Black Box Network Services - KVXLCDP-200 Video Extender Transmitter/Receiver

Need a OM3 optical fiber cable from a SC port to a SC port? This Cable Leader OM3 SC to SC fiber optic patch cable, also sold as a SC to SC multimode fiber optic cable, fiber optic network cable or patch cord, uses Corning 50/125 OM3 glass in a 2.0 mm OFNR riser-rated zipcord with a duplex SC/UPC connector with 31.8 mm boots at each end, insertion loss 0.30 dB or less and return loss 35 dB or better. OM3 fiber is specified by TIA-492AAAC at 2000 MHz-km effective modal bandwidth, which carries 10GBASE-SR up to 300 m and 25GBASE-SR up to 70 m under IEEE 802.3. Works with 10GBASE-SR and 1000BASE-SX multimode optics and equipment from TP-Link, TRENDnet, StarTech, Cisco, Ubiquiti, Netgear, Black Box, Transition Networks and Planet. Each cable is sample-tested during production, and Cable Leader handles replacement requests directly. Best for: 10G links between SC and SC gear, patch panels, media converters. Not for: LR or LX single-mode optics on yellow OS2 cable, green APC ports, or Toslink audio.

Need a OS2 optical fiber cable from a SC port to a SC port? This Cable Leader OS2 SC to SC fiber optic patch cable, also sold as a SC to SC single mode fiber optic cable, fiber optic network cable or patch cord, uses Corning 9/125 OS2 glass in a 2.0 mm LSZH/OFNR riser-rated zipcord with a duplex SC/UPC connector with 31.8 mm boots at each end, insertion loss 0.30 dB or less and return loss 55 dB or better. OS2 single mode optical fiber in the G657A1 bend-insensitive grade carries 1000BASE-LX and 10GBASE-LR links up to 10 km under IEEE 802.3 and works with existing G652D plant. Works with 10GBASE-LR and 1000BASE-LX single mode optics and equipment from TP-Link, TRENDnet, StarTech, Cisco, Ubiquiti, Netgear, Black Box, Transition Networks and Planet. Each cable is sample-tested during production, and Cable Leader handles replacement requests directly. Best for: 10G LR links between SC and SC gear, patch panels, media converters. Not for: SR or SX multimode optics on aqua OM3 or OM4 cable, green APC ports, or Toslink audio.

The JTECH-WEX4K-50 4K@60Hz wireless transmitter and receiver kit allows users to extend their 4K HDMI signal up to 196ft. (line of sight). Please note that the distance may vary if the signal is going through obstacles. This kit supports 1 transmitter paired to 1 receiver, and users can utilize multiple sets within the environment due to the SSID pairing capabilities of the extender kit. Also featured is operating channel changing capability that help reduce interference from other wireless devices within the vicinity. Take advantage of the local HDMI loop output port to connect an additional display to the transmitter via HDMI locally, and the IR feature can be used to control the source device from the display’s location using the source devices’ remote control. Offering ease of setup, the JTECH-WEX4K-50 4K wireless transmitter and receiver HDMI extender kit can be easily installed within any setup without any frustration.