Customer Ratings & Reviews

couldn't be happier with my choice. This case has exceeded all my expectations, and it deserves every bit of its five-star rating. First and foremost, the design of this case is stunning. The sleek and minimalist black exterior gives it a premium look that will complement any gaming setup or workstation. The smoked tempered glass side panel not only adds to its aesthetics but also allows you to showcase your components with pride. But it's not all about looks; the 4000D AIRFLOW delivers where it counts. The airflow in this case is exceptional, thanks to its optimized cooling design. With the pre-installed cooling fans and the ample space for additional fans or liquid cooling solutions, my components stay frosty even during intense gaming sessions or demanding workloads. It's a true airflow champion! The cable management system is a dream come true for cable organization enthusiasts like me. The generous cable routing options, tie-downs, and channels at the back of the motherboard tray make it easy to achieve a clean and clutter-free interior. It not only improves aesthetics but also contributes to better airflow. Building inside this case was a breeze. It's spacious, and the tool-free drive installation and removable dust filters simplify the assembly process. Plus, the magnetic front panel and easily removable side panels make maintenance a piece of cake. I appreciate the attention to detail Corsair has put into this case. The I/O panel is conveniently located at the front, featuring USB 3.0 ports, a USB-C port, and audio jacks. It's always great to have easy access to these ports. In conclusion, the CORSAIR 4000D AIRFLOW ATX MidTower Case in Black is a top-notch choice for anyone looking for a case that combines style, functionality, and excellent cooling performance. It's a pleasure to build in, a treat for cable management enthusiasts, and a real head-turner in terms of design. I couldn't be happier with my purchase, and I wholeheartedly recommend it to anyone in need of a new case. Five stars well-deserved!

Of all the PC cases out there, this has the classiest design; No bling unless you go out of your way and get RGB fans, RAM and/or an RGB AIO water cooler. Some find that a distraction and this case avoids it. Aside from that, this is a very sturdy case with great airflow. I especially like the easy to clean dust filter behind the front grill which is where the majority of people put intake fans (have an iCUE H150i ELITE CAPELLIX Liquid CPU Cooler in front - RGB turned off of course). Plenty of room for good cable management, and easy to keep clean. I'm working on another build and plan on buying this case again. I don't see this design going out of style any time in the near future.

The CORSAIR 4000D AIRFLOW ATX MidTower Case in Black is a standout choice for PC enthusiasts seeking top-notch performance and sleek aesthetics. I recently acquired this case, and I am thoroughly impressed by its exceptional features and overall build quality. First and foremost, the airflow design of this case is outstanding. The innovative front panel features a high airflow mesh design, allowing for optimal cooling performance to keep components running smoothly, even under heavy loads. The inclusion of two CORSAIR AirGuide fans ensures efficient airflow throughout the case, contributing to cooler temperatures and improved system stability. The design of the 4000D AIRFLOW case is both functional and stylish. The minimalist exterior design with clean lines and a black finish exudes elegance, making it a perfect fit for any modern setup. The tempered glass side panel showcases the internal components, allowing for easy customization and a sleek, professional look. Inside the case, the spacious interior provides ample room for high-end components and efficient cable management. The tool-free drive bays and versatile storage options make installation a breeze, while the removable dust filters help keep the system clean and dust-free. Additionally, the CORSAIR RapidRoute cable management system simplifies cable routing, ensuring a clean and clutter-free interior for improved airflow and aesthetics. The case also features convenient front panel connectivity, including USB 3.0 and USB-C ports, making it easy to connect peripherals and external devices. Overall, the CORSAIR 4000D AIRFLOW ATX MidTower Case in Black exceeds expectations with its exceptional airflow, versatile design, and premium build quality. Whether you're a gaming enthusiast, content creator, or PC builder, this case offers the perfect combination of performance and style. I highly recommend it to anyone looking for a high-quality midtower case for their next PC build.

