A:AnswerYes. Recommend the toggle bolt system rated to 175# rather than Molly bolts. Requires a 1/2” hole. Used smaller pilot hole first. Use a stud finder or magnet , try to center the hole in the metal stud. Two on the upper rail , 2 on the bottom rail . As the bracket is 28” I did use two 1/4 Molly bolts at the end as my studs were in the middle but not required …
A:AnswerIn order to get my 65in tv to swivel 45 degrees which is needed for the corner. I used the BXF230-G1 and used lag bolts to place a 2x4 against the wall. Then attached the mount to the 2x4. If you use a 4x4 the 75in may turn 45 degrees. Or you could add 2x6s until you are far enough from the wall. After installing I placed my entire body weight 210lbs on the bxf230-g1 before installing the tv. No manufacture will tell you to do it this way.
