Audio-Technica - Audio Technica ATN3600LE Replacement Stylus - Black

Replace worn parts to get crystal clear sound with this Audio-Technica elliptical replacement stylus. The elliptical diamond design follows record grooves precisely to reduce distortion and improve response from the VM95 series. This Audio-Technica elliptical replacement stylus can be used to replace worn styluses and keep dual moving motor cartridges running flawlessly.

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. FeaturesVM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusWhat's in the BoxAT-VM95E Dual Moving Magnet CartridgeTwo 11mm installation screwsTwo 8mm installation screwsTwo washersSpecificationsFrequency response: 20 - 22000HzChannel separation: 20dB at 1kHzVertical tracking force: 1.8 - 2.2g (2.0g standard)Stylus construction: Bonded round shankRecommended load impedance: 47000 ohmsOutput: 4.0mV (1kHz 5cm/sec)Channel balance: 2.0dB (1kHz)Stylus shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement stylus: AT-VMN95ECoil impedance: 3.3k ohms (1kHz)DC resistance: 485 ohmsLoad capacitance: 100 to 200pFCoil inductance: 550mH (1kHz)Vertical tracking angle: 23°Dimensions (H x W x D): 0.68" x 0.74" x 1.2"Weight: 0.22 ounces

Keep vinyl LPs free from annoying static, microscopic dust, and harmful debris with AudioQuest’s Silver Anti-Static Record Brush. Simple, attractive, and remarkably effective, AudioQuest’s Silver Anti-Static Record Brush features 1,086,000 conductive carbon fibers and an uncoated metal finger grip to create a reliable electrical path between fibers and handle. Unlike most brushes that have a protective coating over their handles, AudioQuest’s Silver Anti-Static Record Brush employs an uncoated metal finger grip that has been carefully positioned for ease of use and efficacy, ensuring a proper electrical connection to the user’s hand. That electrical path from fibers to hand is key to the Silver Anti-Static Record Brush’s success: Upon gripping the handle and gently applying the brush’s bristles to the surface of an LP, the user essentially becomes the ground for static electricity. Like its sibling, AudioQuest’s Gold Anti-Static Record Brush, which boasts even more (1,248,000) conductive carbon fibers, the Silver Anti-Static Record Brush is a direct descendant of AudioQuest’s tried-and-TRUE Carbon Fiber Record Brush. Dating back to 1982, AudioQuest’s Carbon Fiber Record Brush is a TRUE hi-fi classic, trusted for decades by audiophiles, vinyl enthusiasts, collectors, record-shop owners, DJs, and anyone else who cares about LPs. In creating the improved design, AudioQuest established new tooling for every part of the Anti-Static Record Brush. The revamped Anti-Static Record Brush has ideal conductivity from its carbon fibers through its internal parts to the ergonomically positioned conductive contacts. AudioQuest also reinvestigated the performance potential of carbon fiber bristles, thoughtfully selecting a far greater quantity of smaller bristles to sweep away microscopic dust and debris — not just the less relevant visible dust — more effectively. Building and maintaining a record collection doesn’t have to be a daunting or tedious task. The AudioQuest Silver Anti-Static Record Brush makes it easy: Simply place a record on your turntable’s platter, start the turntable, and wait until the record is spinning at its proper speed (33, 45, or 78RPMs). Holding the Anti-Static Record Brush by its silver finger grips, place its fibers across the grooves — firmly enough that the bristles make constant contact with the record’s surface and gently enough that the bristles do not bend. Allow the record to turn for two or three rotations so that the Anti-Static Record Brush can collect the visible dust and any invisible microscopic dust. Gently and smoothly slide the brush away from the platter’s center spindle, toward your body, and off the record’s surface. Rotate the Anti-Static Record Brush within its handle to remove any dirt and debris from its carbon fiber bristles. Repeat the process as desired. Cleaning your records before and after each listening session helps keep them free from dust and debris while eliminating static that can contribute to annoying snaps, crackles, and pops. This safe and simple record-cleaning process also benefits your phono cartridge’s stylus, enhancing its performance and extending its lifespan by ensuring that it travels a smoother, cleaner path through the vinyl’s grooves. Make the AudioQuest Silver Anti-Static Record Brush an important part of your vinyl-care routine and join tens of thousands who have trusted AudioQuest with keeping their valuable collections clean, quiet, and static-free.