Customer Ratings & Reviews

This is my first experience with a Casetify phone case and I certainly hope that I never drop my iPhone 17 Pro Max to ascertain if the drop protection of 6.6 feet (as advertised by the manufacture) actually works! Protecting my phone against accidental drops is paramount as repairs of screen breakages can easily hit hundreds of dollars. That being said, it’s nice to know that this product is rated at 3 times the MIL standard, as my mind is more at ease! I especially like the matte finish and its sure grip feeling of this case. Too many times cases are too slippery when held. An elevated bezel further protects the delicate camera lenses from surface scratches and damages. Magsafe charging and grip strength work well without loss of connectivity and a good magnetic hold is a certainty. My black color CASETiFY case is a winner! It offers decent drop protection, is nonslip and feels great in my hand. I’m definitely enjoying this case and wholeheartedly recommending it Purchase one and be happy,

Got a 17 pro max? you going to need someway to protect your new toy. This is a great option with some shortcomings. But all in all, it is worth the money. Here is my opinion on this item Good: Fits nice and tight Perfect cutouts for buttons and charging Strong magsafe magnet on back Connected great to wireless charger with no issues Semi stiff, so it feels like you are holding something solid Raised camera area to keep it off the table/flat surface Inside looks to be well insulation in case the phone is dropped Buttons are not clicky, but give good response when pressed. Giving you a confirmed feeling with using them. Bad: Kinda hard to get on since it is so tight of a fit Edges around the face are slightly pointed down, which in my case started to peel off my screen protector Outside could be a little more grippy and less plastic feeling. I am sure if my hands got wet or oily it would be hard to hold. So as you can see, there are many good points and few not so goods one. However, I am sure this will last and hold up to my daily use.

When you invest in a $1,500 phone you need to protect it. I'm the guy you want to buy a used car from because I take care of and protect things that are high value. I wanted a case to protect my phone. I have tried several cases over the years before I decided to try the Casetify protector. They claim to have specs that allow for a 6.5' drop factor which is higher than most products at this price level. I'm a bit fussy when it comes to phone cases. I don't like the slippery or fancy cases as those can make you drop your phone if you don't have a good grip. I like a "grippy" feel. It has to have the right amount of grippiness - not too much and not too little. The Casetify grip fits that feel that I'm looking for. I can also use a magnetic cell phone ring holder on this case. It allows for the magnetic ring to sit firmly on the phone through this case. The button presses are also very good. The color of the case matches my phone. The packaging of the case is excellent. It looks and feels like a quality product that can match the look and feel of my phone. It comes in several colors. I recommend this product to anyone looking for a case to protect their investment in a phone.

So, you got the new iPhone 17 Pro Max? You’re looking for a case to protect your new investment? Then Casetify has you covered (pun intended). In all seriousness, this is a really great phone case. Whereas some other brands will claim their cases protect, only to be dropped once and the case cracks/splits, leaving you in need of a new case again. You put the case on, and you’re good to go! What I really like about this case is that there’s no friction when placing it in my pocket. Some of my past phone cases had a rubberized shell that hindered me from pulling out my phone smoothly. There’s nothing more frustrating than trying to quickly pull out your phone for a photo op, only to have the phone fumble and fall to the ground. The Casetify case definitely feels like it will withstand many upon many accidental drops in your phone’s lifespan. There are no screen protectors included with this case, if you’re wondering. What you get is a durable protective case that will absorb falls. Whether you’re riding your bike and the phone slips out of your pocket, or skateboarding and bail hard onto the pavement, or have butterfingers and drop your phone anywhere, this case will protect it.

