Cable Leader - Low Profile Flat Plug 2-Prong Power Cord, Non-Polarized NEMA 1-15P to C7, 18 AWG 7A for TV, Game Console, Printer - Black

Lost or damaged the figure-8 cord that came with your console, TV, or printer? This non-polarized IEC 60320 C7 AC power cord is the standard replacement, with a NEMA 1-15P wall plug on one end and a C7 figure-8 socket on the other, so the plug seats either way around. The conductor is 18 AWG stranded copper rated 7A at 125V with 105 degree C insulation, the cordset is UL Listed, and both ends are fully molded so the strain point does not work loose. Compatible with PS5, PS5 Slim, PS4, PS4 Slim, Xbox Series X, Xbox Series S, Xbox One S, Samsung and LG TVs, TCL and Apple TV players, Canon, HP and Epson printers, monitors, and soundbars using a 2-slot figure-8 inlet. Best for: replacement of a lost, damaged, or too-short factory cord on a game console, TV, PC, computer monitor, printer, or small AV gear. Not for: polarized C7 inlets with one squared edge, grounded 3-prong equipment, or loads over 7A.

This is the polarized version of the figure-8 AC cord: one side of the C7 connector is squared off, so it only seats one way and only fits equipment built for a polarized inlet. It is the replacement cord for Vizio D, E and M Series LED TVs and Vizio Sound Stand and soundbars, Sony PlayStation PS1 and PS2, Bose Companion 3 and 5, SoundTouch 20 and 30 and Acoustimass systems, Brother, Singer, Baby-Lock, Viking and Pfaff sewing machines, and Sharp, Sanyo and Philips sets that use a 2-slot polarized socket. The conductor is 18 AWG stranded copper rated 10A at 125V, a higher rating than the 7A cords usually sold for this job, and the cordset is UL Listed with fully molded ends. Look at your device before ordering: one side of the socket flat or squared, the other rounded means polarized and this is the right cord. Best for: replacing a lost or damaged factory cord on a polarized TV, console, soundbar, or sewing machine. Not for: sockets with two identical rounded sides, three-prong equipment, or loads over 10A.

Power your IEC C13-equipped equipment from a European wall outlet with this right-angle Schuko (CEE 7/7) to IEC 60320 C13 power cord. The 90-degree Schuko plug seats flush against the wall so the cord routes cleanly behind desks, racks and power strips where a straight plug would stick out. It is built on flexible 18 AWG H05VV-F 3G (0.75 mm-squared) cable with a black PVC jacket and fully molded, grounded connectors, rated 10A at 250V for reliable mains power. The C13 end mates with the standard 3-pin C14 inlet found on computers, monitors, printers, PDUs and UPS systems, while the Schuko plug fits grounded Type E/F outlets used across most of continental Europe. Best for: powering PCs, displays and data-center gear from European Schuko outlets, or replacing a lost or damaged EU power cord. Not for: US or Canada NEMA wall outlets, which use flat blades and will not accept this round-pin European plug.