Customer Ratings & Reviews

Since this wasnt in stock, I picked up an X1C. That was a fantastic printer, but decided to buy the P1S to try it out once it was in stock. Ended up returning the X1C and keeping the P1S. Same preformance, for a cheaper price. This is as plug and play as you can get for a 3D printer. I was also considering a Creality machine and almost pulled the trigger on a K1C, thank god best buy started selling the Bambu Labs series. The AMS is seamless and only makes a slight noise when pulling in filament. As for the printer itself, it can be loud. Not outrageously, but I have it next to my desk setup and my microphone can sometimes pick it ip. Prints come out fantastic. Im looking to upgrade the hot end and extruder to allow dor carbon fiber filaments, essentially turning this into an X1C. The biggest flaws in my opinion are the camera and screen. The camera leaves much to be desired, especially since I had the short experience with the X1C’s 1080p camera. You’d be lucky to get 1-2 fps on the P1S’s camera - yes it is that bad. For simply checking on your prints remotely I would say it is serviceable. But if youre like me and would like to pull up the feed and watch the printer do its thing while at work, its not gonna happen. The screen id say is less egregious. If I didnt try out the X1C’s screen I dont think I would be complaining. Its not awful, just not as streamlined and intuitive as the screens on other models from Bambu. Youre basically going to control the printer with your phone. Im planning on buying the Panda Touch mod and call it a day. Overall this printer is wonderful and it is amazing that best buy is selling them. If you are looking for a future proof 3D printer I would definitely recommend this model. The simple aspect of sending a print and not worrying about it is life changing. No calibration, minimal issues. Only encountered one issue where my print randomly stopped mid way, which was very frustrating. It appears to be the SD card that comes with the printer is not the best quality and it failed. For some reason you need an SD card to print anything. After replacing it has been a wonderful workhorse.

I recently purchased the Bambu Lab P1S 3D printer, and I can confidently say it’s been a game-changer for my 3D printing projects! Right out of the box, the setup was a breeze—taking less than 30 minutes thanks to the clear instructions and intuitive design. The fully enclosed chamber with sleek plastic panels and a glass door not only looks professional but also ensures stable printing conditions, especially for materials like ABS that benefit from consistent temperatures. The print quality is nothing short of phenomenal. With its CoreXY motion system, the P1S delivers lightning-fast speeds (up to 500 mm/s) without compromising on precision. I printed a detailed Benchy in just 12 minutes on Ludicrous Mode, and the results were nearly indistinguishable from slower, standard-speed prints crisp, clean, and accurate. The automatic bed leveling is a lifesaver, consistently producing perfect first layers without any manual tweaking. The optional Automatic Material System (AMS) is a standout feature, allowing seamless multicolor printing with up to four filaments (and even 16 with additional units). Switching colors is effortless, and the Bambu Studio software makes it easy to “paint” models for vibrant, professional-looking results. While there’s some filament waste with multicolor prints, the quality more than justifies it for my projects. The P1S is also incredibly user-friendly. The Bambu Handy app lets me monitor prints remotely and even record timelapse videos, which is a fun bonus. The included PEI-coated magnetic build plate grips prints securely during printing but releases them easily once cooled. Plus, the activated carbon filter keeps odors at bay when printing with materials like ABS. P1S offers unmatched value for a printer with this level of speed, quality, and versatility. It’s perfect for hobbyists and small businesses alike. My only minor gripe is the small, monochromatic LCD screen, which feels a bit dated, but the app and software make it a non-issue. Overall, the Bambu Lab P1S has exceeded my expectations and is now my go-to printer for everything from prototypes to multicolor masterpieces. Highly recommended

I recently purchased the Bambu Lab P1S 3D printer and am absolutely thrilled with its performance! From the moment I unboxed it, I could tell that it was designed with quality and user-friendliness in mind. One of the standout features of the P1S is its impressive speed. It can produce high-quality prints in significantly less time than other printers I've used. The print resolution is fantastic, with intricate details appearing beautifully every time. I’ve printed various models, and the consistency has been remarkable—no warping or layer misalignment! The setup was a breeze. The manual was straightforward and easy to follow, and I could get the printer up and running quickly. I also appreciate the intuitive interface; navigating the printer’s settings and options is straightforward, even for someone who isn’t tech-savvy. Another significant aspect is its build quality. The robust construction gives me confidence in its durability, and the sleek and modern design looks sleek and modern in my workspace. The enclosed build chamber helps with temperature stability and improves print quality. I highly recommend the Bambu Lab P1S 3D printer to anyone looking for a reliable, efficient, high-quality printing experience. It has exceeded my expectations and has quickly become a beloved addition to my printing arsenal!

I recently picked up the Bambu Lab P1S Combo from Best Buy, and I’m beyond impressed. The printer is a great straight out of the box. Setup was fast and simple—even as someone who’s not a 3D printing expert, I had it printing high-quality models in under an hour. The print speed is very fast without sacrificing quality. I’m consistently amazed at how clean and precise my prints come out. The AMS (Automatic Material System) is a huge upgrade for me too, saves so much time The build quality is great, the software is intuitive, and the auto-bed leveling makes calibration a breeze. Whether you’re printing practical parts or creative designs, this printer handles it all with ease. If you’re looking to step up your 3D printing game, the Bambu Lab P1S Combo is the best bang for your buck. Highly recommend. 5 stars all day.

