Audio-Technica - AT-VM95E Dual Moving Magnet Cartridge - Green
About this product
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. FeaturesVM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusWhat's in the BoxAT-VM95E Dual Moving Magnet CartridgeTwo 11mm installation screwsTwo 8mm installation screwsTwo washersSpecificationsFrequency response: 20 - 22000HzChannel separation: 20dB at 1kHzVertical tracking force: 1.8 - 2.2g (2.0g standard)Stylus construction: Bonded round shankRecommended load impedance: 47000 ohmsOutput: 4.0mV (1kHz 5cm/sec)Channel balance: 2.0dB (1kHz)Stylus shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement stylus: AT-VMN95ECoil impedance: 3.3k ohms (1kHz)DC resistance: 485 ohmsLoad capacitance: 100 to 200pFCoil inductance: 550mH (1kHz)Vertical tracking angle: 23°Dimensions (H x W x D): 0.68" x 0.74" x 1.2"<
Premium Audio & Video Accessory
VM95 Series dual Magnet cartridge with 0.3 x 0.7 mil Elliptical stylus
ENHANCED CHANNEL SEPARATION
Enjoy a wider stereo image thanks to the 20dB channel separation at 1kHz, which provides a more distinct and immersive listening experience.
OPTIMIZED TRACKING
Achieve precise vinyl playback with a recommended vertical tracking force of 1.8-2.2g (2.0g standard), minimizing wear and maximizing stylus contact.
VERSATILE COMPATIBILITY
Easily integrates with most turntables using a standard half-inch mount and 4-Pin connection, ensuring a hassle-free setup and broad compatibility.
LONG
LASTING PERFORMANCE - Benefit from the durable bonded round shank stylus construction and easily replaceable AT-VMN95E stylus, ensuring extended use and consistent quality.
- Accessory TypeOtherModel CompatibilityUniversal
Reviews
Rating 4.7 out of 5 stars with 3 reviews
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. FeaturesVM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusWhat's in the BoxAT-VM95E Dual Moving Magnet CartridgeTwo 11mm installation screwsTwo 8mm installation screwsTwo washersSpecificationsFrequency response: 20 - 22000HzChannel separation: 20dB at 1kHzVertical tracking force: 1.8 - 2.2g (2.0g standard)Stylus construction: Bonded round shankRecommended load impedance: 47000 ohmsOutput: 4.0mV (1kHz 5cm/sec)Channel balance: 2.0dB (1kHz)Stylus shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement stylus: AT-VMN95ECoil impedance: 3.3k ohms (1kHz)DC resistance: 485 ohmsLoad capacitance: 100 to 200pFCoil inductance: 550mH (1kHz)Vertical tracking angle: 23°Dimensions (H x W x D): 0.68" x 0.74" x 1.2"<
2.2 x 0.12 mil microlinear replacement stylus for AT-VM95ML dual moving magnet cartridge.What's in the BoxAT-VMN95ML Replacement StylusSpecificationsFrequency Response: 20-25000 HzChannel Separation: 23 dB at 1 kHzVertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude square shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 3.5 mV (1 kHz 5 cm/sec.)Output Channel Balance: 1.5 dB (1 kHz)Stylus Shape: 2.2 x 0.12 mil MicrolinearCantilever: Aluminum pipeStatic Compliance: 20 x 10^-6 cm/dyneDynamic Compliance: 10 x 10^-6 cm/dyne (100 Hz)Mounting: Half-inchCartridge Weight: 6.1 gDimensions (W x H x D): 18.9 mm x 17.2 mm x 28.3 mm
Replace worn parts to get crystal clear sound with this Audio-Technica elliptical replacement stylus. The elliptical diamond design follows record grooves precisely to reduce distortion and improve response from the VM95 series. This Audio-Technica elliptical replacement stylus can be used to replace worn styluses and keep dual moving motor cartridges running flawlessly.
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.
Specs
Do the screws come with the cartridge?
Answered by AudioTechnicaYes, two 11 mm long screws, two 8 mm long screws, and two washers come with the cartridge.
Find more like this
Customers ultimately bought
Your sound, your style Sponsored
Discover related products
$82.99The price was $103.95
$47.45The price was $48.99
$24.99The price was $48.00
