Customer Ratings & Reviews

I purchased this dual monitor mount to sit atop a traditional desk (as opposed to clamp-on rigs that attach to cubicles). It came with all the hardware and tools needed to assemble and adjust the system. It has ample reach to carry two 27 inch monitors, with room to adjust the viewing angle and tilt of each individual monitor. It's a bit stiff right out of the box and requires adjustment of the individual joints to allow easy movement and alignment. Note that height of of the bar is adjustable, but uses a friction clamp and is a bit of a challenge once weighed down with monitors. It definitely wants to go down, but really resists being raised, so height adjustment might require a second person, or removing and replacing the monitors. Fortunately, this type of adjustment isn't common and usually only needs to be done during installation. Unfortunately, the unit tilts a bit to the left (when viewed from the front) and there doesn't appear to be any way to adjust the vertical pole or arms to compensate for that tilt. As a result, I used carpenters door wedges to lift the left leg of the base and roll the entire unit to the right until level. Do be sure to keep the monitors within the reach of the base to avoid tipping forward if they are bumped. The base has absolutely no counter weight of its own and isn't clamped like a cubicle base would be. For the intended purpose, it is an inexpensive mounting system that is strong and capable and has a reasonable price.

I replaced my old duel monitors and wanted to get a replacement stand as well. I had one of those really big hp dual screen stands that took up pretty much all of your desk space. This one is great!! It has wire management built in and you can adjust it to pretty much any angle that suits you. I have a lot more space now and I also think it looks great!! I mean you don’t even really see the stand.

The build quality is great very sturdy an fantastic for two small or medium sized monitors.

The mount is sturdy and does its job well. Careful when mounting the monitors, as the mount will tilt to one side and possibly topple over with a heavy enough monitor mounted on one side.

This item provides a solid and rigid support up to 27” dual monitors. It is simple to put together. A must buy.

Good build quality worked with my 2 LG 4k monitors

Excellent and easy to set-up space saving monitor stand. Need two monitors for work and this helped removed the clutter from my desk.

We installed 2 Vizio 24in TVs on our desk at the office. It is a great item for the price.

Unfortunately my new dell monitor did not work with it but I liked the quality

The unit is nothing special but does the job. Not enough adjustments available to ensure the monitors are 100% aligned. The back brackets has a bit too much play. But... it does the job for the price I paid

Sturdy mount that I plan to purchase again throughout our office. Offers cable management brackets that can be added to the cylinder and arms of the stand. The documentation doesn't offer much, but this stand isn't difficult to put up.

It holds up my screens and i can adjust them how i want so how can i complain

It looks like a sad Ace Frehley. But that's OK. Once you put monitors on it, it goes away.

Good product with ease of use. Would recommend it for gammers

Nice! Easy to install! The only thing is that it’s hard to adjust the screens

Reading reviews of this type of stand, it seemed like stability is usually an issue with larger monitors. I have 27" and 24" Ultrasharp monitors that I needed to mount and was a little concerned, but this thing handles them very well. The base plate is solid metal and about 18" wide and 12" deep. Yeah, the monitors would tip the thing forward if you try to extend the arms forward, but if you keep in mind where you're placing the center of gravity, you'll be fine. Keep the monitors over the center of the stand. I'd docking it one star because even with everything tightened, the place where the Vesa mounts connect to the arm has about an inch of horizontal wobble. There's no concern of it breaking or falling off, the mounts are just connected to a vertical adjustment screw which allows the pivot. Took me about 20 minutes to mount both monitors. It has two clips on each arm and one on the main stand for cable management.