I noticed that Best Buy had these in stock at the time so decided to pick one up and try it out. One of the main reasons I decided to purchase the P1S Combo was because of a lot of 3d multi-color model were created using the Bambu slicer and I was getting tired of wasting my time converting them to us on my other color printers. Easy to order just shipped to my home it arrived quicker then shipping it to the store and came in good shape. So then the setup.. well it went ok just followed the directions and had it up and running in no time. I was surprised right off the bat everything work perfect no messing around with settings, not even networking connections. Loaded AMS and first prints came out perfect. Been using this P1S Combo for a bit now and I have no complaints except that the light inside is not really that bright. As far as the camera as some have mentioned it don't bother me as I don't use it. Printers are never left on when no one is home. So I ended up liking a lot and went and ordered the New AMS 2 Pro and that works fine with it as well. I've have had many other 3d printers but I should have purchased one of these long ago

I took my time in making this purchase, I knew I wanted to get into 3D printing especially for a small business venture I've been rattling around in my head for a few months now. So I did a lot of research and decided I wanted something with ease to take some frustration away. Enter this Bambu P1S Combo, I knew I could add on the AMS later, but why would I when I can get it together and cheaper together this way? I've done quite a few print jobs with it, even found that it's faster than some other printers out there on it's "normal" speed setting. Quality is great, and love that if there is a simple print task to be done that I can send it straight from the app on my phone. I would highly recommend this printer for anyone that wants to start out, you don't have to fight with setting up pauses and swapping out filaments or anything.

I am in LOVE with this setup. I went from a Creality Ender v2, which was a great learning printer to help understand all the nuances of the process.. to this beautiful beast with the AMS. I have only had one print issue in the first month of ownership and I’ve printed at least 25-30 things, various sizes. Highly suggest first print being a poop catcher, so it catches all the debris from the back. You won’t be disappointed with this setup at all. So fast, so perfect.

I run a medium‑sized 3D‑printing farm, so this isn’t my first machine—but it is my first P1 S, and I’m thrilled with it. The setup was painless, the print quality was excellent, it was right out of the box, and the speed had already boosted my farm’s throughput. I grabbed the printer a few days before Bambu Lab’s price hike. It’s disappointing that they raised prices ahead of the new tariffs when competitors like Creality, Elegoo, and Anycubic have held steady even a month after the tariffs took effect. That move feels out of step with the rest of the market. Pricing aside, the P1 S itself is outstanding, so the five‑star rating stays.

I recently got into 3D printing with an inexpensive 3D printer from another manufacturer that started to frustrate me. After lots of recommendations and research, I purchased the Bambu Lab P1S Combo 3D Printer. I made the right choice. So far I have done over 225 hours of printing and it has been a joy. Having 4 colored spools on hand for multi-color printing is so awesome. I can't recommend this printer enough.

Hands down the best 3d printer I have owned. No issues, no clogs, beautiful detail and overhangs from day one. AMS can be picky and I am not using anymore cardboard spools or swapping them to reusable plastic bamboo spools. Also going to work on upgrading AMS with printable savers to reduce feed errors.

Had been thinking about getting one. Tinkering is just something ya gotta do. After hour of watching YouTube and search the dark depths of the internet. I went for it. Have not regretted in the least. Very infinitive with an easy learning curve no matter nerd status. I have been knocking off projects around the house. From Faux Marble Window Sill to Silk Purple Dragon Egg. Awesome little printer.

This 3D printer is the best for beginners into 3D printing, it has a great quality and I’m loving everything this 3D printer can do for me. Bambu Labs is a great company to go with if you want to start a complete brand new hobby for yourself. Thanks BestBuy

This is a great printer for beginners to pros yes the higher levels provided by bambu can do more. The high-level printer also cost $500-$2300 more so for the price this is a great printer. Bambu has great suport and access to great a slicer and print files

Been 3d printing for quite sometime and have used multiple prints. This one by far is one of the most user friendly straight out of the box ready to print machines I have used. Very little to no tinkering and the AMS system is super simple to use as well! Definitely will be adding a few more of these to the print farm! 10/10 would highly recommend

The P1S makes it super easy to jump into 3D printing. Worked perfect right off the bat with minimal setup and assembly. Buying it from Bestbuy guaranteed super fast shipping and better than average customer service vs Bambu directly.

Great product! Plug and play so far a couple of weeks in, lots of free files in the Bambu community that get you started quick! Fastest printer I’ve ever seen!

I didn’t know Best Buy sold 3D printers but I’m glad I went with them. This P1S arrived pretty quickly and works right out of the box.

Unboxing and setup for first print was a breeze when following the video instructions. I am a newbie to 3D printing and have had no problems with the printer or quality of the prints.

I love this printer as I’m new to printing. I wanted to just start off strong get this with the AMS unit and it works phenomenally. I’ve made a few things already and look forward to learning as I go along. Bambu makes this all look so easy!

Very very high quality. I wish best buy sold the non multi color version because I hardly ever use it due to pla waste and because I like painting. But still! It's a awesome printer! I wish bambu labs the company was more open source though.