Customer Ratings & Reviews

If you have or expect to have multiple Hoover ONEPWR products, this is the tool for you. The charger is compatible with them all. It’s a two-bay charging unit to help ensure you always have a charged battery for continuous run time. Because the ONEPWR batteries are so easy to change out, it only takes a few moments. Charging time is comparably quick! The charger itself is small in size and can be wall-mounted, if you wish. Each bay has LED indicator lights to show charging status. Be aware, however, that the bays charge sequentially, not at the same time. With several ONEPWR devices, this could be very helpful. With one device, maybe not so much; because if it has two batteries, you only use one at the time, while the other is in the charger. Either way, Hoover’s ONEPWR concept is such a great idea, compared to brands whose individual products have a different charger for each product. Too many chargers to keep up with sometimes! Thank you Hoover.

This dual charger is good in that you can put two batteries on the charger at once. I first thought the bad part was that the batteries charge sequentially so both are not charging at the same time. This is not a big problem, though, since the second battery starts charging automatically when the other is done. You still end up with two charged batteries when you need them which beats having to remember to always keep one in the charger. The wall mounting feature Is great since the batteries are kept off the floor where you can grab one when needed then you just drop the battery back into the charger when you are finished with it and it starts charging again. Also the recharge time is not bad either which is supposed to be 3 times faster than the charger that comes with the ONEPWR vacuum which is less than 3 hours.

Hoover is going the route similar to power tools, in which they want you to be able to leverage batteries across their suite of tools. If you are invested in Hoovers OnePwr tool set, then you may find this accessory not really worth it as each tool should come with a charger and so you can at least have more flexibility of rotating your batteries. On the other hand, say you have the OnePwr blade vacuum, which comes with two batteries. I don't want to think about rotating batteries after use. Which means that if I had a single charger which now has a new battery charged up but the battery on the vacuum is dead, well I better hope I was not planning on a big job of vacuuming, cleaning the couch, dusting ext, because I probably will not have a full charge when the full battery finally dies out. Therefore having this dual charger is a good piece of mind, and you don't have to think about swapping out batteries on the charger. I did notice something odd about the charger however. Not sure if it was because one of my batteries were completely drained or if the charger actually only charges one battery at a time. When you place the battery in on the charger, the battery will has a battery indicator that will flash while charging. What I found was that only one battery was flashing. Later in the day, I saw the other battery flashing but not the first one. So it kind of made me believe that it only charges one battery at a time. Which is ok to me because if you are done with your job and you just let it charge over night. However, if you need to get batteries up and running more quickly at the same time, perhaps using the original chargers for each battery would make sense. The need for this really depends on what you plan on doing with Hoover's tool set and how much the convenience is worth to you.

Your Hoover OnePwr stick vac comes with two batteries but only one charger - this changer will charge faster and charge both batteries. Yeah, it has slots for two batteries, but will only do one at a time (for that I docked it one star), but charges faster than the charger included with the stick vac. I just drop both into this charger when I am done for the day and both are ready to go when I need them. Comes with screws to mount to the wall - a definite must-have for any OnePwr device!

It does exactly as billed. It charges the battery for the Hoover ONEPWR Blade+ fairly quickly. It has space for two batteries.However, the problem is that it charges sequentially. I thought the unit was broken when I first got it, seeing only one side charge. I was quick to flip the batteries around to see if the other side charge, which it did. There are no manuals with the unit (not that you really need one), so thankfully the packaging cleared up the issue - it says right on the package that it charges SEQUENTIALLY. This means it only charges one battery at a time. It will only charge the second battery after the first is full. This defeats the purpose of a multiple battery charging unit. Keep in mind that the Hoover ONEPWR Blade+ already comes with a battery charging stand (with space for just one battery, though), so you are essentially replicating the functionality of the ONEPWR battery charger pack by simply buying a second battery. This product costs $50 and does not include a second battery. A brand new battery costs $50 (second hand will run you $35-40) and you will be able to charge it sequentially by yourself, just like this unit does. Very dubious design if you ask me. Every other battery charger I've bought for multiple batteries has charged the batteries in PARALLEL, which is how you'd expect such a device to work.

This charger is absolutely fantastic once you figure out that it only sequentially charges 2 batteries and doesn't charge both at the same time. This confused me at first as I thought maybe the unit was broken, but that's exactly how the unit is mean to operate, so FYI. Pros: Wall mountable. Holds and charges 2 ONEPWR batteries. Cons: Sequential battery charging is mentioned on the packaging, but nowhere in the manual. Doesn't toast bread.

I've got 3 batteries between 2 vacumes (shop and the handheld one). They both have their own charger so it's not necessary to get this, but what I do find good about this is that I am able to mount it to the wall and have one spot that I am always charging the batteries. I don't think its a needed addon on, but it can be worth it if you have multiple vacuums and don't want to keep multiple separate chargers.