Nothing but good to say about this case. Aesthetically it's very nice and build wise it's amazing. It has dark tinted glass so you can barely see in when everything's off but once the LEDs inside light up it looks amazing without blinding you with bright lights. It has great cable management and amazing cooling. The whole front is metal and pops on and off really easily, no cheap plastic clips that break. The front dust filter is magnetic and very easy to remove and clean, the top dust filter has a nice pull tab to take it off and the bottom dust filter for the Power Supply simply slides in and out of place for cleaning. The GPU slots are inset to the case to make more room for cables so they don't stick so far out the back of the case and each individual GPU slot it's attached by screw instead of break off tabs. The case is pretty roomy inside. Overall this case was very easy to build in and I recommend this case to anyone looking for a quality built case with good airflow and compatibility

An amazing case for the price. The build quality is not superb but it's pretty good for a sub-$100 case. The airflow design is awesome, I get case temperatures of 30-40*C even when gaming which is great! The wire management in the back is well done. I LOVE the tinted glass panel - yes it is darkly tinted. So if you have no RGB or lighted components inside your case, you WILL NOT be able to see them. I loved the tinted panel because I have a ton of RGB inside, and it takes away the right glare of the RGB and leaves only the beautiful colors. It's also the perfect size for me, not too small but not too big. Pros: -Good airflow -Good build quality -Dark tinted glass panel Cons: -only 1 USB and 1 USB type C port on the top -front radiator cutout is not expandable, may have trouble fitting 360mm radiator w/ fans if you put the tubes at the bottom. My 280mm with tubes at the bottom fits but I had to squeeze the tubes into the opening. -not a big deal but the PSU can only be placed from inside-out. This is annoying because its hard to squeeze the PSU into the space when you have all the wires bunched up behind it. Most other cases design it so you place the PSU from the outside-in. Not a big deal since you won't be moving your PSU a lot but it made the install more cramped

The easiest case Ive ever built with, hands down. Super roomy while looking classy and fantastic. Airflow is amazing, adding a few more fans keeps everything cool and practically silent. I have to really hit the CPU and GPU hard to hear anything from it. Would rate higher if I could.

Nice case and tons of Airflow for $79, comes with 2 120mm black fans so I'll advise on picking up some nice 120mm rgb fan or regular fans for maximum Airflow, tons of space to work on it and have great cable management

My favorite case I've used so far. I upgraded from fractal design meshify c cause lack of space for upgrades(my fault for not thinking long term) and because the bad front filter design. This case the front comes off easy as does the filter. The cable management is amazing. I choose to use a 280mm aio on top. Firstly you have to use low profile ram which they do state in the manual. Secondly you may have to trim the corner of the left fan to clear the mobo back panel shroud( asus b550-f). I kinda already knew that going into the build while I choose what cooler I wanted to use based on others reviews. Other than that I love the case and I'd highly recommend anyone. Fits my 3070 nicely and my friend was able to fit his 3090 and 360 front aio in the same case. The air flow is great I choose to use 2 140mm front fans plus the 2 140mm for the top aio.

Simple, spacious, sleek. My old case was too small for my gpu (XFX 7800 XT length: 326mm) and looked to upgrade. Now there is plenty of room for all of the components. Not too big nor too small, perfect size! Unfortunately the tinted glass panel came cracked, but Corsair customer support was able to get me a free replacement. So for now my pc is opened on the side, which I don’t really mind. Overall, 10/10 I would recommend.

Picked this case up when it was on sale. Coming from a CoolerMaster MasterBox Q300L, this one is a world of difference. This case, as the name suggests, has great airflow. My fans don't spin up nearly as hard as they used to and my temps stay nice and cool. Also comes with some additional cable management velcro straps which I thought was a nice touch. Very easy to build in and has filtered intakes which is a huge plus. Looks amazing with RGB fans! Overall a great case, good job Corsair.

