“How do I calibrate my water dispenser? The LED light say's 8 oz, when the actual amount is only 5 oz”
Answer This Question
1-2 of 2 Answers
It cannot be calibrated. It was an estimate for average water pressure which can vary from place to place. You can be sure the valves are all fully turned on that lead to the refrigerator all the way to the inlet.
Sorry, there was a problem. Please try again later.Hello Ballers! Please see pages 13 and 14 for more information on how to Calibrate the water dispenser. We hope this helps. https://bit.ly/3dbCVKf Calibrate Measured Fill Household water pressure may affect the accuracy of the Measured Fill feature. For optimum performance of your water dispenser, you must first calibrate Measured Fill. IMPORTANT: Flush the water system before calibrating Measured Fill. 1. Place a sturdy measuring cup (1 cup [237 mL] size) on the dispenser tray, centered in front of the water dispenser pad. NOTE: Depending on your model, a measuring cup may be provided. 2. Press and hold the OPTIONS and LOCK buttons at the same time for 3 seconds. The words “Back” and “1 Cup” will appear on the display screen. Also, “CALIBRATE” will illuminate and remain lit while the Measured Fill feature is being calibrated. NOTE: You may press the ICE TYPE button under the word “Back” at any time to exit calibration mode. The display screen's “CALIBRATE” text will turn off. 3. Using your hand (not the measuring cup), press and release the water dispenser pad in order to dispense water to the 1 cup fill line. NOTE: If overfilling or spilling occurs, discard the water and press “Back” to restart the calibration process. 4. When 1 cup of water has been correctly dispensed into the measuring cup, press the MEASURED FILL button under the word “Confirm” to confirm the calibration. When Measured Fill calibration has been confirmed, the display will return to the home screen.
Sorry, there was a problem. Please try again later.