The Nighthawk isn't just another amp—it’s built premium from the ground up. Every detail has been carefully engineered, with countless hours spent refining its design to deliver the kind of sound that hits hard and stays sharp, no matter the conditions. Powered by a cutting-edge Class D driver and Infineon output stages, the Nighthawk brings serious performance to your setup. It’s built specifically as a bass amplifier and crushes power ratings at 40Hz—built to keep up with long rides and loud roads without missing a beat. Whether you're a weekend cruiser or drive every day, the Nighthawk is made to deliver. Professional-grade sound, rugged design, and all the power you need to fuel your ride—this is the real deal. Features DC Auto Detect Turn On Speaker Connection by High Current Plug Selectable Ohm Load Stability Stereo/Mono Switch allows single input operation. Start Stop compatible. Compatible with charging systems up to 17 Volts. Variable Speed Ball Bearing Fan Cooling Stereo Power @ 14.4V-1% THD All Channels Driven 4 Ohm = 250 Watts x 2 2 Ohm = 400 Watts x 2 1 Ohm = 400 Watts x 2 Bridged 4 Ohm = 800 Watts x 1 2 Ohm = 800 Watts x 1 Distortion Below 0.02% THD from 100mW to 200 Watts Best THD 0.005% 2 Watts to 20 Watts THD 20Hz to 20KHz (1 Watt) .009% Signal to Noise Ratio -88dB Referenced to 1 Watt (2V) -113dB Reference to Full Power (31.5V) Crossover 55Hz -500Hz 12dB Per Octave Highpass, Lowpass Full Range State variable filters Linkwitz Riley Bandwidth 10Hz to 20KHz (-1dB) 10Hz to 32KHz (-3dB) Operating Voltage 10.5VDC – 17.1VDC Low voltage warning light 11.4VDC Start Stop Voltage 4.6VDC Gain Range 150mV – 5.25V Input Type Balanced Operating Temperature -4F – 180F (-20C -- 82C) Fuses 3 x 30A Type Mini ATM Dimensions 10.35”(L) x 6”(W) x 2”(H) 260mm(L) x 152mm(W) x 51mm(H)

• Key Feature: Engineered for Real-World Performance – Built from the ground up with a rugged design and premium components, this amplifier delivers consistent, high-impact bass whether you’re cruising the highway or pushing limits off-road.
• Key Feature: High Output, Low Distortion Power – Offers up to 800 watts bridged with ultra-low distortion—below 0.02% from 100 milliwatts to 200 watts—ensuring clean, tight, and powerful low-frequency response.
• Key Feature: Advanced Class D Design with Infineon Output – Powered by cutting-edge Class D topology and Infineon output stages for exceptional efficiency, thermal stability, and sonic performance at demanding bass frequencies.
• Key Feature: Versatile System Compatibility – Features selectable ohm load stability, DC auto turn-on, stereo/mono input flexibility, and support for charging systems up to 17 volts and start-stop vehicle platforms.
• Key Feature: Reliable Thermal Management – Equipped with a variable speed, ball-bearing fan and robust 3 x 30A fusing for cool and dependable operation in extreme environments ranging from -4°F to 180°F.