Great case for the price, very spacious front to back. Has enough fans mounts and great amount of airflow for my use case. All metal case with support for a 360 rad in the front and up to a 280mm rad in the top. Can up to 6 120mm fans with space to run cables. Have no complaint so far. 10/10 case

Built two PC’s with case. They were both my first builds. Needless to say, the case is great for first time builders. Tons of Room, easy cable management, and an impressive amount of airflow to keep those temps down. The dust filters on the front, top and bottom are a game changer for me. You won’t need to go into your gaming rig as often for dust maintenance. The best feature of all is you will have easy access to the back of your motherboard WITHOUT having to remove it. Great feature if you plan on upgrading your cpu cooler and need to change the back plate in the future. Good stuff. Highly recommended.

I purchased this case to replace my Cooler Master K500 for my AMD susytem upgrade. The dimensions are roughly the same but this Corsair has it beat by a mile. The airflow with this case is excellent as is the build quality. My only complaint is the finish scratches and scuffs very easily, so be aware when installing components. The front mesh does a decent job of catching dust but needs to be cleaned regurlarly. The gpu mounting options are nice but the vertical option, I feel, wasn't thought through due to the fact that it places the GPU almost directly against the tempered glass panel. The cable management is pretty good with the cable routing tracks and provided velcro loops although, depending on what components you install, you may find the space behind the motherboard tray to be lacking, i.e...I have PSU extensions and Lian Li Strimer cables with controllers as well as a Corsair Lighting Node Pro and Hub and the back panel bows a little. Radiator mounting options are decent as well. I currently have a 240mm in the top, but could install a 360mm in the front with no issues. Plenty of clearance for large air coolers (Noctua NH-D15s) All in all an excellent case for beginners to enthusiasts. Would definitely build in again.

Vey good case for its price and the fans included are very good lots of space and easy to cable manage. Also has a very nice magnetic front dust cover that’s easy to clean.

The case I originally ordered from amazon came damaged. I looked to around at the area Best Buys and found it for the same price. I did store pick up and the case was intact. The case itself has great airflow and decent cable management. It only comes with two fans but i already had extras so that was not a problem. This is a great case to build in!

I've now built in the 4000d airflow 3 times personally and another for a good friend. Airflow is great, enough room to house most components as well as custom loop cooling solutions. While it only comes with two 3pin case fans, its a great case for starters or budget builds. Plenty of cpu cooling space for large air coolers or 360/280 rads. At its price point, especially while on sale, its a great bang for buck case. It provides great airflow, doesn't have a huge footprint, and looks like an absolute unit of a case cosmetically. I added in Noctua fans and it quickly became a wind tunnel, keeping my 5900x/6950xt cool with tons of airflow. You don't need an overly expensive case for performance. The 4000d is my go to, and I often recommend it to friends or people online looking for a banger.

For the price this is hands down the BEST airflow pc case and also esthetically pleasing, so easy to build in and cable management is a non issue. ***** All the negative reviews in regards to the front mesh hitting the fan blades.... Hey guys, don’t over tighten your fan screws when installing because you’ll bend the thin metal and offset the front panel, then your fans may snag the mesh. Be patient people it’s a great case and to me has no cons.

I really enjoy building in this case.. -good cable management -quality magnetic dust filters -USB-c port on front -good airflow and thermals fully assembled -good airflow=lower fan speeds=whisper quite;) -space for bulky gpu -< $100 I used this case for 2 builds and would absolutely recommend and use again

One of the best cases I've owned for airflow! I had a cooler master lite box with an acrylic front panel, and my GPU temps (2070S) would shoot up to the low 80's under full load, peaked at 85c. The only way I could offset those temps were to take off the front panel, but that meant no filtration. So in the end I needed a new case, not too expensive but designed with airflow as the main priority. Caught this on a small sale and don't regret it one bit. My GPU never goes above 72-73 under full load (with fans adjusted of course). Easy to build in and corsair even provides extra materials for cable management. Update: There is a PSU shroud cover available for this case, but you must submit a ticket through corsairs website and request one for free.

Great case with really good cable management in the back with high quality straps and and big cable channel with tie down points and cable openings all around the case. Nice airflow design in the front with big filter. Really nice, premium feeling case for the money.