Questions & Answers

Name: Whalen Furniture - 3-in-1 Console for Most Flat-Panel TVs Up to 65" - Brown Cherry
Brand: Whalen Furniture
SKU: 8482006
Price: 49.99 USD
Rating: 4.7 (5250 reviews)

Whalen Furniture - 3-in-1 Console for Most Flat-Panel TVs Up to 65" - Brown Cherry

Model:: BBXL54NV; |
SKU:: 8482006

User rating, 4.7 out of 5 stars with 5250 reviews.

Highly rated by customers for:

Clearance

Save $199

$248.99

Show only Answered Questions

Include AI Generated Q&A

Page Showing 61-80 of 485 questions

Ask a Question

QuestionMy TV has a VESA pattern of about 660 x 330 mm. What is the range that this stand supports?
Asked 5 years ago by Malater.
- Answer Hello Malater. Thank you for your interest in our TV stand. The VESA patterns supported are: 100x100mm / 200x100mm / 200x200mm / 200x300mm / 300x300mm / 200x400mm / 400x300mm / 400x400mm / 600x400mm. Feel free to contact Customer Service at 1-866-942-5362 if you need further assistance.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionWill this hold a 65 inch q80t . I was promised by a sales representative that it would, I just wanted to be sure
Asked 5 years ago by Connor.
- Answer Hi Connor. This TV stand can accommodate up to most 65" Flat Panel TV's with a maximum load of 135 lbs. The monitor brackets have a universal pattern and can accommodate the following VESA patterns: 100x100mm, 200x100mm, 200x200mm, 200x300mm, 300x300mm, 200x400mm, 400x300mm, 400x400mm, 600x400mm; pleaser refer to your TV manual for confirmation of the VESA pattern of your TV model.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionIs this unit height adjustable?
Asked 5 years ago by Height.
- Answer The overall height no, however the Spine can provide two height options for the TV set. Refer to your TV size and adjust the Swiveling Bracket to the desired height for optimum viewing!
  Answered 5 years ago by Supplier Product Expert
  Answer this question
Questioncan the tv mount swivel
Asked 5 years ago by StevieB.
- Answer It can. Almost a full 180° turn so it can go left or right
  Answered 5 years ago by JayPNW
  Answer this question
QuestionI'm trying to assemble this but part J only has 2 screw holes, instructions say it should have 4 and the mounting bracket has 4. Can I still mount this to the stand? I have an LG CX 65" tv that I want to mount, approx 60 pounds.
Asked 5 years ago by kden.
- Answer Hi Kden, part J-Mounting Frame should have 4 holes; please contact customer service at 1-866-942-5362 to assist you with a replacement part.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionWhat are the dimensions of the package/box? I would like to know if this will fit in my car.
Asked 5 years ago by JohnnyBravo.
- Answer Hi JohnnyBravo. The box dimensions are 52" W x 20.88" D x 7.88" H (approximate box weight 91.49 lbs.)
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionI just bought this and set it up and realized that the stand is only for 60 inch TV. I have a Samsung 65 inch QLED and I want the stand. the weight is well under what the unit can hold. Can I still put it on the stand?
Asked 5 years ago by JimJim.
- Answer Yes I can put the TV on the stand
  Answered 5 years ago by Sergio
  Answer this question
QuestionCan I use this stand for mounting my LG OLED CX 55''? Is the mount on this stand compatible with the holes on my TV? LG OLED CX has lower holes so I am thinking the TV when mounted will be higher than other TVs.
Asked 5 years ago by Blue.
- Answer There are 2 matching pieces that fasten to the TV. The upper half has holes, the bottom half has slots, which should fit any tv out there and allow these two pieces to attach high, low, or the middle or your tv.. They give you a multitude of 4 sizes of screws, washers, and spacers that also should fit any tv. Check your LG closely, you should have 4 threaded holes in the back.
  Answered 5 years ago by Consoleand65inchTV
  Answer this question
QuestionDoes it come with screws to attach television to the mount?
Asked 5 years ago by George.
- Answer Yes it does, in several sizes for different tvs
  Answered 5 years ago by Vger
  Answer this question
QuestionWill this work with a 65 inch Samsung curved tv model MU6500?
Asked 5 years ago by StuartB.
- Answer Hi Stuart, this console was tested to hold up to most 65" Flat panel TVs, maximum weight of 135 lbs., with a flat or curved/recessed back.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionI purchased this like 5 years ago and its great, but im going to upgrade to a 75inch tv can i re place the mount so it would hold a bigger tv ? Or do i have to buy a all new stand also.
