Customer Ratings & Reviews

Our baby takes formula more often than breast milk. Before I found this machine, making bottles at night and early morning was tough and messy, adding to the stress that if your baby is screaming. Since we got this Baby Brezza Formula Mixer, we use it to make every bottle. It can make a bottle right away... Yes, I mean literally formula milk will come out immediately by just clicking the "Start" button. You can adjust the temp, ounces and formula setting, right in the dashboard. Just make sure that you assemble the formula container correctly based on the manual. If you don't, the machine may not work properly. And even though you do need to clean the funnel every 4 bottles made, it's not a big deal at all and makes great sense since the funnel is a place to hold mixed formula before it comes out. Funnel is easy to wash just by hands and easy to put back on when it's dried. The formula container is recommended to be cleaned every week and cleaning is also easy. Strongly recommend for parents who have bottle-taking babies.

This has a 3 temp setting: room temperature, body temperature and "warmer than body temperature" (which is NOT hot) the temps are perfect as baby grows! You can also set the formula "brand" by choosing the setting number on their website and a great feature is being able to increase or decrease by 1 OZ increments instead of 2 like most machines. It will tell you to clean the dispenser spout about every 6th or 7th time using it, but that should be done anyway for baby's sake. The spout is easily pulled out, cleaned and put back. This is my 2nd one. We keep one in the kitchen and one in baby's room in the lower level of our home (no running up and down in the middle of the night!) The water tank is tucked in the back and the whole machine is about the size of a small Keurig. The powder tank on top holds about one 19.5 or 20oz container of formula. It has mixed right every time for us and the temp is always spot on. It dispenses in literal seconds. Pop the nipple on and your ready to feed baby! No more boiling on stove, warming under water or whatever other method you are using. Also has a wonderful "warm water" feature that we have used when friends visit and need to mix other formulas or what not. A definite must for parents! Easy Breezy! **Please note! this is not for formula concentrate or any liquid formulas of any kind.

Worked great with one kind of formula, is unusable with another. When we switched to Enfamil AR, thats when our issues began. The formula builds up on the inside of the funnel within 1-2 uses. The amount of formula is significant, obviously an issue because your baby will be getting too much water vs formula. Our baby began having an upset tummy and refusing the bottle as we continued to try and work through the brezza's issues. Even cleaning the funnel after each use didn't prevent a large chunk of formula from remaining in the funnel. I used to love this machine, now its an overpriced water dispenser. We have multiple funnels because you're supposed to clean them after every four uses. Customer service rep was rude and unhelpful, assured me nothing I was asking about was covered by warranty before he even tried to answer my questions. This was the one time I was looking forward to completing the usual survey after a support phone call.

Overall, this is indeed a time saver. If it's the middle of the night and you are tired, a simple press of a button is all you need to get a bottle ready. The temperature seems to be perfect and the speed of how quick the formula comes out is greatly appreciated. Where this product falls a bit short is how often you have to clean things. Now I understand, like anything you're using to generate food, it needs to be cleaned. You have to at least wipe the dispenser and the hole that is covered when the powder isn't being mixed after about every 4 or 5 bottles. May not seem like a great deal of effort but you notice it fairly quickly. That's really the only reason I'm giving it 4 stars instead of 5. Well, I guess cost too because it is kind of pricey. Otherwise it's a solid machine.

Expensive for what it does. Does help me because my infant goes from 0 to 100 really quick when he wants a bottle and this thing makes it under 15secs. Very convenience. Visually good looking. Mixing is so so. Well thats the upside, lets dig into the downside. Expensive for what it offers, they could aleast throw in a bottle or a extra mixing tray. Annoying that the machine won't make a bottle unless the mix tray is cleaned after every 4th bottle made. Manually have to move platfrom for different bottle size. Starting to see unmix formula. Different setting for different formula via brand. I see it waste more formula than save due to formula crusting at the wiper part via when cleaning the mix tray you have to wipe the wiper part and boy you will get good chunk of crusted formula everytime.

