Customer Ratings & Reviews

These should really only be used to hold the smallest of speakers. Like the cheap Logitech rear channels for a PC. I put 8LB (max weight) speakers on them and one broke while I was setting up the other. They're made of plastic that flexes and breaks too easily.

very good for mounting small speakers!! Like the Bose speakers i needed to mount!!

The wall mounts do their job and I would say they do their job very well. My only complaint is that the locking screw that connects the wall bracket to the speaker simply tightened right through the cheap plastic. I was simply turning it with no resistance whatsoever and the screw went through the other side. I have included pictures. I am a little disappointed at the cheap quality, but since I already had the brackets on the wall and was able to make it work I decided to deal with it. I would still recommend the wall brackets with that caveat to be careful about the cheap plastic. For a higher end system though you may want to look at something more expensive.

I attached these to my Klipsch speakers and wished they had more options of screws available. Had to rig mine to work.

These mounts work really great. You can swivel them to fit in almost any spot. Then when you get the right angle you tighten the screw and it holds that position. Worked really well for my surround sound setup.

I used these mounts to attach my Dolby ATMOS height speakers to my roof. They give flexibility in aiming as well as being a secure mount for overhead speakers.

I bought this bracket for my Klipsch 5 speaker system. The bracket once installed to drywall with screw anchor is not sturdy enough to support weight each speaker. The issue is worse for the CENTER speaker as it is heavier than the front and rear speaker, I can see the center speaker cantilevering. I have to use 2 brackets for the center speaker. Well, Package comes with 5 brackets, I was short 1 bracket since I have to use 2 for the center speaker. So bought another pack of 2. Aesthetically is good, but functionally it is just okay.

Great value for my need and use case. Keep everything as you may need it for the future.

Attached to HEOS 3 speakers and put on the wall. One worked great and fit tightly. The other one not so much. Had to use washers to get tight on the back of the speaker. Not one screw in the pack fit the keyhole. I had to go purchase the correct size screw. I’m not sure I would use again?

I have Cerwin-Vega bookshelf speakers mounted on them, and they do just fine.

Perfect for any small to midsize speakers Perfect for my vizios

They work and look great. I would recommend this product to anyone who needs them.

Junk - poorly made piece of plastic that will it hold up my speakers which weigh 5.7#, even though the specifications claim they will hold speakers up to 8#. Really poor product for anything larger than probably 3#. Waste of $45. I had to add a rubber bumper to keep my speakers from damaging the drywall as this won’t support weight claimed in their specs

[Employee of bestbuy] I used the Rocketfish™ tilting wall mounts for my small speakers and was happy with how easy they were to install. The mounts feel sturdy enough for lightweight speakers and hold them securely once in place. I really liked the tilt feature because it let me angle the speakers toward my listening area, which helped improve the sound. The black finish also blends in well and gives a clean, organized look. One downside is that the mounts feel a bit plastic, so I wouldn’t trust them with heavier speakers. Overall, they’re a solid and affordable option if you’re mounting small speakers and want a simple, adjustable setup.

These are universal and just make sure NOT TO OVERTIGHTEN them, otherwise the little arm will break since they are made out of plastic.

ZERO if I could. These are cheap plastic garbage. If you have tiny speakers this Amy work, but surround sound speakers with a little size will collapse these.

Screw to attach bracket onto my rear speaker snapped off in my speaker and made one of the mounting holes completely unusable. DO NOT BUY!

Works great! I bought it for my sony HTz9f rear speakers. It comes with varieties of mounting kit for any speakers. Very easy to install and cones with all the screws and dry wall mounts. Very solid and easy adjustable to how you want it

These went up easily and look great. They were easy to adjust to fit my space. The price tag was a bit much to pay for plastic elbows but that's all they had so not much choice.

Was iffy at first when I saw these out the box they seemed a lil flimsy like they couldn't hold anything over 1lbs. But to my surprise they have been up on my wall holding a set of Sony srz5 speakers in using these speakers as a rear channel setup for my Sony HTNT5 sound bar. And I've had them handing up on my wall for about a month or so with zero issues. I did use some Molly anchors to hold them in place on my wall just for a lil extra support and also the ability to remove the screws and reuse them as needed with out any problems. Adjusting the speakers to set the imaging is simple I'd buy these again.