“I am wanting to add another cable. Geek Squad did the initial installation, and I did not pay attention to what they were doing. What is the best way to go about getting the additional cable through the wall and the outlets?”
Answer This Question
1-3 of 3 Answers
You'll have to feed the cable through the brush plate - its easiest to work from the top down and remove the bottom wall plate so you can see a little better into the wall cavity. There is also a video on the product page that may help as well. If you have any additional questions or need further help, please reach out to us at 1-800-621-0049 or email at [email protected] and we would be happy to assist.
Sorry, there was a problem. Please try again later.Use an existing cable that they ran and tie/tape a string or fish to it. to pull it back through. Then attach the new cable to the old one/string/fish combo and pull it back through again. Kind of like a tug-of-war situation, but nobody falls to their death like in Squid Game.
Sorry, there was a problem. Please try again later.Download the installation instructions (pdf under resources). Here is a link but you can find it with a quick search if you don't want to click this one. https://www.legrand.us/audio-visual/home-theater-connections-and-cable-management/in-wall-power-and-cable-management/in-wall-tv-power-kit/p/ht2202whv1 You will probably want to unscrew both top and bottom box to make routing the cable possible. If you are lucky, you may be able to only unscrew the bottom one and feed the cable from the top... You would have to do it blind though.
Sorry, there was a problem. Please try again later.