This is a great looking case by Casetify that also offers a good balance of protection while still feeling slim in the hand and pocket. The case is a matt black and hard plastic on the back. There is a very thick rectangle protrusion around the camera cutout to keep the camera protected from drops. I believe this is also to help with the rigidity of the much larger camera bump on the iPhone 17 Pro Max. The edges of the case is a hard rubber that offers shock absorption. I was almost fooled into thinking the corners were plastic as it’s a very hard rubber with a smooth texture, but to get a 6.6ft drop rating, it makes sense to have something to absorb the kinetic energy of a drop. The outside design carries into the inside, with the back being hard plastic but the sides and corners being the same rubber material. Buttons are protected too but each have slits cut out on either side to allow the case to flex for button presses. I’m not sure how I feel about this because it lets lint and dirt find it’s way into these over time. There’s a bit of stippling on the plastic on the outside that adds a small amount of grippiness to the case. I think it could be a bit more aggressive as it’s more grippy than a completely matt case, but still fairly slick. I do like the brushed look of where the magsafe magnets are. I found the magnets to be acceptable with a reasonably good amount of grip. I also like how the ports and speakers on the bottom are individually cut out instead of being a long oval. As far as case profile, no issues taking this in and out of my “phone pocket” that is on the side of my carpenter jeans. I’d call this a regular sized case. A great balance of protection and thinness. I wouldn’t be surprised if someone with tighter jeans may struggle with the sharp design around the camera bump, but no issues from me. When the phone is in the case, the case hugs just around the bezel of the phone, adding protection for the screen. This is probably also my biggest gripe. I like a case that is easily removable so I can wipe down my phone and use it without a case. I’m probably a small minority of people that do this, but I found myself putting more pressure than what I was comfortable with pushing the phone out of the case. I don’t think it’s a flaw in the design, so I wouldn’t dock a star, but just something to be aware of. While I’m complaining, I’d love to see the “Casetify” around the camera cutout to just be black and not filled in white. I’d say this is a solid case if you’re looking for a balance of size and protection. While I had a few gripes that were more personal preferences, I don’t think it takes away from the protection or usability the case offers.

I've been a BIG fan of CASETiFY's products for years. They've always been well-made, sturdy and stylish products with a flair for the artistic or dramatic in their design language, but they were always seen as kind of a childish/teenage brand, with colorful or branded/themed designs meant to make a phone stand out. What was always there also, was a sturdy design standard, and pretty reliable cases for the sometimes larger investment in such products. As a 40-something man who isn't that into fashion, I always had to go another way with the other brands that offered rugged, toughened cases in simple aesthetics that were understated yet made the statement that this phone was for serious work and could survive lots of things. I didnt even know CASETiFY made such a product with their signature protective band around the camera bump, excellent magnets and texture... Man that texture! that prevents scratches, fingerprints, AND holds up so well while being the perfect amount of grippy! The case is a perfect fit with nice snug installation for the iPhone 17 Pro Max I just upgraded to. It fits snug and hugs the screen surround to protect that Aluminum Apple reverted to in this years top-spec flagship phone... Titanium didnt need such protections, but I'm glad I have that thick firm edge border on this now soft metal chassis. The fit is great, it looks great and still professional on the phone, and I cant wait to put some miles on this one as I use the phone in outdoor settings and where rugged cases are recommended.

This is a very secure phone case for the Iphone 17 Pro Max. This case comes mag-safe so it works with alot of devices that use the mag-safe. I made the mistake of purchasing another case when the Iphone 17 came out which wasn't mag-safe and it would constantly have my phone fall off the charging posts. I have one in my car and when I hit bumps the phone kept falling off. With this case it holds the phone very well. When you take the case out of the packaging right away you can tell this is well built case. The grips on the side work great as I have dropped my phone with other cases. It states on the packaging that you can drop this phone from 6 feet but I really think you could drop this from higher heights which I am not recommending but that is how well built this case is. The one last thing I really like about this phone is with the Iphone 17 pro max the camera lens on the back are raised. This case has the raised edge to extend past the camera to protect it. I really enjoy this case and the appearance of it.

I a quite the phone case snob, and am very picky when it comes to my phone case. So this case, to me, is just another thin plastic phone case that is nothing special and does not stand out compared to all of the other plain plastic phone cases. If all you are looking for is something to keep the back and sides of your new phone scratch free and protect it from drops, I suppose this fits the bill. Also, the magnets work well for wireless charging. Here's my take on what I look for in a phone case and where this one doesn't measure up: Grip and Feel - For me, the grip and feel of a case is everything. I like a phone case that has slightly curved sides that are textured. The material should be slightly softer on the sides, like TPU, to assist with grip rather than the standard hard plastic. A case should not have any hard edges or corners that dig into my hand while I'm holding my phone. This Casetify case fails on both accounts. The claim is that is has an enhanced grip. While the sides are textured, the material is all hard plastic which still slips around. The case is also has hard edges with something like a ridge or seam on the left side rear edge. This will absolutely annoy me if I'm holding my phone for a long period. Other issues - the side buttons are not completely covered, allowing in more lint and dust. The inside of the case doesn't have any soft microfiber like material to protect the back of the phone in the case. What I assume are the wrist strap holes are up at the top, which is a horrible place for to put a wrist strap. I could keep going, but in summary, I'm not a fan of this case and wouldn't recommend it for anyone who is looking for a higher quality case.

