answer When retracted this mount will sit 2.15" off of the wall. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this mount support the Sony XBR 65x930D? The Screw hole pattern from Sony's site (link below) is listed as 11 7/8 x 7 7/8. https://www.sony.com/electronics/support/articles/00197971

Asked 4 years ago by TKTV.

• A:Answer Yes this mount should be compatible with your TV. This mount can support your TV's 300x200mm VESA pattern and your TV is under the mounts 125lbs weight limit. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI want to use this mount on a 6" X 6" standing post and hang a 75" flat screen tv. Will it work for this application?

Asked 4 years ago by Daryl.

• A:Answer Living room

  Answered 3 years ago by TheManningsbigScreenTV

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this come off the wall far enough to turn a 85" tv 90 degrees? If not, can I add material behind the mount to accomplish this?

Asked 4 years ago by Drew.

• A:Answer Almost but not a perfect night degrees

  Answered 4 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondoes this mount work with the LG OLED83C1PUA

Asked 4 years ago by Mario.

• A:Answer Yes this mount should be compatible with your specific TV. This mount can support your TV's 400x400mm VESA pattern and your TV is under the mounts 125lbs weight limit. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan you hang a Sonos arc off the bottom of the tv mount (I.e., is there an adapter kit?

Asked 4 years ago by Bobinnm.

• A:Answer Yes, we have a Sonos Arc mount that is compatible with this mount. It's the BSSATM1-B1. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan this be installed on a plaster wall? 1905 SF Victorian wall is in front of two sliding doors ... no studs

Asked 4 years ago by Grow2light.

• A:Answer I don't think it will work for you as just the bracket it's self is somewhat heavy. It's going to put a fair amount of load on the fasteners going into a plaster wall. Perhaps Best Buy's Geek Squad installer could look at your situation and make a suggestion on how to do this for you. In my house one 65" TV is mounted over the fireplace and the previous owner build a 2" X 4" frame in the opening above the fireplace to mount the bracket to.

  Answered 4 years ago by MitchVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work for a Sony 65” Class BRAVIA XR A90J with only one center stud to mount? If not is there one that will?

Asked 4 years ago by Calvin.

• A:Answer Hey Jackson, Are you planning on mounting to two studs? If so this mount should work, it features post-install lateral shift to center the TV. If you are planning on mounting to one stud I'd recommend looking into a single stud mount. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the degrees of swivel from left and right please?

Asked 4 years ago by DJMB.

• A:Answer It can swivel up to 57° to the left and the right. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhy does my tv move to one side once the tv is pulled out from the wall and it will not stay in one place

Asked 4 years ago by Kevin.

• A:Answer The bracket is probably not level and with the weight of the TV away from the wall pulls more on the bracket. Check its level.

  Answered 4 years ago by MitchVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question