1-1 of 1 Answer
To play audio from your JVC projector through Sonos Era 300 speakers, you'll need to ensure that the projector's audio output can be connected to your Sonos system. Here's a step-by-step guide to achieve this: 1. Check Audio Output on JVC Projector Identify Audio Output: Look at the available audio output options on your JVC projector. Common outputs include HDMI ARC, optical audio (TOSLINK), or analog audio (3.5mm or RCA). 2. Connect to Sonos System Using Sonos Port or Sonos Amp: Sonos Port: If your projector has an analog or optical audio output, you can connect it to a Sonos Port, which will then allow you to stream audio to your Sonos Era 300 speakers. Sonos Amp: If you're using passive speakers or have a home theater setup, you could use a Sonos Amp to integrate with your projector. Connect the projector’s audio output to the Amp, and it will manage the audio output to your Era 300s. 3. Configure the Connection Sonos Port Setup: Connect the audio output of your projector to the Sonos Port using the appropriate cables (RCA or optical). Connect the Sonos Port to your Sonos network using the Sonos app. In the Sonos app, configure the Port to play audio from the connected input. Sonos Amp Setup: Connect the projector’s audio output to the Sonos Amp using the correct input (RCA or optical). Connect the Amp to your Sonos network using the app. Configure the Amp to route the audio to the Era 300s. 4. Adjust Settings Sonos App: Make sure the Era 300s are selected as the playback device in the Sonos app. Projector Settings: Ensure that the audio output settings on your JVC projector are correctly configured to send audio through the connected output. 5. Verify and Test Play Audio: Test the setup by playing audio through the projector and ensure that the sound is coming from the Sonos Era 300 speakers. By following these steps, you should be able to successfully route audio from your JVC projector to your Sonos Era 300 speakers.
Sorry, there was a problem. Please try again later.