Skip to contentGo to Product Search
Main Content
Let's make sure this product fits your vehicle.

AudioControl - 2-Channel Active Line Output Converter and Line Driver - Black

Model: LC1i
SKU: 6482921
Sold byBest Buy

Customers are saying

Customers often highlight the excellent sound quality provided to sub amps by the 2-Channel Active Line Output Converter and Line Driver. The product is also praised for its ease of use and compact size, making it a convenient solution for various audio setups.

Generated by AI based on customer reviews.
See it in-store: Winchester (40.5 miles away) 
is the closest store with a demo model on display.

Features

  • Compatible with most vehicles’ OEM audio systems

    For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs or when replacing your vehicle’s factory radio and retaining the factory amplified audio system.

  • 2-channel interface

    Features one set of active speaker-level inputs, one set of line-level inputs, and one set of line-level outputs for integration with your existing audio system.

  • Built-in line driver

    Provides optimal preamp signal when an aftermarket head unit is installed.

  • Turn-on trigger mode switch

    Choose between GTO Signal Sense (DC offset) and audio sense to automatically power the line output converter or use remote 12V input for manual control.

  • Single variable stereo gain control with clipping indicator

    Allows you to adjust the output signal from -12dB to +12dB and indicates signal clipping when gain is set to high.

  • Selectable on-board load resistors

    Including 20 ohms, 60 ohms, and 20k ohms impedance for newer factory-amplified vehicles.

  • 400W (40V) peak power input per channel @ 20k ohms

    For high-quality sound.

  • 9.5V RMS (13V peak) maximum output voltage @ 14.4V

    For efficient operation.

  • Selectable ground isolation

    Choose from common, ISO (default), or 200 ohms.

  • 20Hz - 50kHz frequency response

    Ensures faithful sound reproduction.

  • >110dBA signal-to-noise ratio

    Enjoy crisp audio.

  • <0.01% Total Harmonic Distortion (THD)

    For clean sound.

  • Slim chassis with integrated mounting brackets

    Enables quick and easy installation.

  • 5-year warranty

    To protect against defects in materials and workmanship.

Specifications

  • Number of Channels
    2
    Surround Sound Supported
    Not Applicable
    Audio Only Inputs
    1 x Phono
    Audio/Video Inputs
    No audio/video inputs
    Network Connector(s)
    No network connectors
Sponsored

Reviews

Rating 4.8 out of 5 stars with 38 reviews

97% would recommend to a friend
Customers are sayingCustomers often highlight the excellent sound quality provided to sub amps by the 2-Channel Active Line Output Converter and Line Driver. The product is also praised for its ease of use and compact size, making it a convenient solution for various audio setups.
This summary was generated by AI based on customer reviews.
  • Sound Quality (12)
  • Ease of use (6)
  • Size (3)

Customer Images

The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.

  • Rated 5 out of 5 stars

    Did the job

    It does its job very well and has lasted me way longer than my previous loc. It's the perfect size to fit almost anywhere in any car, plus where the wires get inserted at can be takenout which is very nice and made the whole process alot faster. It's especially nice if you have a small car that has little to no room behind the headunit or under the glovebox cause itll fit near anywhere in the car. My only con about it is that i have to either make a mount or get some velcro to attach it somewhere, cause i dont want to drill holes into my car to mount it. But id say this is very much worth it.

    Posted by Thetoasterunderyourbed

  • Rated 5 out of 5 stars

    Great product

    Easy to follow instructions made the install a snap. It handles the high power of my stock system and the optimized/ clipping light made tuning a breeze

    Posted by Mystikyl

  • Rated 5 out of 5 stars

    Line driver

    Install line driver to provide higher sound quality to sub amp..no clip ...sub sounds amazing Audio control is best at what they do no one comes close !!

    Posted by Phonehero

  • Rated 4 out of 5 stars

    Adding subwoofer to stock unit

    This is essential to adding subwoofers to your stock unit in vehicle. It is universal meaning that it works with all stock radios in any vehicle with the least amount of money.

