Rocketfish™ - Tilting Wall Mounts for Most Small Speakers (2-Pack) - Black

Easily mount 2 small speakers weighing up to 8 lbs. on your wall or ceiling with these Rocketfish™ RF-HSWM2B mounts that tilt and pivot to enable simple positioning. The weather-resistant design allows indoor and outdoor use to meet your needs.
$24.99

Item Added.View List

Add to List

    No lists found. Create one today.
    Add Item
    Cardmember Offers

    Overview

    Ratings & Reviews


    Overall Customer Rating:
    94% of customers would recommend this product to a friend (1054 out of 1133)

    Features


    Compatible with the SONOS PLAY:1 and most small speakers weighing up to 8 lbs.

    For wide-ranging use with rear surround sound systems, outdoor patio speakers, multiroom audio systems and more.

    Tilting and swiveling design

    Allows you to easily position speakers to your liking.

    Adjustable pivot

    Locks the speaker securely into a variety of positions and helps prevent slipping.

    Weather-resistant design

    Enables use indoors or outside.

    Decorative caps

    Conceal hardware for a sleek, stylish appearance.

    Adapter brackets

    Permit use with home theater satellite speakers.

    2-pack

    Enables you to mount up to 2 speakers (not included).


    Customer rating

    4.4
    94%
    would recommend to a friend

    Pros

    Cons

    • Rating: 5 out of 5 stars

      They Work Perfectly (w/ a Slight Modification)

      Posted
      bluskies

      I really can't say enough good about this kit. I used it to mount an older set of Infinity TSS-450 speakers to the ceiling in my basement. My only complaint (if you can call it that) is the arms that adjust don't go a full 90 degrees. Probably not a big deal for most folks but in my setup, mounting them from the roof meant the L and R front speakers were pointed more towards the floor than where I wanted. I solved this by taking the arms apart and using a chisel to gently shave off the point that was getting in the way. Hard to tell what I mean by the pictures but when you go to adjust them you'll see what I'm talking about. I only took off about an 1/8" and it's very easy to do, taking all of 5 minutes to do both. But this allowed more articulation and I was able to point the speakers exactly where I wanted. They've been up for about 2 weeks and everything is holding in place right where I put them. But my favorite thing about this kit is the fact that it also allowed me to mount my center speaker as well -- something I never thought was possible. As I mentioned, the TSS-450 is old... a good 15 years old and the center speaker was meant to sit on a shelf or on top of a TV that wasn't flat, so there's no 1/4" 20 thread hole on the back. But what the center speaker DOES have is an adjustable rear foot, allowing it to go up or down. So just for giggles, I unscrewed that all the way out ... and one of the screws in the mounting kit fit!! I had to use an extension to get the clearance I needed but so what. That's what they're there for, right? All in all, this is a great kit with tons of options for any scenario. I highly recommend. Also, check to see if there's an Open Box available. It's 10 bucks cheaper for the exact same thing. : )

      I would recommend this to a friend

    • Rating: 1 out of 5 stars

      Poor quality and does not work as advertised.

      Posted
      ChrisLB

      I have multiple issues with this product: 1. The speaker mounts are advertised to hold speakers up to 8 pounds. The speaker mounts are bending under the weight of my speakers that are about 6 pounds. The weight of my speakers was verified with the manufacturer and double checked on a postal scale. 2. Two of the Five mounts had the threads strip when I was using my fingers and the supplied wrench to tighten the mounting screws. This is due to the low quality plastic used in the mounts. 3. Most of the parts are of a poor quality plastic. I highly doubt that they could safely hold an 8 pound speaker if the mounts are bending under the weight of a 6 pound speaker. 4. Considering the cheap plastic used in this kit, the kit should be $30, not $50. The materials are of similar quality to the cheap speaker mount kits that sell for about $30 on other web sites. 5. After getting the first 2 speakers mounted, I had trouble aiming them where I wanted them to be pointed due to the speaker mounts flexing. 6. I'm considering returning this product. However, I now have the mounting holes drilled into my wall and will need to find other speaker mounts that will cover the holes. Unless you have very small and light speakers, I wouldn't recommend this product.

      No, I would not recommend this to a friend

    • Rating: 3 out of 5 stars

      They are OK

      Posted
      4ktv
      • Verified PurchaserVerified Purchase
      • My Best Buy® MemberMember

      I bought these because they appeared to be very well constructed and they they would be perfect. In the end they were just ok. They are getting the job done but they were not quite the right size here an there. They include several connection options to fasten to your speakers but each was slightly not right,. the arm for the mount would not mount at a 90 degree angle like I needed for my installation,. I was able to swap parts from arm to arm and get the 90 angle I needed but then I learned that the notches where not meant to be interchanged. I was able to tighten it down enough so it would not move too bad, also gravity helps in my configuration. Next issue, while trying to configure it I had to bolt it together several times. once I decided how I wanted it, as I tightened the bolt it started to feel soft. I thought the threads we metal but I think some are plastic. The plastic threads did not hold up well. Once I knew how I wanted them configured the rest of the install went well. I would recommend but with some reservations.

