Customer Ratings & Reviews

This is Bambu Lab's flagship product and it is a well-deserved designation. The speed and waste reduction are fantastic compared to the X2D that I used to have. The Vortek system allows up to 6 colors be assigned to individual hotend/nozzles at one time on the right side of the toolhead and one color to the left side. I bought an additional AMS 2 Pro unit (total of two) and an AMS HT and they all flow through the optional filament track switch. That means I have 9 colors available at one time and the filament track switch automatically routes each filament to the optimal toolhead side without having to move spools around. The machine is a beast and works around the clock at times. It's tempting to get up at all hours of the night just to check & see what progress is being made. I highly recommend this printer but not for someone just learning about 3D printing. There is a significant learning curve. Photo is of my printer with the AMS units sitting on optional risers.

Very satisfied with this printer and Best Buy's order processing. Arrived on time and in perfect shape. The printer has performed flawlessly, after the half hour setup routine, it hit the ground running. Printed a number of things off of Bambu Lab Makerworld site, reel adapters for 1/2 kilo filament spools (the threaded cylinder in the picture is a part of that, threads printed beautifully) and the other parts in the pictures is an articulated vacuum hose, intended to evacuate fumes from a laser engraver. The print tolerances are excellent (the quality of models on Makerworld is great). All in all, like I said, I'm extremely happy with this printer.

The Bambu H2S is by far the best printer I've used. My first printer required endless tinkering and leveling and would still throw bad prints all the time. It was so frustrating I walked away from 3d printing altogether. Fast forward to today, and this is truly a plug and play experience. I'm so glad I pulled the trigger on this printer. You can print all the things - from hobby items to costumes to functional prints! The only limitation is your imagination. If you spend some time learning the ins and outs of the slicer software, you can truly create one of a kind items. 10/10 I would recommend this printer to all levels of users. It's welcoming for newbies and capable of satisfying the most demanding creators.

This is my first printer, so I’m still really new to this hobby, and still learning a lot. The printer was pretty much ready to go out of the box! Setup is pretty straight forward, and if you need more help there are plenty of videos on YouTube. I’ve had this printer for a month now and have around 400 print hours on it. It has worked pretty much flawlessly so far, and the only minor issue that I’ve had was user error. It was super easy to resolve with the AI assistant that gave me a QR code to scan and took me straight to troubleshooting steeps. Everybody that sees the prints all comment on the quality of them and how nice they look. Multi color prints are effortless and they look amazing! IG you are new to 3D printing, or just looking to upgrade then I highly recommend the Bambu Lab H2C.

Love this printer, it’s a 4th 3d printer for us, it joins an Ender 5, and two self Built Voron printers. Since getting it, it has printed a total of 130 hours printing pieces for our hydroponic garden. I’ve attached an image of one of them. Since getting it we have ordered the OEM .6 and .8 nozzles, it has significantly decreased our print times, with out any loss of print quality. We have used several types of filiment, ABS, PET-G, Carbon Fiber, etc and they all work great. We have not had a print fail yet, and it has flawlessly change from one role of filiment to the next as it ran out. We have even experimented with a few multi color prints, and prints using one material for support and another for the actual print. This makes printing so much easier that with any of our other 3D printers, i expect to purchase another one of these soon.

Great 3d printer!! Easy to use for first time users. Takes a while to unbox and setup, but works great right out of the box. Fast and easy to print multi colors thanks the the AMS. Also added the AMS HT...

Love this 3D printer. We started with the P2S and then ordered this one 2 eeeks later. While we love the P2S, this printer is much larger, faster and very little filament waste. Both our 3D printers have run nonstop since we got them. We were brand new to 3D printing and Bambu pinters are extremely user friendly and Bambu studio is easy to navigate and Makerworld has a ton of excellent free print files.

This printer is a work horse. The AI software is amazing and will catch failed prints if there is any. The printer is very easy to use and the program is also easy to use, coming from a beginner. This printer is great addition to my P2S.

This is my third H2S. They perform perfect after step by step set up. The print quality is fantastic, a real work horse. Doesn’t save time over any other printer but it allows you to print more items so you’re only tying up 1 printer vs several!

We have printed quite a bit with it over the past couple of months and have been extremely satisfied with the quality of the machine and the models we've printed.

I’m extremely impressed with the Bambu Lab H2D AMS Combo. The print quality is outstanding, the speed is incredible, and the multi-color system works very smoothly. Setup was simple and calibration is almost fully automatic. I run multiple printers daily for production, and this machine has quickly become one of my favorites. Very solid build, reliable performance, and excellent results right out of the box. Highly recommended for both hobby and business use.

