Customer Ratings & Reviews

Looks great and build quality it’s decent. It fits a 240 rad in front. With a 3060ti FE.

Well plan on small graphics cards and micro atx motherboards. Nothing big. A 3080 or anything like that size nope wont fit and would definalty overheat.

Bought for my matx build just the right size and 3 fans included. Bes value for your money.

Worth every penny! All 3 rgb fan lights are already pre-installed ! Yes a bit pricy but to me it was all worth it for my first pc build!

The case comes with three fans with alone those are $70+ dollars USD. Case is a amazing piece of work.

Fairly good case. It’s a bit smaller than I expected but my 360 AIO fit finger in it.

One of the best towers I've had, and it comes with 3 fans and corsaurs led bridge

The first thing to say about this case is the fans are LOUD. Super disappointed in the SP120 RGB fans. While they look great, they are DC only fans and have a minimum speed for 1200 rpm, so they are LOUD. They only go from LOUD to SUPER LOUD and with motherboard fan controls these days wanting to always crank the fans when the CPU temp is high, which happens as soon as you put load on them, this case will be very loud. I replaced all my fans with LL120 PWM fans which you can spin down to 300 rpm or so, but that kinda defeats the purpose of this case and the cost is now way higher than the iCUE 465X case. So in reality you are probably better off getting that case over this one as it comes with the LL120 fans already installed, unless you are fine with a super noisy case. And while you are at it get a Commander Pro to control the fans so you can avoid the nasty noise spikes when you open up Chrome! The second thing to say about this case is that while the marketing material for this case say it can take up a 280mm cooler up front, that's not entirely correct. The cut outs for the fans in the front are for 120mm fans, so while the mounting holes would allow for 140mm fans, as you can see from the included photo they don't really fit. It would also make the RGB aesthetics of the case really bad. Unlike the iCUE 465X case, at least they are hidden by the front panel somewhat so it would not too bad, but it would not be ideal. Also the fan blades would be hidden behind the cut outs. I am not sure why Corsair just made the rails without the cut outs to make it better for fitting both 120mm and 140mm fans. Also for those interested, it does fit a 240mm cooler up front just fine even though it does not say that. That's how I set it up in my case with a 240mm cooler covering the top two fans and the last fan just blowing on the hard drive case. Finally I was worried about room for a GPU with a cooler up front, but it actually fits fine as you can see with my 2080Ti from my gaming rig mocked up in one of the photos.

Very nice case. Came with fan, and rgb hub. A little tight but gets the job done. Looks amazing as well.

Looks like nice a case it is a thigh fit for the components though that could make room for some improvements like power connection still using cheep pin cabling for power and reset power LED this is my first build for lintel board and gaming board i would recommend to friend or family member for the case the lighting is for effects and really not need its for vanity more than function i do new builds every 6 years i am not a gamer

Overall good case, Case airflow is very good and my i5-9600k sits around 30-40C and my GPU idles at about 35-45C

Awesome case I was able to fit my 360mm Corsair radiator in the front it was a little challenge but it possible. I’m writing this review because I haven’t seen Anybody with 360mm in the front

I Love it so much.The Best case i cant buy i live The fans

Perfect size not to big not to small and great looking RGB fans.

Pretty nice case for money with RGB lights and controller.

This case is fantastic. Arrived in perfect condition, looks incredible. Only thing I would say is you NEED to plan out exactly how big every component you’re going to put in it is. I barely fit my evga gpu and a h100i on the front. Psu was a squeeze with all the cables hooked up but it was an 850w RMX so maybe go a little smaller on the psu.

First off I did fit everything I needed to fit, but there is a detail you may need to know. I got this case for a ground up build with the exception of storage from my old build. The only major issue I ran into was using a HDD. It does have a mounting brakets for 2 HDs 2 and 2 ssds. I was transferring 2 ssds and 1 hdd to this machine. The problem, I was also planning on using a 360mm liquid cooler for my cpu. You cannot use the HDD bracket and the 360mm cooler as they occupy the same space. I will eventually phase that out, but with all the other components I purchased (and the "for now" gpu I purchased that I'll want to upgrade when the are easier to get), I didn't want to buy another drive just now. I ended up using 2 sided mounting tape to secure the drive down inside the case, close to the power supply. Other than that I everything else went well, the wiring is super easy to conceal and the case has good air flow. The looks are also good. If you have a small area to work with, this would probably be good for you. I wouldn't buy it again, but didn't feel the need to return it.

I love this case!!!! I purchased this case because my previous case was a full tower and it weighed 40 pounds and was a pain to clean. The Corsair icue 220t doesn’t weigh near as much and is extremely easy to clean. It also has dust screens that block most of the dust so the case doesn’t need to be cleaned as often

Solid case for a gaming build. I wanted a case with a relatively small footprint that could still fit an ATX motherboard and this fit the bill nicely. In order to fit the radiator up top, you must use low profile ram. Side bonus was an all Corsair build with the requisite RGB.

Packing was in perfect condition, everything was there in the case. Case was in perfect condition and works perfect. The size is perfect and I can even put an AIO cooler inside with a full ATX motherboard.