Customer Ratings & Reviews

The assembly was easy to follow, and it had all of the supplies needed to easily mount on the wall concrete or just use the stand. I use the stand and was able to assemble it in less than 15 minutes.

I must say, however came up with this idea, must get a raise! This solution is great for anyone that maybe got a used TV that didn't come with feet or cannot make holes on the wall to mount it using conventional wall mounts. Came in a small box, however heavy, this gave me an indication of how good the materials must be. And indeed, all the parts are metal and sturdy. It came with all the needed parts to fix it to my TV. At first, I though I would just replace the standard feet of my TV, but upon reading more into it, found out it actually mounts to your TV using the standard VESA wall mount holes in the back. This is a genius solution, since those are a standard, as long as your TV has the one this use (there are many spacing variations, so check first) it should fit. On my case, I need to get my TV as high as I could because of neck problems, that is the best viewing angle. But to make matters worst, I did not want to make holes on my wall. Enter this solution. Installing it was easy and they provide several bolts and screw sizes and also spacers... why? Well some TV's back are curved, others flat, and others have their inputs (hdmi ports etc) really close to the feet back metal parts, so if that's the case, those will give you the proper spacing. My TV's back was flat and there was not problem with the ports. I installed them and you can tune the heigh, it goes very high and was perfect for my viewing situation. I did worried a bit about how high it was, thinking it could maybe topple over or something like that, but the base of the feet are plenty wide to prevent that, plus they include soft adhesive pads you can stick to the top of the feet base to provide a soft surface to place a sound bar on top without scratching it! Definitely a great solution if your TV is missing feet or you cannot wall mount it or don't want to!

It is stunning how strong and versatile this kit is. The little box where it came was heavy. The kit once assembled is sturdy with a nice black matte finish, which makes me feel very confident on having my 55” Samsung or Toshiba TV mounted without worrying it wont hold it and break. The design is nice and the black matte will work with any black color TV. Screws and junctions are carefully aligned to make it look good. The assembly is super easy and straight forward. It almost feels like building a Lego kit, with some fan included. And all I needed was a Phillips screwdriver. The instructions are clear and easy to follow. It has the enough number of holes to go as high as 11.5in from ground to TV’s lower edge, or as low as 3.5in, based on my 55in TV. The Base legs are heavy and strong enough as well as the right length to maintain the balance, however the kit also includes anti-tip safety straps to attach either to the wall or table. A cool thing I just found out, since I can adjust the height, is that I can place my Soundbar on the legs making it look the whole assembly like same brand. The word “Universal” is a perfect word choice for this kit, because it comes with all the screws, washers, spacers, clips, for, I will dare to say, any TV brand you might have. I tried it for my Samsung and Toshiba, and they use different Screws, and this kit includes them all. My Toshiba came with some kind of plastic arachnid leg design that I never liked. I could never feel fully confident that it would support or maintain balance for this TV, since it is kind of heavy. But with this Insignia kit, not only did it improve the safety, but the overall look of my TV. The price is very affordable, for the quality and design. I am very pleased not only with the safeness and reliability of this kit, but also with the improvement of the overall look of my TV.

The Insignia Universal TV Feet Replacement kit is designed to allow you to raise a TV up higher than the traditional TV stand will permit. Most factory TV stands place the TV so low that it becomes difficult to place a soundbar in front of the TV without blocking the bottom edge of the screen, or worse, the remote sensor! The Insignia kit permits you to raise the TV up higher (as much as 8.67") by utilizing the wall mount attachment points on the back of your TV instead of the factory stand. Several years ago, I mounted a TV on the wall and when I did, I tossed the factory stand. When I decided to upgrade the wall-mounted TV, I no longer had a stand for the original unit. With this kit, the problem was solved! The base is sturdy and although it extends forward of the TV, I was actually able to raise the TV high enough to place my soundbar on top of the bracket (see photos). Assembly was simple using the provided instructions and hardware, and all of the parts fit well together. The stand is sturdy and does a great job of supporting the TV. They even included an anti-tip kit should you need to anchor the TV to the wall to prevent it from tipping over. Included in the kit are the two base pieces, and 6 uprights (3 per side). Depending on the height you're looking for, you may only need 4 (2 per side). The uprights have nuts already securely fastened to the bracket making it simple to attach the mounting bolts. The holes are even beveled to countersink the bolt heads (although I wish more of the holes were beveled which would allow a little more flexibility when adjusting the height). They included plenty of extra bolts/spacers to accommodate multiple attachment options. The kit also includes a cable management system to organize your cords and cables. Once again, another great product from Insignia!