I’m beyond frustrated with Bambu labs products. I have over 6 years of 3d printing experience I haven’t had this much issues with printers since the creality ender days where you had to manually adjust and replace stuff to make it reliable. I’ve had creality, flash forge printers and switched to Bambu when they were kick starter. I had the p1s then added ams unit and had over 4,xxx hours on that printer and never had any issues beside ams tubes clogging but otherwise the printer it just worked. Then I had A1 mini which was another fantastic printer no issues. I regret getting rid of those printers. I had 4 p2s printers each of them failed range from 10 hours to 65 hours, got tired of returning to exchange so I bought the h2d which I’ve have for a few weeks and this was a nice upgrade and the print quality were fantastic and the unit runs quietly however after 67 hours I ran into failure after failure with the printer don’t matter the print file is or filament I should have listened to my buddy about the issues he had with his h2d and h2c. Had reset printer 2 times reversed update, new update, dry filament, change hot ends, recalibrated several times doing auto, and manually nothing works, print quality is horrible every print there holes or it just doesn’t put filament down in the correct spots, nozzles constantly leaking filament even with the nozzle blocker. don’t matter on temp settings that’s using Bambu and sunlu filament didn’t have any issues until then. Parts stick to bed fine but the print head will pull part off due to the other nozzle leaking filament and it gets into print. The ams has been nothing but problems every single ams slot when in use says high tension detected in said slot please check filament. It would do it every other print. I’m not sure what happen to Bambu quality control but this wasn’t what I was expecting. Having constant down time I can’t print for the game store I print for and or people. Gonna look at a different brand or go back to a p1s for reliability. I wouldn’t buy this.

I upgraded from the A1 to the H2S about a week ago and honestly it feels like a huge step up. The packaging was super solid, everything was secured really well so nothing could get damaged on the way. Setup was quick and easy and I was printing right away. The print quality is great and super consistent, and it’s noticeably faster than my A1. Every print I’ve done so far has come out clean without much tweaking. One thing I’ll mention is that this thing is heavy and it does shake a bit when it’s running, so you’ll definitely want it on a sturdy table. Overall I’m really happy I made the switch. The H2S has been rock solid so far and it’s cranking out awesome prints every time.

Hands down the best printer I own. I have 3 other Bambu printers (2 X1C w/ AMS and an A1 mini ). Also had and elegoo and anycubic, but this printer's size and multicolored capabilities just surpasses them all. Big bed size, comes with an AMS 2 pro, great new features compared to my X1 Carbon. Like all Bambu printers it is easy to set up and start printing. HIGHLY RECOMMEND!

The printer is an absolute beast and runs flawlessly. The print quality is outstanding, and the Bambu Lab ecosystem makes everything effortless. As a company, Bambu Lab has clearly thought through every detail, especially when it comes to handling errors. I was printing straight out of the box, and having pre‑ordered filaments made the experience even smoother.Have already printer bunch of toys and home stuff.

As this is my first 3D Printer I’m by no means the goto authority on them but I will tell you this machine is amazing. I’ve had 2 issues and both were caused by user error and very easy to remedy. This thing prints everything beautifully. I have printed PLA, PETG and ABS thus far and adhesion has not been an issue. The heated chamber so far has eliminated the warping I have heard so much about with large prints in ABS. I had a concern about printing ABS without venting outside but there is no need. I had more odor from PLA & PETG until I ordered the external carbon/HEPA filter attachment from VOXEL and that has even been eliminated. I have an air quality meter that I keep right next to my printer and I have moved it all around the printer during ABS prints with no increase in VOCs or air quality whatsoever. I even put the meter inside the printer during an ABS print to confirm its sensitivity and it worked as expected setting off both air quality and VOC warnings. I’m currently printing an ABS desiccant drying spool and you can see in the picture that the air quality is good. This machine has really made the process of learning to 3D print very enjoyable. Bambu Lab has not only made a great product but the ability to upgrade that product at will to do laser engraving and cutting or to install their Vortek system if you find yourself wanting to do multi-colored prints without the waste of material through filament swapping. So far I am unbelievably impressed and pleased with this purchase and the experience that came with it.

These printer's are major work horses... they are very user-friendly and are amazing for beginners... unboxing and setup takes about a hour... after that... you can print your heart out... I would refer everyone hows getting into printing to buy the Bambu Lab series...

This is my fifth Bambu printer after having their X1C, A1 Combo, P1S Combo and an A1 Mini and as usual Bambu Lab doesn't disappoint. This time I chose the H2S because I wanted a larger build volume. I like everything about this printer especially how quiet it is when compared to my P1S. Super happy with this machine so far.

This is my first 3D printer and when I read that Bambu Lab had finally got it right, it wasn’t hype. Ready to go right out of the box. Never expected to be able to print something as big as the D3P riser in my pic. Very pleased and I would highly recommend as a first printer if you want to be productive and not constantly fight to get things working.

Ive had Bambu lab printers in the past, so I have come to expect greatness. This one did not disappoint. It's big enough to do a lot of things. Print quality is amazing like all bambu lab printers. If you are on the fence about one of the other H series printers, just get this one. It does everything the others do but you can do multi colors and materials. It's also pretty fast. No problems or complaints. Just a solid printer.