I've used this for year so I can finally provide my 2 cents. Overall its a great product and I would recommend it for parents with newborns with a few caveats. Pros: - It is extremely convenient, especially when you have a hungry newborn who can't wait to be fed. - Very user friend to operate. You basically calibrate it based on the formula (very important), set the temperature and size of the bottle and you are good to go. - Small form factor doesn't take up a lot of real-estate so it can basically be placed anywhere. - Refilling the formula and water is easy and straight forward. -Interface with warnings and Cons: - The maintenance is a bit tedious and time consuming. You are limited to only making 4 bottles because the "clean" warning appears which will prevent you from making anymore bottles. This can be an issue because you have to time the cleanings based on your babies feeding schedule. - Cleaning the parts is also very cumbersome sometimes because of the interlocking components within the formula container. The part where the formula and water mix and goes into the bottle can get all gunked up and its a pain to try and remove all of the residue and caked formula out of. If you are on social media, you probably have seen some posts about there being an issue with the Brezza not properly providing the correct amount of formula causing the baby to be under fed. While this is a major concern, I caution you to be extra careful about what you take as fact on Tik Tok and Instagram. The tests they use to attempt to prove its not using enough formula are not scientific and if you attempt to do the same then you can potentially damage your Brezza. In my experience (whatever that is worth), my son never seemed hungry after feedings and he is off the charts in all areas. Keep in mind, your mileage might vary. I am not a doctor, engineer, scientist or health expert so take my opinion with a grain of salt. Honestly I think this was a lifesaver. Being able to easily make my son a bottle in the middle of the night, half a sleep by just pressing a button was amazing. Its a bit pricey but I think its worth it. If you are worried about your child not getting enough formula, you can still use the Brezza to dispence the heated water and you can manually add the formula.

So I wasn't convinced about this when my wife sent me to the store to buy it, it's easy enough to wait for warm water, measure out the powder and shake, but our kid was having a spit up problem and this kept the bubbles out apparently. So after I used it about 1 time I was utterly convinced this was the best thing invented in a long time. it takes about 3 seconds to make the bottle, there is no measuring, and it is just way too simple. I love it. The one main thing that I think they could have communicated better is that the funnel has to be cleaned after about every 4 uses not daily, that is about the only thing. I my mind this was well worth every penny spent on it.

The short summary: We bought this to mix formula with less bubbles than by hand. It did so and the resulting mix worked far better for our child. We'd buy this again without hesitation. It deserves more than 4 stars but it's not quite a 5 star product for us. Unfortunately, the rating system doesn't allow for 4 and a half stars. The long version: This review is about our experience with the Baby Brezza. Why we bought it and how it works for us. Why did I buy this: When we transitioned from breast feeding to formula our bundle of joy had issues with the air bubbles that occur in mixed from dry formula. If you're a new parent, you'll soon understand that there's a certain kind(s) of upset your kid will get to that you'll do just about anything to ease. We tried different formulas, different ways of mixing said formulas, only to experience another hours long blood curdling, heart wrenching scream-fest after a feeding. Another mother suggested we check out the Baby Brezza. Along with reading through the products website, I Read a few reviews where folks described that the product alleviated similar situations to ours. Despite the cost, that was enough for me to pull the trigger on trying this device. An online purchase and in store pickup at Best Buy and this thing was in our house, but not quite ready to go. Setup: There a bit of setup prior to using this thing. You need to wash all the parts and make sure they are bone dry before putting it back together, filling with water and formula, and letter her rip. Using the Baby Brezza: You fill the top bin with formula. Then set the number on the display for the type of formula you are using; they give you a chart and you can also find it online. You only have to do this once, or when/if you change formula brands. Select a temperature; there are three. Fill the water reservoir. Set your amount in ounces, place a bottle on the tray, and press start. It quickly dispenses a almost bubble free mix at your desired temperature. Note, our unit always makes .5 ounces more than selected. If you do get any bubbles, a few horizontal circular swishes of the bottle takes care of them. Unless you need to change temp and ounces during the day, general use only requires hitting the Start button with occasional filling of the water and formula reservoirs. The result: Happy baby, no screaming. Also, we really do find it to be convenient. While this wasn't our goal going into this, we'd buy it again just for how simple/quick it makes things. It's one of the quickest ways to may a bottle. We're talking seconds. The Tray (AKA What's not to like?): The tray attaches to the device via a hole that friction fits onto a set of protrusions located on the backsplash of the device. This friction fit can fail, even after checking to make sure it's secure. Having one bottle spill, we assumed the tray had become loose. So we started making sure it was secured prior to making a bottle. This worked for a while until we increased the volume of the bottles we were making. We use glass bottles which are a bit heavier than the plastic versions. I speculate this weight plus 4 ounces or more of formula seems to exceed what the tray can consistently handle. After having three very full bottles spill between my wife and me, we simply won't trust the tray. You have a child crying for a bottle and instead of giving them what they need, you're cleaning formula off the counter, drawer and cabinet fronts, and floor; now the baby isn't the only one crying. We now hold the bottle while the device dispenses formula. I'm describing this failure for two reasons. One, because it's a ridiculous failure point for a beverage dispensing product. As someone involved in product development, I'd love to hear from Brezza's design team on how this was the best they could come up with. I must say, if any other beverage dispenser spilled the very drink it was making due to a design flaw, it would no longer be in our house. Which leads me to reason number two; we STILL use this thing and will continue to do so. Standing at the machine holding a bottle while it dispenses is still pretty dang quick. Appearance: It's friendly enough looking, but it's white and black "cop car" color scheme and cheap looking control panel aren't making it the centerpiece of anyone's counter. This is unabashedly a baby product. We weren't buying this for looks. Overall: It's not the prettiest product on our counter top and it has it's quirks -I'm looking at you drip tray… but overall the Baby Brezza made a night and day difference for our child and made things quick and easy for Mom and Dad. I'd buy it again and we recommend it to others.

