Sanus - 28" to 42" Adjustable Height Speaker Stands for Satellite Speaker (2-pack) - Black

These are heavy duty well built stands. I would give 5 stars if they fit either my Samsung HWQ90R or HW-Q930C satellite speakers. Although there is a good variety of bracket configurations included with these stands, there are no included brackets that align with the threaded mounting holes on the back of these speakers. Consequently I had to fabricate working brackets from the included array of parts in the box. The other issue is that the power cord for each speaker is supposed to run up through the hollow stand poles, and out a slot cut in the pole near the top to plug into the speaker. Unfortunately the power cord plugs for the Samsung are way to large to fit in the pole or out the slot. This is not the stands fault, I simply did not do deep enough research before the purchase. I decided to keep them as I made them work for the speakers of one sound bar that is in my office and generally not under guest scrutiny. I will find another model the works correctly with the living room speakers. This would be an excellent purchase otherwise, just make sure they work with whatever brand of speaker you have.

These stands have been great for my Samsung q90r rear speakers with one minor quirk. I had to try a few different configurations. If using the square base plate to set the speaker on, the speaker’s power cord attaches to the bottom of the speaker, and having to screw in from the top of the base plate prevents the speaker from sitting flat. The power cord plug contacts the top of the screw head. I resolved this problem by placing some sound deadening foam (also called Monitor isolation pads) on the baseplate first so that the speaker could sit flush. I am very happy with the result and attached photos. The foam pads were easy to cut to match the size of the square base. I did go out and buy one extra of the longer 1/4-20 x 1.25 in. Screws and washer to assist with my configuration.

Quick delivery. I just set these up. Pretty easy assembly. Several optional parts for different speaker types, which is a huge plus. I almost bought a 'cheapie' set, but I decided to splurge and get a quality product. For the price, these are very sturdy and look great. MyCambridge Soundworks speakers, at 5lbs+, are secure and I won't have to worry about the dogs knocking them over if they bump the stand. Suggestion: It is easier to thread the wire down from the top. If you need to go in from the bottom (my wire came out from the wall) run a 2nd wire from the top down, tape it securely to your main wire and pull it carefully back up from the bottom to the top. Easy peasy. I highly recommend these stands.

Hello, and thanks for reading my review! Let’s get right in! These speaker stands are a great edition to anyone’s home theater system! I’m using Sony SRS-ZR5 rears on the stands! They work great! Balance is good! Options for mounting are very good! You have a few different ways you can attach to your speakers. Then, if your creative you can attach more then one bracket if you need to. With the Sony, I used one bracket per stand, and the results are awesome! Only thing I would change is the opening for wires! This opening in the poll is to allow the wire to be hidden, allowing a cleaner install. Sadly, the only wire you’ll be able to get through is a speaker wire, or network. The 120v outlet plug won’t fit! So, that’s a bummer. Other wise, these are ready to rock! They have two different foot options! One for a carpet, and one for hard flooring. The black wrinkle coating on the metal is great quality. Looks like every other gig stand I’ve seen. They are a bit of weight, which is good! You don’t want you speakers tipping over! So, the weight is great! Make sure you face your speaker over the stand, and not off the back or front side! This will cause your install to be very off-balance. Other wise, this is a sold unit! Good choice for home theater systems of all kinds. My photo is not outstanding, I apologize! You get my point.

Bought to hold rear speakers for my Samsung HW-Q950A soundbar. They are a solid steal or iron build and work well for what they do. However, the hole to hold the wires through the tube is too small for the connector on the speakers and was obviously designed with speaker wire in mind. Also, the weight of the speaker makes it very easy to knock over if you bump them. I think another speaker would work better with these, but they do the job well enough.