1-8 of 8 Answers
It's on the back.
Sorry, there was a problem. Please try again later.There are two alarm buttons (turn off / beep / radio). Below each of the two alarm buttons there are plus and minus buttons that set the alarms on each side. The alarm needs to be on beep or radio before the plus and minus buttons will set alarm times. All of the buttons are on the top of the alarm clock.
Sorry, there was a problem. Please try again later.All the button are on the top
Sorry, there was a problem. Please try again later.Choose alarm A or B choose buzz or radio (if you choose radio set the station) the alarm time appears for a few seconds, then A or B appears on the display. It will not appear if the switch is set to off Press set alarm time + or - repeatedly to set the desired time while the alarm time appears on the display. While setting the alarm time A or B flashes on the display. When the alarm time setting operation is complete, the clock display returns after a few seconds and A or B changes from flashing to fully lit.
Sorry, there was a problem. Please try again later.Move the alarm, either one, to radio or alarm position. The alarm time that is already set will flash only a few times. While the alarm time is flashing you must quickly push the + or - button in front of the alarm button to scroll to the desired time.
Sorry, there was a problem. Please try again later.Not sure if you figured this out yet? You just turn the alarm on (whichever one you want to set, A or B), and press the minus or plus button located directly below it.
Sorry, there was a problem. Please try again later.I had same problem but by using the two tone signal and not moving too fast, I accomplished my mission. I tend to move too fast.
Sorry, there was a problem. Please try again later.Hi lynn, Please check this manual for the steps on how to set-up the alarm: https://docs.sony.com/release/ICFC1T_EN_FR.pdf. Thanks, Dave
Sorry, there was a problem. Please try again later.