If you want military grade protection for your iPhone 17 Pro Max, it's hard to think of any other case that would come as close as this Casetify iPhone 17 Pro Max Force Case. The box claims it's rated for drops from 6.6' and I have to believe them as this case feels solid (but I'm not prepared to drop it with my iPhone in it to test! haha). That said, I did do a couple of drop tests (without my phone) and the case is a lot less fagile than cheaper cases. In terms of fit, there's only just enough flex around the edges to lock this onto your iPhone 17 Pro Max. Once installed, all of your buttons are still easily accessible, but I will say the Force case has one of the best cut outs for the camera control I have ever used on any case, just smooth and no sharp edges. The Force case has excellent grip but even better it has proper 360 protection - including raised edges around the camera lenses. The Force Case is Magsafe compatible, both magsafe charging and grips. I'm using it with the Casetify Snappy Grip.

CASETiFY - Apple iPhone 17 Pro Max Force Case Is a solid case. Packaging was sufficient for shippping and protection of the case. The case fits snugly on the iphone 17 Pro Max. it does make it feel more secure in my hands without slippage or sliding out of my hands, thanks to the textured sides. Consists of durable materials and the black gives a very elegant look to the case. The magsafe case charges in my car’s wireless charging space as well as my home wireless chargers without fail. Highly recommend to anyone who is needing a rugged case to keep up with their active lifestyles. The black in particular in my opinion, gives a classy look and not a cheap looking nor plasticy feel. A kickstand would have been nice, but this case didn’t come with one and I didn’t expect it to. The camera knockout fits securely around the camera lens and protects the edges from chipping or rubbing off as some have reported with their iphones. I would highly recommend this case to anyone needing a sturdy, durable, nice looking case for their phones.

Having a couple of cases already for previous iPhones in the max size (having the iPhone 15 pro max and casetify mirror case for it), they feel the same but of course this is for my 17 Pro max; which roughly came in the same week (by the weekend being from AT&T being a month wait almost from first week of October) I got this case delivered. I tried it and it’s low profile and slim almost, great access to buttons and so on as similar to my previous case as I’ve mentioned. This however is all black pretty much with a stealthy glossy (not shiny or anything) type of surface. So far, they don’t have their cases for the precise correction for the camera layout as it’s just a simple rounded rectangle area (versus a covered rectangle area with hole cutouts for the 3 camera lens and the mic / light on the opposite side), so I may have to look into a 3 eye camera lens protector anyway. I haven’t really dropped my new 17 pro max yet (knock on wood) but with this case it gives more peace of mind. The MagSafe charging is solid and works and overall this is the case to get for you or even as a stocking stuffer gift as we’re one month away from the holidays at the time I’m writing this review.

This case was middle of the road. I liked the fact that it was eco friendly but that came with a price. First off it’s awfully heavy. They say that it’s built to withstand drops from over 6 feet, and while I didn’t test that out I don’t know if I’d trust it. It was very rigid and didn’t seem like it had what it took to protect the phone and to me it seemed like any shock damage would transfer right through it. The feel of the case was decent but it did add considerable bulk and heft to an already big phone with the size of the iPhone max pro. One other thing I noticed is that when charging wirelessly the back heated up considerably and that gave me concern if I needed to charge if for longer periods of time. Over all I don’t know if I would likely use this case long term. In a pinch it’s nice to have if I need one as an alternative to running my phone “naked” but overall I think if I had a choice I would probably go with a different brand or style, one that didn’t feel so big on top of the size of the phone and something that made me feel like it was going to absorb shock and not just transfer it to the phone itself.

Time of the year to try out oodles of cases for my new iPhone. Have tried out a few, like this one, but still on the search for the daily driver. This case is pretty basic in terms of looks/features. There aren't any fancy windows or specialized buttons on here. It's just a case. The case is hard plastic and a bit slick to the touch. Magsafe ring on the back. The buttons are covered to a certain extent however there are parts of the buttons beneath that are still exposed to the elements/debris/etc. There is no camera button cover on this case. Instead, it's just the normal camera cutout for the button beneath. A bit disappointing to be honest considering most other case manufacturers have some sort of cover for this button. AND considering the price of this case, you'd expect this little extra to be added into the case somehow. Overall, decent case but again, very basic. For the price of this case, I either would've expected Magsafe ring, covered camera plateau, increased shock absorption or something. As is, this just really looks like an overpriced case you'd find in a clearance bin somewhere.

Extremely durable case! I’ve dropped it multiple times and you can’t tell!

I wanted a good case for my iPhone and this was a good one