Asked 5 years ago by Cruz.
- Answer Hi Cruz. This 3-in1 TV stand was manufactured and tested to hold most flat-panel TVs up to 65" and 135 lbs. only. We do not recommend mounting anything larger/heavier than what it is stated on your manual.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionWill this stand support a 70" tv?
Asked 5 years ago by Gary.
- Answer Hi Gary. This TV console was only tested to hold most flat panel TV's up to 65 inches and with a maximum weight load of 135 lbs. We do not recommend using with anything larger/heavier than specified on your instructions.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionWe have this stand can we put a 70 in tv on there or should we get a different stand?
Asked 5 years ago by Shinji.
- Answer Hello Shinji. This TV console was only tested to hold most flat panel TV's up to 65 inches and with a maximum weight load of 135 lbs. We do not recommend using with anything larger/heavier than specified on your instructions.
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionCan this stand accept a VESA 600mm x 400mm back pattern?
Asked 5 years ago by SoLeCoLLeCtOr.
- Answer Hi TVBuyer! Yes, our TV stand will accommodate a 600mm x 400mm VESA back pattern. Thanks for your interest!
  Answered 5 years ago by Supplier Product Expert
  Answer this question
QuestionIs there a longer spine assembly for BBXL54NV ? From 6” - 1’ taller at least.
Asked 6 years ago by MikesTV.
- Answer Yes there are longer spins or I can just move the adjustment down lower to raise the tv higher
  Answered 6 years ago by Bighoward
  Answer this question
QuestionWill this work on a 43" Vizio TV ?
Asked 6 years ago by Sherry.
- Answer Yes, this will work on a 43" Vizio TV.
  Answered 6 years ago by CommunityAnswer
  Answer this question
QuestionCan the TV Mount on this console support a 55" LG B9 Series. The bracket seems incompatible against the back of the smart TV's housing unit.
Asked 6 years ago by Question.
- Answer This 3-in-1 TV console accommodates most flat-panel TVs up to 65" and 135 lbs; the monitor bracket is universal pattern, it can accommodate most VESA hole patterns.
  Answered 6 years ago by Supplier Product Expert
  Answer this question
QuestionWill the mount work with a 32’ tv? It says up to so I just want to make sure. Thank you in advance.
Asked 6 years ago by Tanya.
- Answer Hi Tanya. Depending on the actual dimensions of your TV, the mounting frame and monitor brackets might stick out on the sides/top. We suggest checking for availability of a display at a store near you to confirm (when safe to do so!). Thank you for your interest!
  Answered 6 years ago by Supplier Product Expert
  Answer this question
QuestionWill this work for curved TVs? I tried researching to see if it is suitable for curved TVs but have not been able to see any reviews about anyone trying it on curved television.
Asked 6 years ago by Jenny.
- Answer The vertical mounting brackets are adjustable ( each slide left & right ) therefore if the tv has a " flat spot " for wall mounting it should work. Pretty much if the tv is listed as " wall mountable " ( check your tv manual ) it will most certainly work. Also be aware *IF the tv is a Samsung TV -(check in the manual)- for mounting screw (4 total needed) size to be obtained at Hm depot or a local hardware store for onlyaround 5$. (some Samsung's seem to have an obscure size). Hope this helps as this is a great stand/ mount.
  Answered 6 years ago by Bamamoto
  Answer this question
QuestionMy 55 Samsung UHD TV has 4 3/8 indentations on the back. How do I connect my floor stand two it? I am afraid it is only made of plastic.
Asked 6 years ago by Meatball.
- Answer Not plastic and very sturdy also there is a channel to hold cables
  Answered 6 years ago by Bill
  Answer this question

Showing 61-80 of 485 questions

previous Page
1
2
3
4
5
6
More Pages available
next Page

Questions & Answers

Whalen Furniture - 3-in-1 Console for Most Flat-Panel TVs Up to 65" - Brown Cherry

Q: QuestionMy TV has a VESA pattern of about 660 x 330 mm. What is the range that this stand supports?

Q: QuestionWill this hold a 65 inch q80t . I was promised by a sales representative that it would, I just wanted to be sure

Q: QuestionIs this unit height adjustable?