For a tv stand, I was surprised at how heavy the box was. When opening it, I saw how many things that came with it making surprised and realizing why the box was so heavy. They really do give you every nut, bolts, screws and spacers for any type of application anyone needs. The stand itself is also very heavy and solid giving me confidence that it will last over time. I can see that this stand could hold televisions 4 times heavier than the stated weight capacity. Like most people, I think (lol), when I replaced my wall mounted tv for something bigger, I just didn't want to throw away a still good working television. So I decided to put it in the garage where I have a gym. And, of course, for the life of me, I couldn't find the stand that came with the television. Now most those that come with the tv is made of plastic and probably matches the tv, but this stand is all steel and heavy duty. And for my needs, it being in the garage where anything could happen, this stand is perfect. Installation is super straight forward. I didn't follow the instructions and went with putting the feet together first and then aligning to what fit the back of my television. Luckily I didn't need the spacers, which btw, they give you different sizes for different applications. This is a quality stand for a great price.

This Universal TV feet replacement kit is easy to assemble and attach to most TVs. Assembling the TV feet only took me about 7 minutes, and the only tool required (not included) is a regular Phillips screwdriver. The supporting leg is long enough to prevent the TV from tipping over. For added safety, the kit includes anti-tip safety straps that attach to the top of each leg, securing it to a table or wall. The legs and the bracket are made of thick metal and are well-painted. The only challenge is attaching the feet to the back of the TV. Depending on the TV's back, you will need to choose the best size screw and spacers (if the back is obstructed or irregularly-shaped). The kits come with 8 different sizes/threads of screws to attach the feet to the back of the TV. If the screw is too long, it will damage the TV. If the screw is too short, the TV could potentially fall from the mount. The complete assembly and attachment took me about 30 minutes to complete. The TV is very stable and secure. Overall, I am satisfied with this product; it is well designed, has heavy-duty metal legs, and is well-painted.

I have a TV stand that I got from Best Buy and my 65" Hisense TV sits on it. I also have a large soundbar. The problem was, with the factory feet on the TV, my soundbar didn't fit on the TV stand very well. Even with the standard TV feet all the way to the rear of the TV stand, they stuck out too far for my soundbar to sit flat on the TV stand. The factory feet also come down at and angle. I got these universal TV feet replacements to see if it would help with my setup. Installation is easy, although I made it much harder on myself by installing them with the TV still on the stand. If you lay your TV flat (like the instructions tell you to) installation would be a breeze. I just have so much stuff connected to the TV (Fire Stick, light strip, PS5, soundbar, etc) that I didn't feel like unplugging everything and laying the TV on the floor. I just assembled the feet and placed the factory TV feet up on shoe boxes to raise it enough to mount the universal TV feet to the TV and then removed the factory feet and shoe boxes and set it down on the universal feet. These feet mount to the wall mount bracket holes on the TV. They come with a lot of mounting hardware to accommodate various TVs. The hardware includes different length and diameter screws as well as different width washers. The hardest part is figuring out exactly how high you want to have the TV sitting. I knew I wanted enough space for my soundbar to sit across the feet. I initially went too high and had to lower them. It's still a little higher than I would like, but I can always adjust it later. The biggest advantage of these feet, besides the height adjustment, for me is that the feet are flat and don't come down at an angle like my factory TV feet did. Having my soundbar actually sit flat like it is supposed to is great. Even if something like this isn't an issue for you, being able to adjust the height is a great option. You can get a lot of height without the hassle of wall mounting the TV. Overall, I highly recommend these TV feet.

