Customer Ratings & Reviews

If you buy the matching rgb ram, it really comes all together. Love the fans, the iCUE by corsair is so easy to use.

Keeps cpu and gpu very cool bad is that you need a lot of space to run wires but this had so much space clean runs and cable management was easy

Nice case! My last build was an ITX so it was nice to have so much room inside. I used an ITX board and a single fan GPU so there was lots of room. The only tight area was the PSU tunnel at the bottom. I ended up removing the drive bays at the bottom to make room for the PSU cables. Also, the fans are included along with the RGB controller but they each need to plug into their own power. Because of that I'm only spinning 2 of the 3 fans although they are all lit. Oh and the front removable grill was slightly bent out of the box but I was able to bend it straight and now it's all good. Solid build quality and I think it looks good too.

The fans on the front work and look great. The motherboard, cooler, etc. fit inside perfectly and with all the extra screws and zip ties it comes with I was able to cable manage nicely.

This case is cheap, comes with 3 RGB fans, and has great thermals. Currently it’s holding a B550 ATX mobo, a Corsair h100i water cooler, a RTX 3070, and a Corsair 850 PSU.

Good case and rgb is a added touch works great with the aio liquid cooler I brought and is keeping my cpu running cool and you don’t hear the fan cpu running 40c under load

I bought this case on a bit of a whim with no research, making a last-second decision to build a new PC rather than just upgrade my old one. I don't regret it at all. The mesh front, 3 included fans, removable dust filters in front, on top, and even on the bottom below the PSU make for a great value as far as airflow goes. The top of the case doesn't leave much room for radiators, so they'll either have to go in front (up to 360mm) or in the back (for a single 120mm) if you plan on water cooling. The PSU shroud with removable drive bays and rubber grommets in the motherboard tray (and PSU shroud!) make cable management somewhat manageable. There isn't much room behind the tray, especially if you're using a non-modular PSU, but it's not hard to make it work. The SATA/USB powered/controlled fan hub does wonders for cable management (especially if you subscribe to the "just shove them somewhere out of sight" school of thought, as I do). The front IO has 2 USB 3 ports and a single combined 3.5mm mic/out rather than separate in and out, a power button, and reset button. The rear of the case doesn't support vertical mounting of GPUs, so keep that in mind if you're planning on showing off your build. The front panel pops off with ease, making it super simple to clean out the dust filter, and the magnetic filter on top is almost too easy to remove, but I'm not complaining. The tempered glass panel is attached with 4 thumbscrews with felt backing. I never felt like I was going to crack the glass by over-tightening, and the 1" bezel on the back of the glass is great if you plan on running RGB strips inside without having to see the christmas light effect. The feet on the case are only about 1/2" tall, which might affect airflow if you're mounting your PSU fan-down, so I wouldn't advise putting this down on carpet (not that you should anyway, that's just asking for dust). If you're not planning on water cooling, this is a solid ATX/Micro ATX case.

Very satisfied with this case. Great air flow, ability to cable manage, plenty of room. Very well designed case- recommend 10/10

had no problem setting things up the fans were a plus MY specs Amd Ryzen 5 3500 ASUS TUF Gaming GeForce RTX™ 3060 V2 OC Edition 12GB 4x8 32gb 3200MHz 2x 500gb 970 evo plus 1x 1tb 870 evo CORSAIR Hydro Series 120mm Radiator CPU Liquid Cooling ASUS TUF GAMING X570-PLUS (WI-FI) CORSAIR CX-M Series CX650M

I love this case its build quality is excellent. The rgb case fans look great with a very nice amount of airflow.

The case is wonderful. Running an i9-9900K with a Corsair 360mm AIO keeps it at 57-60 degrees Celsius in Star Citizen. I don't use 3.5" HDD so I got rid of the enclosure so the 360mm would fit. This was perfect for my needs, the space is a little snug as the back displays my cable management (Could be better, or forever improved, but fine for my needs).

It’s a great case and has covered all my needs just wish it had more room for cable management but still a good case overall

Airflow is very nice and the 3 fans included don’t produce a insane amount of noise. The only downside I had was cable management. The bottom part of the case had very little room for even my modular power supply but removing the trays made extra space. If you’re gonna use hard drives you shouldn’t use this case unless u have amazing cable management.

So the case itself isn’t ridiculously big or hard to navigate around, but in my opinion the cables were a bit hard to stuff in and close the back panel. This was my first pc build so maybe it’s just lack of experience on my end. The fans are awesome and really easy to work with. I removed them and put them at the top and back of the case so I could fit a 280 mm water cooler at the front of it. You can’t really go wrong here.

Solid case for the most part. Only issues I had were with the width of the case. I tried to use the rgb Corsair vengeance ram but the case didn’t give me enough clearance to mount my radiator on top. I had to switch my ram out for low profile. I’m using an evga 3070ti ftw3 and it is very close to the glass side panel so my power cables are bunched up on the glass a little bit. Other than that it is a great looking case and gets pretty good airflow.

I got al my parts from Best Buy. Everything fit perfect in this case.

This is my first build and I was intrigued by the included fans and seemingly good airflow design. I was not let down by this as I have only added one more matching rgb fan to the rear as an exhaust and this case stays nice and cool under the hardest conditions I will ever use this thing under. Glass is clear and thick, no issues with assembly or wire routing.

I like everything about this case except that I can only fit one of the fans for my radiator. Mainly because I bought RGB RAM that puts a squeeze on the ability to mount the second fan (see photos). I like the magnetic dust covers on the top and bottom. It was easy to run all the cords inside as well.

Great mid tower case. Solid airflow and easy to build in.

The case is nice and compact and allows for good air flow. I used This for my first build ever and it went good just one warning if your using a full size atx board be careful with you ram sticks. when putting in my radiator at the Top of the case the ram sticks did not let it fit with the fans I had to do some modding to get everything to work.