Customer Ratings & Reviews

Perfect low cost case and looks very nice, held everything i needed it to

This case is awesome! So much extra space! Just go get one.

I was looking to upgrade the case for my rig for a few months and couldn't decide which one to use. Aftwr upgrading my desk setup i went with this case for its simplicity, the wide open side panel to view all the components, and ease of upgrading. I must say, building in this case was EEEEAAAASSSYYYYY. This was only the second time ive built a PC and i don't know how i was able to build in the janky old case i had before. There are plenty of wire ties included, wiring that fits into the hokes easily, and the channels on the back panel jeep it all tucked away nice and neat. This is a MUST buy for anyone looking to begin building a PC.

Great case. Easy to work in and looks great. Top quality

I love this case. There’s so much room for every thing that I needed and a lot of room in the back for cable management. Customized the front with some random stickers from Amazon to make it feel more unique. Totally recommend

It's only been a couple months and this is my first pc and without really reading the dimensions it's a decent sized case, it's simplistic, clean and minimal. It dose the job at being a case. I didn't take the picture with the intention of doing a review. Im at work and I'm bored.

I just bought this case for my new Ryzen 5 2600X build. Right away I could tell that NZXT designers really thought this case design through. I found the case to be intuitive to work with. The finished build is great looking and very functional. The cable management solution is very nice with the velcro straps for the main PSU cables and tons of anchor points for zip ties for other component wires like fans, etc. All of the cable mess is behind the motherboard panel and totally out of view even if you do a poor job with cable management. The stock case fans were quiet, but I replaced them with my Corsair LL120 fans for top and rear exhaust, and two Corsair ML120 fans for intake. The tempered glass panel is beautiful and mounts with only one thumb screw. This makes access to the inside very quick and easy. Just be careful as removing the panel can be tricky, and it is glass. The wire management side attaches with two thumb screws and is also easy to work with. I did, however, replace all the thumbscrews with better anodized versions. The stock screws are plastic gripped ones and looked cheap. This case is very much worth the money over the low budget cases. I would definitely recommend it to a friend for any workstation or gaming machine within "normal" spec and moderate overclocks. If you plan to go nuts with overclocking components you may want to spend a little more for a case with more airflow or use water-cooling.

I had upgraded my tower from yesteryear model to NZXT H510. I must say that this is very convenient to access anything on the motherboard as the SSDs, HDDs and PSU(SMPS) are tucked away to the other side (in the bottom cage). Co-incidentally everything I have including, motherboard, heatsink, RAM, Graphics Cards are all Black/Red. So this case aesthetically pleasing. Without water cooling and a fairly high degree of overclocking the CPU, the temperatures are still don't go over 70 degrees, very well thought out airflow and impressively designed chassis with plenty of vents.

My Dell inspiron 3847 parts fit in this case and don't have a problem with proprietary parts- i3-4170 CPU with a corsair H60 on it,a PNY GTX 1050 2GB GPU,EVGA 600w PSU,1TB SanDisk ultra SSD boot drive,1TB Seagate 7200 rpm HDD for back up and 3-120mm thermaltake fans,1 corsair fan on the H60. My CPU Temp at idle is 31°C-Gaming Temp is 50°c-60°c. GPU Temp idle is 28°c-Gaming Temp is 55°c-60°c. SSD Temp is usualky sitting at 21°c at idle or gaming unless I use crystal disk mark to test then I will see it go up to 32 or 33°c with 555mbs reads-535mbs rites so I'm really happy with temps and cable management with this case and overall quality of the product and looks of it too.

This was my first step into the computer building world. I wanted something I could be slightly flashy with but still keep it generally simple. This definitely takes care of that. Three hdd bays, 3 ssd bays, three case fans with room for one more. Cable management decent. ***BE CAREFUL REMOVING/REINSTALLING GLASS COVER*** I’ve seen people complain about them in other reviews so I knew to be careful and had no issues whatsoever. (Hackintosh up and running)

Decent price, and decent cable management setup. There are better cases out there, but this one is definitely better than average. I have this over a month still havent taken the glass clear sticker off.

So this is a little complicated. The case looks absolutely beautiful, build came out amazingly clean. .. but .. .its not ventilated the best, i havent had any issue yet with the 10700k or the 1070ti install but they get pretty darn warm. For the price, this was pretty great (got it on sale)

Awesome case I love it small but good you definitely need a good amount of fans because the air flow isn’t to prefect but still not enough to make you worry

This is simply an awesome and clean PC case. I mod pc occasionally and my old case was due for an upgrade. After reviewing many pc cases... i settled on NZXT 510 for its mid tower size and ventilation. Even though the front is closed off, there is a vertical meshed vent on the outer side along with meshed vent below the case. Using the same micro atx mobo and components from my previous case, my internals run 3-5 degree cooler on avg. This case enables mutiple fan setup for air cooled or liquid. For me, I prefer long term reliability - thus stuck with my air cooled system. I have a rather larger CPU cooler and this case is wide enough to accommodate it. Case comes with 2 NZXT fans, but i opted to use my own RGB fans instead for cosmetic reason. Overall- this is 5 star PC case esp at the price point.

Per the usual, NZXT released a great case at an affordable price. The cable management in the back on solid panel is easy to use and I enjoyed building in this case a lot. This is my second NZXT case build and it certainly won't be my last!

Great case, very good cable management. The only negatives I found were that the thumb screw points felt a little cheap to me and the tempered glass door, when taking off or putting it back on didn't feel perfect. They felt like they weren't lining up well and had me worrying about cross threading the screws or breaking the glass door. Once everything is lined up and back together though, everything feels solid. I still have 5 stars as these issues seem to be more of a feel issue than a function issue. Also, once the computer is built, I won't need to open it up often. Overall, great product.

This case is something else. I appreciate the fact that it costs what it did because I was able to fit approximately $3000 worth of parts in it and not have an issue. You can indeed fit a 280mm rad in the front of the case and set the fans as an intake on the radiator and have good idle temps. 9700k OC at 5.0ghz in here. Idles mid to upper 30s.

I really liked the Tower it had a premium feel to it, not flimsy. Plenty of space for the other internal components. Pretty straightforward to install motherboard.

Great case. Have built in plenty of these. Easy to work in. Some may say thermally it’s a heat box but I’ve figured out that taking of the glass relieves some of that!

This case is amazing, fully opens up for an easy build, the glass is durable and looks very nice. Room for led ad ins if you wanted, and plenty of space for larger builds. Amazing price!