If you own any of the Hoover ONEPWR products, this is an easy recommendation. This is also the perfect item to pair with the Hoover ONEPWR vacuum that already comes with two 3.0 Ah lithium batteries. There is only one major drawback, in my opinion, that prevented it from getting a perfect 5 stars. This unit will NOT charge both batteries at the same time. At first, I was a bit confused as to why I was only seeing the charging indicator LEDs light up one side of the charger. I also noticed only one of the battery's indicator LEDs were lighting up as well . After using it for a few days I can confirm that the 2nd battery will not charge until the first one has completely charged first. I'm not sure if this is due to a power limitation on this charge pack or if it was designed this way by Hoover as a safety precaution. In either case, I think that most consumers will be under the impression that both batteries will charge at the same time, as I did, and would have liked to have seen more transparency from Hoover on this limitation. Other than that, it has worked flawlessly. I've noticed that it will take about 4 hours for a full charge. While the charging time could have obviously been cut in half if both batteries could charge at the same time, all in all this is a great and convenient product that allows you to simply slap in two batteries and walk away to tend to other things around the house.

I really like this charger because I have two Hoover ONEPWR devices with 3 batteries total. I have the Hoover battery operated Floormate and I also have the stick vacuum. The dual battery charger allows me to charge both batteries on the same dock, even though they are different size batteries. It is nicely mountable and the power cable can tuck in and is compact. Very nice accessory for a wonderful suite of products!

It charges the batteries just like it should. You get a free charger with many of your devices so this is really only needed if you have extra batteries (which I do suggest for the Onepwr devices). Here are two things you should know about it. First, it only charges one battery at a time even though it is a dual charger. You can put both batteries in the dock and know that when you wake up the batteries will be charged, but in reality it starts charging the first one you plug in. Then when that one is charged, it stops charging the full battery and starts charging the second one. This is important for timing in that if you put two batteries into the charge and each battery takes 4 hours to charge you will need to wait 8 hours for both of them. Don't think you'll get them both powered up in 4 hours. To do that you'll need two separate single battery chargers. I still like this because it saves space and only uses one outlet, but if you need to quickly charge multiple batteries, you need to understand this may not be for you. It is nice that it stops charging a battery once its full, but also watch out because the documentation is wrong. It says that when the battery is full it will be a solid light for 15 sec. On mine it just stays one. Not a big deal, but if your light is off, the battery may not be charging at all. Check the button on the battery itself before trusting that no light means the battery is full. Overall a good charger if you have multiple batteries.

This is nice charger, you can charge two batteries at the same time, and it has indicators to let us know the charging status of the battery. If you have multiple Hoover cord less products this will surely help. No issues with the product, it works I will recommend if you have multiple hoover products.

Hmmm. What does one say about a battery charger that works as advertised. It works!! This does exactly what the name says, charges ONEPWR batteries. This unit charges one battery at a time and then maintains two batteries ready for use. Pull one off for use when you swap them out so one is charging all the time. This is a must have if you have items that use the ONEPWR battery.

Having a cordless vac is always nice, but being able to keep battery packs always charged and ready, is often an issue for me. Having multiple batteries is great, but this dual charger is a must have. Makes my Onepwr as good as a corded vac maybe even better. I find the charging is quick and controlled which should help the long term battery life.

We have the ONEPWR lithium ion battery charger which with the hoover ONEPWR Blade+ is a must. The overall look of the charger is less than appealing, its big and bulky. It is not something that you want to have out as part of your decor. We have it in a closet out of the way. I would have rathered a stackable thin unit that takes up less pace. The unit itself does its job, It charges fast and lets you charge both batteries at the same time to have them ready with a full charge. It allows one to swap out the batteries during your vacuum sessions. We just keep both batteries on the charger at all times. The unit is not too heavy but the batteries themselves are very big and bulky. Which may be the reason as to the size of the charge bay.

This is a good add-on to the Hoover ONEPWR Blade+ Cordless Stick Vacuum since it can charge two batteries at the same time. I like that it has a light that shows the charging status so you don't have to guess how much it has charged up. Like the vacuum itself it can be wall mounted which is great since they can both be tucked out of the way.

There’s not much to say about the Hoover battery charger. It’s much more convenient than the single charger they supply you with when you buy a vacuum. Being able to hang it and have both batteries being able to charge is extremely helpful. Works great! Would recommend if you have a Hoover vacuum with the batteries

The dual battery charger is great and a must if you own a Hoover device that requires changing out the battery frequently. Batteries are fully charged in just over an hour and having the dual charger ensures that there is a spare when the battery in the device that is being used dies.

Overall this is a solidly built charger, it's nice to be able to plug two batteries in and have them charge. The only thing that was a little confusing at first was the fact that it only charges one battery at a time so whichever battery you plug in first is the one that is going to charge first. If I had any real complaints it would be that the indicator LED for when a battery is plugged in is kind of dim, so it can be hard to see at a glance depending on the angle your looking at the charger, but otherwise, this charger is great and allows you to keep two batteries ready to go for the vacuum or whatever other stuff you have that uses the same battery pack.

Nicely designed two bay charger for Hoover ONEPWR lithium ion batteries. 21V 1.5 Amp. Why not use USB PD? Charges one at a time and holds two. Medium sized transformer at the plug.

For years now I’ve just charged my batteries with having to lean my vacuum against the wall while it charged however this makes it so easy to charge and be conveniently on the wall, it even comes with anchors to hang in drywall. Awesome !