Q: Questioncan the tv mount swivel

Q: QuestionI'm trying to assemble this but part J only has 2 screw holes, instructions say it should have 4 and the mounting bracket has 4. Can I still mount this to the stand? I have an LG CX 65" tv that I want to mount, approx 60 pounds.

Q: QuestionWhat are the dimensions of the package/box? I would like to know if this will fit in my car.

Q: QuestionI just bought this and set it up and realized that the stand is only for 60 inch TV. I have a Samsung 65 inch QLED and I want the stand. the weight is well under what the unit can hold. Can I still put it on the stand?

Q: QuestionCan I use this stand for mounting my LG OLED CX 55''? Is the mount on this stand compatible with the holes on my TV? LG OLED CX has lower holes so I am thinking the TV when mounted will be higher than other TVs.

Q: QuestionDoes it come with screws to attach television to the mount?

Q: QuestionWill this work with a 65 inch Samsung curved tv model MU6500?

Q: QuestionI purchased this like 5 years ago and its great, but im going to upgrade to a 75inch tv can i re place the mount so it would hold a bigger tv ? Or do i have to buy a all new stand also.

Q: QuestionWill this stand support a 70" tv?

Q: QuestionWe have this stand can we put a 70 in tv on there or should we get a different stand?

Q: QuestionCan this stand accept a VESA 600mm x 400mm back pattern?

Q: QuestionIs there a longer spine assembly for BBXL54NV ? From 6” - 1’ taller at least.

Q: QuestionWill this work on a 43" Vizio TV ?

Q: QuestionCan the TV Mount on this console support a 55" LG B9 Series. The bracket seems incompatible against the back of the smart TV's housing unit.

Q: QuestionWill the mount work with a 32’ tv? It says up to so I just want to make sure. Thank you in advance.

Q: QuestionWill this work for curved TVs? I tried researching to see if it is suitable for curved TVs but have not been able to see any reviews about anyone trying it on curved television.

Q: QuestionMy 55 Samsung UHD TV has 4 3/8 indentations on the back. How do I connect my floor stand two it? I am afraid it is only made of plastic.

QuestionMy TV has a VESA pattern of about 660 x 330 mm. What is the range that this stand supports?

QuestionWill this hold a 65 inch q80t . I was promised by a sales representative that it would, I just wanted to be sure

QuestionIs this unit height adjustable?

Questioncan the tv mount swivel

QuestionI'm trying to assemble this but part J only has 2 screw holes, instructions say it should have 4 and the mounting bracket has 4. Can I still mount this to the stand? I have an LG CX 65" tv that I want to mount, approx 60 pounds.

QuestionWhat are the dimensions of the package/box? I would like to know if this will fit in my car.

QuestionI just bought this and set it up and realized that the stand is only for 60 inch TV. I have a Samsung 65 inch QLED and I want the stand. the weight is well under what the unit can hold. Can I still put it on the stand?

QuestionCan I use this stand for mounting my LG OLED CX 55''? Is the mount on this stand compatible with the holes on my TV? LG OLED CX has lower holes so I am thinking the TV when mounted will be higher than other TVs.

QuestionDoes it come with screws to attach television to the mount?

QuestionWill this work with a 65 inch Samsung curved tv model MU6500?

QuestionI purchased this like 5 years ago and its great, but im going to upgrade to a 75inch tv can i re place the mount so it would hold a bigger tv ? Or do i have to buy a all new stand also.

QuestionWill this stand support a 70" tv?

QuestionWe have this stand can we put a 70 in tv on there or should we get a different stand?

QuestionCan this stand accept a VESA 600mm x 400mm back pattern?

QuestionIs there a longer spine assembly for BBXL54NV ? From 6” - 1’ taller at least.

QuestionWill this work on a 43" Vizio TV ?

QuestionCan the TV Mount on this console support a 55" LG B9 Series. The bracket seems incompatible against the back of the smart TV's housing unit.

QuestionWill the mount work with a 32’ tv? It says up to so I just want to make sure. Thank you in advance.

QuestionWill this work for curved TVs? I tried researching to see if it is suitable for curved TVs but have not been able to see any reviews about anyone trying it on curved television.

QuestionMy 55 Samsung UHD TV has 4 3/8 indentations on the back. How do I connect my floor stand two it? I am afraid it is only made of plastic.