A:AnswerYes sheet metal screws will work. I used plastic spacers on sheet metal screws to mount the stand to the metal stud.
No problems this is for a 75” that weighs 65lbs.
A:AnswerHey Julia,
Please contact our customer support team. We would be happy to send those parts out to you. You can reach us at [email protected] or at 1-800-359-5520.
Thanks,
- Haydn @ SANUS
A:AnswerI have a 65" Samsung (width 56.9") which can rotate to about 45 degrees on the "Sanus Premium Series Swivel TV Mount for Most 42" - 90" TVs" ($319.99 at BB). One edge of the TV is very close to the wall, while the other edge hangs way, way out into the room when turned to the max, but in a corner-mount situation it would make sense. An LG 77" CX (width 67.8") TV will presumably turn a little less than my 65" due to the extra 10.9" of width (5.45" on each side of the pivot point) hitting the wall sooner, but still pretty far - my guess, around 40 degrees.
Be aware that the cable management of the mount runs cables thru the extension arms, which took up about 4 feet of cable in my setup before even starting to head off to other equipment, so plan for that. I got 12' HDMI cables, and I kind of wish I'd gotten 15 footers.
A:AnswerHi there,
This mount can support your TV's VESA pattern and your TV is under the mounts 125lbs weight limit. When retracted this mount will sit 2.15" off the wall and can extend out 28".
Thanks,
- Haydn @ SANUS
A:AnswerHi there,
Yes this mount should be compatible with your specific TV. This mount can support the A90j's 300x300mm VESA pattern and it looks like it is under the mounts 125lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerHey Rick,
Unfortunately, this mount will not be able to support your TV's VESA pattern. This mount can support up to a 600x400mm pattern looks like the TC P65VT30 is larger than that. I'd recommend checking out the BXT3-B1 it should be able to support your TV's VESA pattern.
Thanks,
- Haydn @ SANUS
A:AnswerHi Beth33,
Yes, this mount should be compatible with your specific TV! This mount can support your TV's 200x200mm VESA pattern and your TV is well under the mount's 125lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerHey Dan,
Unfortunately this mount cannot support a 100mm x 200mm VESA pattern. The smallest pattern this mount can support is 200mm x 200mm.
Thanks,
- Haydn @ SANUS
A:AnswerHi there,
Yes, this mount should be able to work as a corner mount. This mount can support up to 125lbs so if your TV is under that the mount should be able to support your TV at that angle.
Thanks,
- Haydn @ SANUS
