Magnetic Gps Mount

With a powerful magnetic anchor plate that mates to your radar detector and a sticky silicon suction cup for windshield attachment, the Escort EZ Mag Mount provides a reliable mounting stability along with adjustable positioning angle. This mount is compatible with the Escort Redline 360c, MAXcam 360c, MAX 360c MKII, MAX 360 MKII, MAX 4, MAX 3, and the Cobra RAD 700i.

The iTap 3 Magnetic Dash & Windshield Mount is a compact, but powerful phone holder that utilizes magnets for a seamless mounting experience. Designed for maximum convenience, the iTap 3 is MagSafe compatible while also featuring an included magnetic ring adapter that attaches to the back of any non-MagSafe phone or case for universal compatibility. Featuring ten sets of heat-resistant N52 magnets that firmly grip your phone, the iTap 3 ensures your device stays securely mounted, even on rough roads. Firmly attach the iTap 3 to both dashboards and windshields via a super strong, reusable suction cup base with sticky gel formula. The streamlined telescopic arm effortlessly extends from 4 inches to 6.75 inches and pivots on a 260* arch. An anti-slip silicone finish offers added support and a gentle, scratch-free connection. Adjust the mount to find your perfect viewing angle thanks to a rotating ball joint that tilts and pivots between landscape and portrait mode for ultimate flexibility. Enhance your driving experience with the iTap 3!

The Scosche MagicMount Pro 2 Dash/Vent 4-in-1 Mounting Kit is a powerful magnetic mounting system for conveniently mounting your Smartphone to the dashboard or vent inside your vehicle. You get 4 different mounting options inside one package: regular vent, FreeFlow vent, regular dash and Swing-Arm dash mounts. The unique design of the mount head allows iPhone 12 devices or later with a MagSafe to secure to the mount (without the need to use a MagicPlate). The removable vent clips make it easy to switch the mount holder from one vehicle to another. The unique, open design of the FreeFlow vent mount allows air to flow freely from your vehicles vent. The vent clips attach to both small and large sized louvers. It’s quick and easy to install to the front of your car dashboard with the strong, automotive grade dash base. The cradle-free design eliminates the need to tighten around your device, just hover your mobile phone device near the magnetic surface and instantly lock it securely into place. Rotate the car phone dash/vent mounts 360-degrees to adjust or swivel the swing arm mount to find your perfect viewing angle of your mobile device. NOTE: This mount is compatible with the MagSafe magnetic mounting system but does not charge the phone.

Hassle-free magnetic cell phone mount, featuring a high-bond adhesive and auto-alignment

You get what you pay for with car vent mounts, and the Peak Design Car Vent Mount is hands-down the strongest, sturdiest, most adjustable vent mount money can buy. Traditional vent mounts are wrought with frustration: they're flimsy and prone to falling off, they're difficult to position, and they completely block airflow. Built from solid machined aluminum, the PD Car Vent Mount fastens to your vent with 2 points of connection for considerably more strength and stability. A 360-degree swivel arm lets you position your phone away from your vent for better airflow and easier viewing. And to top it off, this mount uses our SlimLink mounting system—powerful magnets and a UV-shielded anti-slip pad instantly grab hold of your phone in portrait or landscape. Adjust the viewing angle with a buttery-smooth aluminum ball head. This mount is strong enough for any kind of driving, off-road included. Available in standard or wireless charging models. With the charging model, the mount's magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging and no more surprise battery outages. Compatible with many but not all car vents (see compatibility specifications). Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter.

You get what you pay for with car vent mounts, and the Peak Design Car Vent Mount is hands-down the strongest, sturdiest, most adjustable vent mount money can buy. Traditional vent mounts are wrought with frustration: they're flimsy and prone to falling off, they're difficult to position, and they completely block airflow. Built from solid machined aluminum, the PD Car Vent Mount fastens to your vent with 2 points of connection for considerably more strength and stability. A 360-degree swivel arm lets you position your phone away from your vent for better airflow and easier viewing. And to top it off, this mount uses our SlimLink mounting system—powerful magnets and a UV-shielded anti-slip pad instantly grab hold of your phone in portrait or landscape. Adjust the viewing angle with a buttery-smooth aluminum ball head. This mount is strong enough for any kind of driving, off-road included. Available in standard or wireless charging models. With the charging model, the mount's magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging and no more surprise battery outages. Compatible with many but not all car vents (see compatibility specifications). Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter.

With the Best Buy essentials Magnetic Car Vent Mount for MagSafe Compatible Devices, use your existing car charger and attach the mount to your car vent to charge your iPhone. It allows you to magnetically snap your iPhone into place and turn your device vertically or horizontally for an ideal viewing angle. Backed by Best Buy, this mount is made of PC and aluminum, granting long-lasting durability you can count on.

A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you'll feel like it was there from the start. That's because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong magnets hold your phone in place even during the most spirited driving—we call the mounting system SlimLink and it's so fast and secure, it borders on magic. Adjust viewing angle with a buttery-smooth aluminum ballhead. Car Mount's small footprint lets you mount your phone right where you want it without obstructing your view of the road. Available in standard or wireless charging models. With the charging model, the mount's magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging, and no more surprise battery outages. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter. Best results when attached to flat, hard, non-porous, non-textured surfaces.

The Velox Mini Qi2 is a versatile dash & windshield phone holder that utilizes Qi2 technology for a powerful magnetic hold and fast wireless charge. Designed exclusively for Qi2-enabled devices including MagSafe compatible iPhones and cases, the Velox Mini Qi2 delivers up to 15W of power. Just tap your phone against the mount face and powerful magnets will hold it in place in perfect alignment. Securely install the Velox Mini Qi2 on your vehicle’s dashboard or windshield via a super strong, reusable suction cup base with sticky gel formula. A dashboard pad is included to protect you dash from any potential damage. The telescopic arm easily extends from 4” to 6.75” and pivots on a 260* arc to give you ultimate flexibility when installing the mount. A ball joint rotates and tilts so you can adjust the cradle for an ideal and safe viewing position in either portrait or landscape mode. A series of ventilation holes constructed around the mount help to dissipate heat and maintain airflow, while the anti-slip silicone finish offers added support and a gentle, scratch-free connection to your phone. Now it’s easier than ever to keep your phone powered up on the go!