      I would recommend this to a friend

    • Rating: 4 out of 5 stars

      Great Wall mounts for light bookshelf speakers

      Posted
      MeMeMeMe
      • Verified PurchaserVerified Purchase
      • My Best Buy® MemberMember

      Used these to mount 2 pairs of Dayton B652 Bookshelf speakers. Mine are slightly modified, so they each weigh about about 6.5lbs. The cabinets are 7" deep with the upgraded binding posts I installed in them. These mounts can easily hold them at a 25-30° down angle. I would strictly adhere to the 8lb load capacity--even with upraded mounting hardware. I would also only stud mount these. Mounting in drywall only could be achieved with toggle bolt anchors, but I did not want to risk it as these are made of plastic and, aptly, deform when compressed or strained. The only reason I gave 4 stars instead of 5 stars is the included mounting hardware is pretty cheap and one of the aluminum screw heads stripped on the 3rd speaker I mounted. I removed turned the stripped screw with pliers and replaced the remaining anchor screws with stainless steel drywall anchors and added washers purchased from a local hardware store. The mounts themselves are great and unobrusive, but no matter what mount you purchase always budget for upgraded mounting hardware.

      I would recommend this to a friend

    • Rating: 4 out of 5 stars

      Great for the price

      Posted
      PKtheEngineer
      • Verified PurchaserVerified Purchase
      • My Best Buy® Elite MemberElite Member

      I wanted to upgrade my home theater to be an Atmos theater setup so I first investigated in-ceiling speakers but they were too much work and would cause me to have 6" holes in my ceiling. That would be a hassle if I wanted to move. Luckily, I found these and they work great. They hold my Atmos speakers (~5-7 lbs). I only have two negatives to say about them though. First, I wish they would include grommets to make the small drill hole in my ceiling look more professional. Second, the angle adjustability is not very smooth. There are only preset angles to adjust the speaker to. Think of it like only being able to set the hour hand of a clock to where the numerals are, and nowhere in- between. Other than that, I am happy with the purchase and would recommend to anyone looking for a cheap alternative to in-ceiling speakers.

      I would recommend this to a friend

    • Rating: 2 out of 5 stars

      Gets the Job Done but be WARNED!

      Posted
      Slomoe
      • Verified PurchaserVerified Purchase
      • My Best Buy® Elite MemberElite Member

      Let me stary by saying this, I would reccomend these speaker mounts. They get the job done and once your speakers are up, hopefully you don't have to adjust them much. The allan wrench adjustments are a bit inconvenient when on a ladder and trying to adjust. But the biggest setback about these mounts is that the screws they send you are TERRIBLE! Please heed my warning! I went to screw the base that goes to the speaker into my speaker and the screw they give you just broke off like butter in my speaker! Resulting in me taking my sound bar back to the nearest Best Buy that had the same sound bar which was 40 miles away by the way. All because some stupid little screw got stuck in my speaker! So frustrating. So please, be careful when screwing in you speakers. Do not use a drill when screwing into the speakers and go very slow. Overall the mounts work fine, I just had a bad experience and would like to caution others who buy this product.

      I would recommend this to a friend

    • Rating: 3 out of 5 stars

      Does the Job but cheap plastic

      Posted
      Chris
      • Verified PurchaserVerified Purchase
      • My Best Buy® Elite Plus MemberElite Plus Member

      The wall mounts do their job and I would say they do their job very well. My only complaint is that the locking screw that connects the wall bracket to the speaker simply tightened right through the cheap plastic. I was simply turning it with no resistance whatsoever and the screw went through the other side. I have included pictures. I am a little disappointed at the cheap quality, but since I already had the brackets on the wall and was able to make it work I decided to deal with it. I would still recommend the wall brackets with that caveat to be careful about the cheap plastic. For a higher end system though you may want to look at something more expensive.

      I would recommend this to a friend

    • Rating: 5 out of 5 stars

      Wouldn't mount small speakers without them

      Posted
      routerguy
      • Verified PurchaserVerified Purchase
      • My Best Buy® Elite MemberElite Member

      These little guys are AWESOME. I used them to mount Definitive Technology - ProCinema 600 5.1-Channel Home Theater Speaker System, and these worked perfectly. The feel light which made me a little suspect, but they are quite strong. There are 2 different ways to mount the speakers depending on the types of speakers, mine had both the button hole and the screw in option, and I used both. Both are very secure. this also comes with a set of extensions that can be used to set the speakers further out from the wall or further down from the ceiling. Extension adds about 3 inches.One Note, do not over tighten the screws that hold the plastic speaker parts together. They are plastic as well and you can strip them, once you feel it tightening down, stop turning it will hold fine.

      I would recommend this to a friend




    Product images, including color, may differ from actual product appearance.