Audio-Technica - Replacement Stylus for AT-VM95 Phonograph Cartridges - Green
About this product
Replace worn parts to get crystal clear sound with this Audio-Technica elliptical replacement stylus. The elliptical diamond design follows record grooves precisely to reduce distortion and improve response from the VM95 series. This Audio-Technica elliptical replacement stylus can be used to replace worn styluses and keep dual moving motor cartridges running flawlessly.
Compatible with Audio-Technica AT-VM95 dual moving magnet cartridges
For a precise fit.
Elliptical stylus shape
Designed to track record grooves with high accuracy.
Aluminum cantilever tip
Offers faithful sound reproduction.
- Accessory TypeVMN95EModel CompatibilityAT-VM95E
Reviews
Rating 4.7 out of 5 stars with 112 reviews
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
Replace worn parts to get crystal clear sound with this Audio-Technica elliptical replacement stylus. The elliptical diamond design follows record grooves precisely to reduce distortion and improve response from the VM95 series. This Audio-Technica elliptical replacement stylus can be used to replace worn styluses and keep dual moving motor cartridges running flawlessly.
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: H
2.2 x 0.12 mil microlinear replacement stylus for AT-VM95ML dual moving magnet cartridge.What's in the BoxAT-VMN95ML Replacement StylusSpecificationsFrequency Response: 20-25000 HzChannel Separation: 23 dB at 1 kHzVertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude square shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 3.5 mV (1 kHz 5 cm/sec.)Output Channel Balance: 1.5 dB (1 kHz)Stylus Shape: 2.2 x 0.12 mil MicrolinearCantilever: Aluminum pipeStatic Compliance: 20 x 10^-6 cm/dyneDynamic Compliance: 10 x 10^-6 cm/dyne (100 Hz)Mounting: Half-inchCartridge Weight: 6.1 gDimensions (W x H x D): 18.9 mm x 17.2 mm x 28.3 mm
Specs
what’s the difference between the colored needles and the white ones?
Answered by AudioTechnicaStylus construction. Within this series, the white one is a 3.0 mil bonded conical tip designed specifically for the playback of 78 RPM Shellac (SP) records. The remaining colored styli are for use with today's vinyl records. The blue is an economical 0.6 mil bonded conical tip, the green uses an 0.3 x 0.7 mil bonded elliptical tip for improved high frequency performance, the orange uses the same tip as the green but the stylus is nude, not bonded, giving the orange extended high frequency response and improved transient response.The red uses a nude micro linear shape tip on a square shank.The micro linear shape has a more narrow side radius and a longer vertical contact ridge. The micro linear tip is our longest wearing tip and it traces the groove with a high degree of accuracy and low noise. The brown uses a Shibata tip on a square shank. The Shibata profile is similar to the micro linear tip but it has a distinct, more focused sound with some mid-bass warmth. If your system sounds too bright, the Shibata tip can help tone it down. Nude styli will have improved transient response and detail compared to a bonded styli of the same shape and size. A square shank is more expensive to manufacture than the traditional round shank, but it allows for more precise indexing of the cantilever thanks to a corresponding laser cut square hole in the cantilever.
Can I replace an AT11E (See photo) with this stylus?
Answered by AudioTechnicaNo you cannot, the AT-VMN95E Replacement Stylus is not compatible with your cartridge. The AT11E Cartridge, and its ATS11E stylus, have been discontinued for quite some time. We have no stock remaining of any replacement styli from that family, and nothing that is currently available that is compatible with that cartridge body. Time for a new cartridge, like the AT-VM95E Cartridge which includes the AT-VMN95E Stylus.
Will this fit a Technics SL-1700 MK2. Thanks for the help
Answered by AudioTechnicaNo, it will not, not JUST the replacement stylus anyway. You need the entire cartridge complete with stylus, the AT-VM95E Cartridge. https://www.audio-technica.com/cms/cartridges/af5bd3ae747e0165/index.html
Will this fit a Teac TN 300 turntable?
Answered by AudioTechnicaAccording to your turntables documentation, our AT95E Cartridge was supplied with it. Please confirm this. If it is the AT95E Cartridge, the only replacement styli available for your cartridge is the ATN95E or the ATN95EX Replacement Stylus. PLEASE NOTE: the AT-VMN95E Stylus is not compatible with the AT95E Cartridge, only with AT-VM95E Cartridge which is an updated version of the cartridge.
Will this work with the BSR Quanta 400 turntable. Thank you for your time. Regards.
Answered by AudioTechnicaOnly if your BSR turntable has an AT-VM95 Series cartridge on it. Instead of purchasing the stylus (stylus ONLY), you may want to replace the cartridge complete with stylus. This will be the AT-VM95E Cartridge.
Customers often buy these together
$67.99The price was $71.49
More to consider
Your sound, your style Sponsored
Discover related products
$82.99The price was $103.95
$47.45The price was $48.99
$24.99The price was $48.00