Look, we all know why products like this exist. You mounted your TV once and figured you’d never need the stand again, so you tossed it. Fast forward a few years and now you’re moving that TV to a spare bedroom, or you bought a new one that’s just a little bigger, and guess what—no stand. That’s where this Insignia kit came in for me. In these situations, you're looking for two things: decent price and easy setup. I’d give this kit a solid 4.5 stars on both. It's not the cheapest out there, and not the easiest I’ve ever assembled, but it's close enough it both areas that I’m happy with it. What stood out was how well-labeled everything was. The instructions were clear, and the packaging—while maybe too protective with all that wrapping—made sure nothing was scratched or dinged. One small gripe: Parts B and C had to be screwed together when they easily could’ve been one longer piece. It felt like an extra step for no reason. Assembly-wise, all you really need is a Phillips screwdriver. I appreciated that. It came with plenty of hardware options for different TVs, though I had a bunch of extras since I was just using it on an older Roku TV. Once installed, the TV sat rock solid—no wobble, no tilt. I did end up adjusting the height, which meant pulling out the bolts and trying a different set of holes, but even that wasn’t too bad. All said and done, I’d give this kit a 9 out of 10. Rounded up to 5 stars for Best Buy’s system. It’s cheap enough for a midrange or even nicer TV, looks decent, and works like it should. Now if I could just find the remote for that old TV...

The feet arrive in a small package that is very heavy for its size. The powder coated metal is very heavy and sturdy so it should hold up. Everything came labeled and packaged nicely to prevent scratching. The enclosed directions are great and have verbiage and pictures. Most directions lately seem to be just pictorial and you are left trying to guess. Hardware is included if the back of your TV is flat or curved. We have a flat back so it is slightly easier to install. Installation took me about 15 minutes to read the instructions (yes-read the instructions!), assemble the feet and install. The enclosed pictures show the TV sitting on a coffee table as the area where it will end up is under construction. Very easy assembly and the feet easily attached to the back of the TV. We had to use the “A” extensions or the holes wouldn’t have lined up. You may not need them (or want them). These feet are highly recommended. Most TV’s now come with feet that are too wide. These will fit on our stand nicely.

I have been looking for a tv mount for a while now and thank goodness this insignia mount came to my rescue. I have had my dinosaur tank of a plasma TV for about 20 years now. Yes... Plasma... I still have it. But it works and it gets rotated around the house as a spare TV. Because it is plasma this thing weights A LOT. So finding a stand to support this beast of a TV is really hard. And I lost the original base stand mount that it came with many years ago so Insignia to the rescue. Setup was super simple. It came with all the brackets and bolts to attached to my VESA mount. It took all but 15 mins max to get this done. After mounting I stood the TV up and rocked it around and it was stable. Even with all the plasma weight. Look is clean. The feet are the only noticeable features that stick out. It comes with cord management material so that was good. Clean black looks is good and typically matches most TVs these days. If you lost your old base mount and need to find a replacement for heavy larger TVs look no further. Insignia has you covered.

The first thing you see when you play it home. It looks just like it does in the store. The picture is fantastic just like it is in the store. I always thought the stores played some ultra high resolution show on the samples, i can verify that its not true.

It was a God-send! I made a mistake measuring my tv cabinet. When I tried to set up my new tv, the factory tv legs were worthless. However, Best Buy came through for me, with adjustable tv legs! They’re are made of metal (not plastic like most tv companies give you), are very sturdy, and simple to install! A+++ rating for this product!

The feet were originally too wide for our TV console, so we had to rearrange our whole living room. This product completely saved us, allowing us to restore it to its original state and preventing us from having to buy a new TV console. very sturdy and secure. Love that it's adjustable and has a sleek design!

easy to assemble and the look and fit for my 50 inch LG is great.

A great solution. The LG TV we purchased was made to hang on the wall only (came with wall bracket but nothing so it could stand in n a countertop). These "feet" were the perfect option.

Inexpensive and solid. This fit my 55” class TV perfectly. Assembly and attachment was not difficult. The TV sits solidly on the cabinet with this stand. I am about to buy another.

Easy to assemble. Perfect fit durable, sturdy. Nicely constructed.

These are awesome. Super sturdy. Adjustable height so I am able to raise it ABOVE my sound bar! With the little feet that comes with it, they interfered with the sound bar.

I have a fireplace stand that was only 38" wide, the tv i purchased was 51" foot to foot. So this was perfect.

Very surprising how well constructed the stand was and easy to put together