Can you hook up an EQ using one of the input lines null

I have just successfully integrated an EQ to my Sony STR-DH190. An inexpensive new $70 EQ. Learning that without the typical Tape Back loop, the EQ was not compatible with this AV receiver. After researching and attempting a couple work arounds, I am happy to report success. Allow me to explain. I purchased the Sony STR-DH190 for my front room. I wanted an inexpensive receiver with a Phono input, so I could play vinyl in the main area of the house. This was my main goal. Everything was going well. I just felt like during playback of typical vinyl, I achieved more than enough volume. The Bass and Treble settings were fine for getting some basic sound variance. But there was some definite room for shaping sound to fit good vinyl playback. I realized I did not need to EQ the receiver for all external device playback. It sounded fine for Bluetooth sources and assuming the same for Tape, CD, or MP3 if decide to add. So I decided to try direct EQ of the Turntable. and only the TT. Success ! As the low level of the TT would not be sufficient as in input for the EQ, I picked up a $30 Phono Preamp. So, turntable to preamp, preamp to EQ (aux input), EQ to Receiver on Input 1. It very much achieved the desired result. No issues with it so far and sound is shaped better than expected. Volume is excellent. No hum or distortion. If this fits your need, I highly recommend. Phono Preamp $30ish. All in all, this is exactly what I hoped for !

Hi Denali, thank you for your inquiry. Unfortunately, no. An equalizer needs to be connected to the tape monitor loop on an AV receiver in order to operate. The current line of Sony® receivers do not have a tape monitor loop. For this reason, it is not possible to connect an add-on equalizer to current Sony® AV receivers. NOTES: Most Sony® receivers feature a built in Digital Signal Processing (DSP) Equalizer. The addition of an equalizer is not needed, and would provide no additional benefit to the overall sound output of the receiver. Hope this helps! Regards, Sam

“Can you hook up an EQ using one of the input lines”

Asked by Denali 4 years ago

Answer This Question

See all questions & answers

Sony - STRDH190- 2-Ch. Stereo Receiver with Bluetooth & Phono Input for Turntables - Black-Front_Standard

1-2 of 2 Answers

I have just successfully integrated an EQ to my Sony STR-DH190. An inexpensive new $70 EQ. Learning that without the typical Tape Back loop, the EQ was not compatible with this AV receiver. After researching and attempting a couple work arounds, I am happy to report success. Allow me to explain. I purchased the Sony STR-DH190 for my front room. I wanted an inexpensive receiver with a Phono input, so I could play vinyl in the main area of the house. This was my main goal. Everything was going well. I just felt like during playback of typical vinyl, I achieved more than enough volume. The Bass and Treble settings were fine for getting some basic sound variance. But there was some definite room for shaping sound to fit good vinyl playback. I realized I did not need to EQ the receiver for all external device playback. It sounded fine for Bluetooth sources and assuming the same for Tape, CD, or MP3 if decide to add. So I decided to try direct EQ of the Turntable. and only the TT. Success ! As the low level of the TT would not be sufficient as in input for the EQ, I picked up a $30 Phono Preamp. So, turntable to preamp, preamp to EQ (aux input), EQ to Receiver on Input 1. It very much achieved the desired result. No issues with it so far and sound is shaped better than expected. Volume is excellent. No hum or distortion. If this fits your need, I highly recommend. Phono Preamp $30ish. All in all, this is exactly what I hoped for !
Answered by equalizersuccess 1 year ago
Sorry, there was a problem. Please try again later.
Hi Denali, thank you for your inquiry. Unfortunately, no. An equalizer needs to be connected to the tape monitor loop on an AV receiver in order to operate. The current line of Sony® receivers do not have a tape monitor loop. For this reason, it is not possible to connect an add-on equalizer to current Sony® AV receivers. NOTES: Most Sony® receivers feature a built in Digital Signal Processing (DSP) Equalizer. The addition of an equalizer is not needed, and would provide no additional benefit to the overall sound output of the receiver. Hope this helps! Regards, Sam
Answered by SonyListens 4 years ago
Sorry, there was a problem. Please try again later.