Cable Leader - Low Profile Flat Plug 2-Prong Power Cord, Non-Polarized NEMA 1-15P to C7, 18 AWG 7A for TV, Game Console, Printer - Black

Lost or damaged the power cord for your desktop PC, monitor, or printer? This Cable Leader computer power cord is a direct replacement for the standard 3-prong cord, with a NEMA 5-15P plug on the wall end and an IEC 60320 C13 connector on the device end, rated 10A at 125V for up to 1250W, and it adds a foil shield around the conductors that an ordinary computer power cord leaves out. Built from 18 AWG stranded copper with an SVT PVC jacket, fully molded ends, and UL Listed construction. Compatible with Dell, HP, Lenovo, ASUS, Acer, Samsung, LG, and MSI desktops and monitors, plus printers, scanners, network switches, and AV receivers that use a C13 inlet - it does not fit C7 figure-8, C5 clover, or C19 inlets. Best for: replacing a standard 3-prong C13 computer power cord or monitor power cable. Not for: 2-prong devices, C5, C7, or C19 inlets, or outdoor use. RoHS compliant.

Lost or damaged the figure-8 cord that came with your console, TV, or printer? This non-polarized IEC 60320 C7 AC power cord is the standard replacement, with a NEMA 1-15P wall plug on one end and a C7 figure-8 socket on the other, so the plug seats either way around. The conductor is 18 AWG stranded copper rated 7A at 125V with 105 degree C insulation, the cordset is UL Listed, and both ends are fully molded so the strain point does not work loose. Compatible with PS5, PS5 Slim, PS4, PS4 Slim, Xbox Series X, Xbox Series S, Xbox One S, Samsung and LG TVs, TCL and Apple TV players, Canon, HP and Epson printers, monitors, and soundbars using a 2-slot figure-8 inlet. Best for: replacement of a lost, damaged, or too-short factory cord on a game console, TV, PC, computer monitor, printer, or small AV gear. Not for: polarized C7 inlets with one squared edge, grounded 3-prong equipment, or loads over 7A.

This is the polarized version of the figure-8 AC cord: one side of the C7 connector is squared off, so it only seats one way and only fits equipment built for a polarized inlet. It is the replacement cord for Vizio D, E and M Series LED TVs and Vizio Sound Stand and soundbars, Sony PlayStation PS1 and PS2, Bose Companion 3 and 5, SoundTouch 20 and 30 and Acoustimass systems, Brother, Singer, Baby-Lock, Viking and Pfaff sewing machines, and Sharp, Sanyo and Philips sets that use a 2-slot polarized socket. The conductor is 18 AWG stranded copper rated 10A at 125V, a higher rating than the 7A cords usually sold for this job, and the cordset is UL Listed with fully molded ends. Look at your device before ordering: one side of the socket flat or squared, the other rounded means polarized and this is the right cord. Best for: replacing a lost or damaged factory cord on a polarized TV, console, soundbar, or sewing machine. Not for: sockets with two identical rounded sides, three-prong equipment, or loads over 10A.