What a great item to buy! You want to save time, well buy this and one touch of a button, the bottle is reasy for feeding. Only thing is be detail on cleaning it, dont want any mold growing anywhere, never experienced it but just saying

People laugh when I tell them I basically have a Keurig for my baby's bottles. They say it's so unnecessary. Trust me, it's worth every penny. Once you switch from having to prep a bottle, warm it up and all of that at 3am to simply pressing a button and getting a perfect bottle at the perfect temperature, you'll never go back. BUY IT

This makes night feeding so much easier, especially when you’re exhausted. Making bottles is so easy, just a press of a button. The temperatures are great and the mixing is fast. But there are two problems: the constant cleaning of the funnel and the formula powder build up in the funnel. You have to clean the funnel every four bottles. At first it wasnt a problem, but when you’re up with your baby late at night and just need a bottle, it gets annoying when you see the LED telling you to clean the thing. The other problem is the buildup of formula in the funnel. Its concerning how much formula powder is stuck in the funnel before cleaning. I understand thats the reason to clean the funnel, but i often wonder how accurate the mix of every bottle is if so much formula is stuck in the funnel.

The baby brezza is good for the most part, but I initially had to bring the first one back because of its malfunction within the first 4 days. It would spit out baby formula all over the place. Since it has been replaced it’s been working like it’s supposed to, but I had to add warranty and go through a whole exchange process. I suppose I had a defective one. It happens. One a brighter note I love it because it makes your traditional bottle making in 1/2 the time, it’s easy to use and easy to clean

It helps so much to save time over the night when the baby asks for food. All you need to do is grab a bottle, place it under the dispenser, push start. Happy baby and happy parents.

First off let me tell you as a first time mom this is great! I didn’t think I would need a Keurig for my baby bottles... but feeding every 2 hours in the dot in the middle of the night and sometimes spilling formula or water everywhere it can get to you... I finally got this and it’s night and day. Very easy to use and change setting because she eats 2-3 oz I can easily switch back and forth. Comes with 3 temperature setting which is lovely for during the winter and in the summer I can use the lowest which is room temperature. I gave it 4 out of 5 stars solely because you have to change out the funnel every 4 bottles but you get used to it I guess. And by accident when I was changing the formula out I took the base off to wash it and I saw build up of what seems like MOLD or gooey gunk. It’s horrible they don’t advise you to was this often as well because we are feeding this crap to our babies every time. I defiantly do recommend buying this however, for the steep price you would figure they advise customers to clean all parts often to protect their babies AND hopefully they come up with a different piece to replace having to wash the funnel every 4 uses.

It’s one of those devices that you don’t know you need until you actually use it and then can’t imagine life without it. Cleaning is tedious but worth it for the time you save not having to prep a bottle.

Absolutely worth it. Saved so much frustration, especially in the middle of the night. It’s easy to clean and maintain. Use their site to find the right mixture rating for the formula you use. So far the best thing we bought for our baby( and ourselves!)

The product is really great my only two issues are it keeps telling me to clean the funnel when it's already clean & also i have to hold the bottle because the piece that's supposed to hold the bottle wont stay up properly

This machine will change your life!! It is time saving and comes out at the perfect temperature every time.

It’s costly but worth every penny when satisfying a newborn and adjusting to lack of sleep. LOL. No more preparing bottles as baby screams in the wee hrs breaking your heart. One button, put on nipple, and run. The only con is every four bottles you are taking off the dispenser piece to clean and others days you are doing other maintenance. Annoying. My solution so far is that I purchased an additional dispenser accessory so I interchange them.

It’s like a keurig for your baby. Making bottles are so easy with this! I know everything is mixed perfectly, it’s mess free and better for my baby because it has less bubbles than hand mixing. Cleaning it is a pain, but it’s a fair trade off. This saves you from buying a warmer too or at least a warmer for your house. You can change the ounces, formula and temperature. Plus it looks nice in your kitchen or nursery. Bottom line is this isn’t a must have but if you have extra to spend, I would definitely get this product.