Customer Ratings & Reviews

I got excited the second I took off with these props. They sounded so much better and my sound meter showed them to be a couple of dB quieter. Smooth and snappy performance too. FAIL 100% due to total loss of video signal on spin up. Before you are off the ground, video drop. Blogs and online videos show this to be in the most factory untested product of the month club. The two spinning screws directly above the magnetic motor and antenna can’t be good for anything.

These props are quiet and very durable. However, I have noticed that when flying with these props, I lose range on flights. I completed several tests with the DJI issue props and the Bower props. I have seen the same results in different environments.

Put these on my drone and went to fly. kept getting interference on the wi-fi to tablet. 20 feet in the air lost signal to tablet. Replaced blades with original props and no problem. I went to DJI and noticed I was not the only one having this problem

These forced my drone to fly straight at me only inches off the ground when it should of been hovering. It actually caused the drone to cut me shoe I was wearing, they are very sharp. I replacement these with standard props and the drone worked perfect. Don't buy these!

I should have read reviews for carbon fiber blades for the Mavic Air. I like carbon fiber! BUT. It is not good for the Mavic Air. Being that the Air is a special wifi only drone and not an Occusync, the carbon fiber blades interfere with the signal from the remote to the drone. I did cell phone, Tablet, and Epson Moverio...Lost signal on all in two locations just taking off for accurate landing witch is 19 feet. I put the factory blades back on.....Zero problems! I did say I like carbon fiber though, so I tried it again, different day, same result. BUMMER

These props were packaged very nicely and the quality of the product was amazing! I was so excited to put these on and fly. First time out raised drone off ground and went up to 100 foot and noticed the camera lost signal. Brought it down visually changed channels and went up again...same thing lost video! Only thing I had changed was my props on this brand new mavic air. I installed the original Dji props and issue was gone. Glad I did not lose my drone because of these props!

I installed these propellers on my Mavic Air and when running they cause a loss of video signal. The drone would lift off the ground, the screen would go black and a video lost warning would pop up on the screen. I took the propellers to the DJI store in Scottsdale AZ and they tried them on one of their demo Mavic Air drones and had the same results .

I wish I had checked the product's reviews before purchasing this item in-store. There are multiple issues including the propellers not having a finished edge, propellers not being balanced, and the propellers causing electrical interference while being in-flight, causing the video signal and radio connection to constantly fail.

Purchased these to see if they would be quieter and results were about the same as stock. Good replacement prop quality wise but I wouldn’t get them just for the less noise factor.

Do not buy this, the Carbon Fiber creates an interference in witch you will loose all video transmission.

I purchased these props for my DJI Mavic Air from Best Buy ( purchased my drone there too) thinking this would be an upgrade for the drone! After installing them, the drone kept loosing signal, and uncontrollable. The drone crashed a few times: (thankfully no damage). It didn’t dawn on me that the props caused the problem since I thought that Best Buy would check the products it sells to its customers! Wrong!! After checking U Tube, others had the same problem that used these props. Reinstalled the original props and problem solved! Unfortunately today was the last day that I could return the props and without a Best Buy near me, I am stuck with them!

DO NOT BUY THESE! The Carbon Fiber interferes with the video feed from the drone. Returned for a full refund, sticjk with DJI props

Beautiful props, but they don't work on mavic air. The metal screws spinning cause a lot of interference. Range drops to basically nothing. Would not use them out of concern for safety.

Don't buy these. It blocks the drone signal. I could go 10ft without losing signal

These blades cause video signal interference with Mavic Air. Put originals back on and no issues at all. Read on dji many issues of signal lost with these blades.

I love my Mavic Air but I don't like all of the noise made by the propellers that come with the unit. These propellers are made with better quality, they look better, and best of all they make a lot less noise than the original propellers.

These are worthless and dangerous. The metal used on the props creates a magnetic field that interferes with camera and instrumentation. Do not buy.

They did not test these before putting them in stores they will not let u fly your drone they are interfering with raduo signals

These cause image transmission signal interference! Don’t buy these!! Causes some sort of magnetic interference that they neglect to tell you! You will not be able to fly your drone with the image on your device! These are pieces of crap!!

The blades do not work as advertise. No noise reduction, heavier than stock and the drone has a harder time flying. I would not trust this in high winds.