    Posted by Gettdown

  • Rated 5 out of 5 stars

    Turn offASC/ANC, no clipping, and it works so well

    I went from a Metra LOC and this thing makes one heck of a difference, I can play my subs louder for longer since this thing has a light on it to tell you if your signal is clipping, the instructions were super clear, and I loved not having to run a separate line for remote on, my old LOC used to play this bouncing bass note when I turned the car off and back on, and would pop when I turned it off, this has a feature that stops that from happening and it has been so nice. If you're experiencing a loud noise trying to play your subs, and you're using a factory touch screen radio, go into your settings (some have a special menu like my 17 Maxima did), and turn off ASC and ANC, noise cancelling can cause that and then ASC is a simulated sound of the engine for if you're going fast and a lot of cars have it.

    Posted by Tyler

Compare similar products

AudioControl - 2-Channel Active Line Output Converter and Line Driver - Black
AudioControl - 2-Channel Active Line Output Converter and Line Driver - Black
4.8(38)

Easily add an aftermarket amplifier to your vehicle’s factory audio system with this 2-Channel Active Line Output Converter and Line Driver by AudioControl. The LC1i converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This two-channel line output converter and line driver can also be used to retain your vehicle’s OEM amplified audio system when replacing your factory radio.

AudioControl - The Epicenter Concert Series Digital Bass Restoration Processor - Black
4.8(66)

Increase bass response from your vehicle’s audio system with The Epicenter Concert Series Digital Bass Restoration Processor by AudioControl. The Epicenter contains patented bass maximization circuity that analyzes the incoming audio signal from your source unit, recreates missing bass tones, and transmits this low-frequency information back into the signal path to increase bass response. This digital bass restoration processor also features parametric bass control and a subsonic filter for fine tuning.

Pyle - Pro Ultra Compact Phono Turntable Pre-Amplifier - Black

Refine the quality of your audio with this PylePro ultracompact preamp. Its extra-low-noise audio operation converts phono signals to line-level signals for improved clarity of sound. This PylePro ultracompact preamp is universally compatible to turntables and other studio equipment, and can accommodate magnetic pickups to tailor your sound production needs.

Fosi Audio - Box X5 Phono Preamplifier for MM and MC cartridges with 4-level gain adjustment and RIAA equalization accuracy - Black
5.0(3)

The Fosi Audio Box X5 is a compact high-fidelity phono preamp designed for vinyl enthusiasts. Compatible with both MM and MC cartridges, it features four selectable gain levels (38dB/48dB/56dB/66dB) and precise RIAA equalization for accurate, detailed sound reproduction. Built with premium audiophile-grade components, including low-noise circuitry and high-quality op-amps, the Box X5 delivers clean, dynamic audio with ultra-low distortion. Its durable aluminum alloy chassis and simple front-panel controls make it an ideal upgrade for turntables and home stereo systems.

Pros for AudioControl - 2-Channel Active Line Output Converter and Line Driver - Black
Sound Quality, Ease of use, SizeSound Quality, Ease of use, BassOverall Performance, Installation, Compatibility, ConnectivityAudio Quality

Specs

Questions & Answers

  • How is the AudioControl 2-Channel Converter powered on?

    You can choose between GTO Signal Sense (DC offset) and audio sense to automatically power the line output converter or use remote 12V input for manual control.

    This question and answer was generated by AI based on customer and product data.
  • What is the maximum output voltage of this device?

    The maximum output voltage is 9.5V RMS (13V peak) at 14.4V.

    This question and answer was generated by AI based on customer and product data.
  • Does this device have a built-in line driver?

    Yes, it has a built-in line driver to provide optimal preamp signal when an aftermarket head unit is installed.

    This question and answer was generated by AI based on customer and product data.
  • What is the frequency response of this audio converter?

    This audio converter has a frequency response of 20Hz - 50kHz.

    This question and answer was generated by AI based on customer and product data.
  • What is the signal-to-noise ratio of this audio converter?

    This device boasts a signal-to-noise ratio greater than 110dBA.

    This question and answer was generated by AI based on customer and product data.
Ask a question
No content

Customers often buy these together

Sponsored