Customer Ratings & Reviews

This PC case was a great investment. I had to mod my first two cases to fit my components . This one had plenty of room to mount all of my 140mm fans and 120mm fans, my 4090rtx, and my top mounted 420mm aoi with a push pull configuration (all 140mm fans as well) with plenty of clearance. Has great airflow as well. Keeps my GPU and CPU well cooled. Rarely hit 60 °C for my 7950x3d and the 4090 rtx runs around 50-55°c. This is at 4k ultra settings no fps cap for most games. Runs around 140 fps on graphics heavy games. Very pleased with the purchase! No more case upgrade for me!

This case is awesome! It is big and plenty of room to put whatever you can stuff inside. It is very easy to work in and the cable management really helps. I am currently running this monster with 11 x 120mm fans and 1 x 140mm(rear exhaust). This case has a ton of USB ports on top so you will need to make sure your mother board can accommodate to USB 3.0 headers. What I stuffed in this gorgeous case: EVGA Platinum 1200 watt P2 SuperNova PSU MSI X570 MEG ACE AMD 3900XT 3.8 12 core EVGA GeForce RTX 3090 32GB G.Skill DDR4 RAM 2 x 1 TB Samsung SSD 980 Pro's 11 x 120mm Lian Li SL fans 1 x 140mm Corsair fan (came with the case)

This case is really good! I love how much space I have for all of my components and whatever water cooling system tickles my fancy. I only deduct 1 star because the value isn't as good as the 4000D or 5000D. Additionally, I would've preferred more fans included with the case.

The Corsair 7000d is wonderful! The interior is very roomy for all of your hardware and other items. It even has more space once you remove some of the panels and cabinet pieces that hides your wiring and more so if you are not planning to use the hard disk section. It is a big and sturdy case! There is still plenty of room for more even after all your parts are in place. I swapped my motherboard and other parts over from a much smaller case and the interior still has so much more space for other things. The case is quite large and heavy due to the solid steel and single glass panel construction. I removed all the included fans that it came with and replaced them with four 120mm Noctua Redux fans and seven 140mm Noctua Redux fans. The Noctua NH-D15 heat sink that I have been using on the Intel i9-12900k CPU comes with two additional 140mm fans making it thirteen Noctua fans in total. Some how this setup has reduced my XFX Radeon 6900 XT Limited Black Edition GPU temperatures from 70-80 degrees Celsius to 50-55 degrees Celsius running Apex Legends as a baseline test for two hours of gameplay! On top of all that, I purchased the case while it was on sale. The savings alone paid for a set of the Noctua fans. The Corsair 7000d was well worth the purchase and I don’t know why I did not buy it a few years back when I had built the whole system in the first place. I am now so very satisfied!

This case is big enough to fit a 3090TI founders edition. and still have room. With the 140mm Air-guide fans in the front drawing in cool air and any other kinds of fans excessing air out, the case stays cool. Very well designed case from Corsair. I do wish they would provide a way for all usb ports on the case to be daisy-chained together in one cable that connects to the motherboard, so you can utilize all available usb ports while most boards only have one usb 3.0+ connector. Excuse the reflection of my chair, the tempered glass is really good with reflection.

It is completely toolless, very easy to build in, clean lines, hinged sides, magnetic filters, removable top fan rack and takes 140 and 120mm fans with no problem. It's heavy but I didn't find a single flimsy part in it. Lift with your knees. Only complaint is the same model with RGB fans pre-installed is cheaper than buying corsair fans and controller separately.

Used in my i9 13900K/RTX 4090 Build. I top installed a Arctic Liquid Freezer II 420mm in a Push/Pull configuration. Left enough clearance for my MSI Unity Motherboard. Plenty of space and cooling for the 4090. Get it when it’s on sale.

Tons of room for fans, XL GPU, and air flow is amazing with the right fans

The CORSAIR case is Finely Crafted and Flawless. The case is well made like a tank and heavy to prove it. —No more flimsy, thin gauge sheet metal and poorly constructed cases for me. It has space for over a dozen fans, immense liquid-cooling radiators, Attention-grabbing and vast. Install three RGB LED fans on the front to make it look even better. This titanic case will last many years and make your new Computer look Great. It is worth the extra cost, and you will not regret purchasing it. Best Regards...

It has room for everything now and for the future! The airflow is amazing and the side panals make it super easy to clean. The case also looks great!

You will find this case well constructed with excellent airflow. I have three course air cases in this line from the 5000 to the 1000. I’ve gotten rid of other cases that I’ve purchased due to issues with airflow. This case looks good is very functional. The airflow is excellent.

Awesome design, first pc build, everything went well.

Amazing case definitely came in clutch for the build I had in mind

The first one i received the reset button didn't work and 2 of the 4 rubber feet were falling off. The second one i received the optional curved air diverter with 4 removable tabs was broken.

I liked how it had space for 12 fans and a rtx 3060

Worried about build in a case this big but TBH it came out looking vary good & would recommend this case to anyone building a gaming pc

Case is excellent, with adequate airflow. Sturdy construction and well engineered. Running local ai, case is well suited to deal with heat and enought room to add a 2nd gpu if needed. Cable management is excellent and well thought out. Ordered on amazon and the delivery date was pused back 3 times in the span of a month. Cancled the order and picked it up from Best Buy instead. Only took them 3 days to deliver.

I really love this case and its features. It has fantastic cable management system, tons of airflow with removable dust filters to help keep the dust out. My only complaint is that the 3 included Corsair 140mm fans are extremely noisy. The included fans are also non-RGB, but that's stated in the fine print. Upgrading the fans was a must for the reduced fan noise and to add RGB.

The build quality of the case is pretty good overall. I bought this case to because I needed it to fit an “EATX” motherboard. My first small issue is I found that the rubber windows that’s inserted into the cable management cutouts is very flimsy so I ended up removing them. The glass panel is nice and dark so it conceals wires well for a clean look. There’s not much for cable management in the back of the case and I also removed the inner door that is supposed to conceal the wires but it makes it difficult to close the door fully. There’s good room for space within the case itself so it makes it very easy to build in. There’s good airflow as well hence the name of the case and has dust covers everywhere that you would need them to be at. Overall I’d say it a pretty good start for a full size case but check out other full towers as well and really pay attention to all the small details because they all matter.

This case has a ton of space for a new PC build. I’ve had no problems with airflow in the case and my temps are at good levels even in high graphics budget games. I do have some issues with the case so far; namely the back panel. If you are intending to use a significant number of additional storage media for your build including ssd’s, the wiring can quickly get very crowded behind the MOBO and near the power supply. This can cause issues while trying to close the back panel if you have too many wires sticking out. Additionally, this can lead to issues with the nubs that hold the panel closed as that bar is attached with a double-sided sticky strip which under enough load will pull off the back panel. Otherwise this is a great case for a full-size build and looks very clean!