Cable Leader - NEMA 6-20P to IEC C13 Power Cord, Heavy Duty 14 AWG 15A 250V for 208V/240V Server, UPS, PDU, Workstation - Black
Reviews coming soon
About this product
Need to power a server, UPS, or high-wattage workstation from a 208V or 240V circuit with a 20 amp NEMA 6-20R outlet, but the equipment only shipped with a standard 120V cord? This Cable Leader NEMA 6-20P to IEC C13 power cord connects any device with a C14 inlet directly to a 6-20R receptacle. The plug matches the 20A outlet, while the C13 end sets the cord rating at 15A 250V, so the device must draw 15 amps or less. Built with 14 AWG three-conductor copper wire, a 105C SJT jacket, and fully molded plugs with strain relief at both ends. Compatible with any device using an IEC C14 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C14 input, network switches, and 240V workstations; it does not fit 120V wall outlets, NEMA 6-15R outlets, C20 inlets, or twist-lock L6 receptacles. UL Listed, RoHS and REACH compliant. Best for: 208V/240V rack and workstation power from a NEMA 6-20R outlet. Not for: 120V household outlets, 6-15R outlets, C19/C20 equipment, or loads above 15A.
Cable Length
10'Features
Power 208V/240V Equipment from a NEMA 6-20R Outlet
Replace the 120V cord that came in the box with one made for the 240V circuit your equipment actually runs on. Plugs into a NEMA 6-20R receptacle at one end and any IEC C14 inlet at the other: rack servers on a 208V branch circuit, a UPS or PDU fed from a 20 amp, 240 volt drop, or a high-wattage workstation on a dedicated 240V outlet. Rated 15A 250V.
15A 250V, 14 AWG Copper - Rated for Full-Load Rack Duty
The NEMA 6-20P plug (NEMA 6-20 series) is the standard 250V configuration for 20 amp branch circuits; the IEC C13 end meets the IEC 60320 spec for C14 inlets and sets the cord rating at 15A. Three 14 AWG copper conductors are sized for that full 15A load with margin to spare, so the cord stays cool under sustained draw. 105C SJT jacket, UL Listed, RoHS and REACH compliant.
Fits NEMA 6-20R Outlets and C14 Inlets - Not for 120V
Works with any device that has an IEC C14 power inlet, accepts 208V to 240V input, and draws 15A or less: servers, UPS units, rack PDUs, network switches, storage arrays, 240V workstations. Quick check: Outlet is NEMA 6-20R (one T-shaped slot) - Yes; Device inlet is C14 - Yes; Outlet is NEMA 6-15R (no T-shaped slot) - No; 120V wall outlet - No; C20 inlet or over 15A - No. For 6-15R outlets, use a NEMA 6-15P to C13 cord.
Heavy-Duty 14 Gauge SJT - Built for Racks and Workstations
Three 14 gauge (14 AWG) copper conductors inside a 105C-rated SJT jacket that stays flexible enough to route through rack rails and cable managers without kinking. Both the 3 prong 6-20P plug and the C13 connector are fully molded with integrated strain relief, so the cord survives repeated seating in a C14 inlet and being pulled through under-desk runs. Black jacket blends into rack wiring.
Sample-Tested Production - Cable Leader Direct Support
Each cord is sample-tested during production for electrical continuity. Manufactured to RoHS environmental standards (lead, mercury, and cadmium-free). If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly - no manufacturer redirects.
Specifications
- Cable Length10 feetConnector Type (End 1)NEMA 6-20Gender (End 1)MaleConnector Type (End 2)IEC/EN 60320 (IEC 320)Gender (End 2)FemaleIn-Wall RatedNo
Reviews
This product doesn't have any reviews yet.
Compare similar products

Need to power a server, UPS, or high-wattage workstation from a 208V or 240V circuit with a 20 amp NEMA 6-20R outlet, but the equipment only shipped with a standard 120V cord? This Cable Leader NEMA 6-20P to IEC C13 power cord connects any device with a C14 inlet directly to a 6-20R receptacle. The plug matches the 20A outlet, while the C13 end sets the cord rating at 15A 250V, so the device must draw 15 amps or less. Built with 14 AWG three-conductor copper wire, a 105C SJT jacket, and fully molded plugs with strain relief at both ends. Compatible with any device using an IEC C14 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C14 input, network switches, and 240V workstations; it does not fit 120V wall outlets, NEMA 6-15R outlets, C20 inlets, or twist-lock L6 receptacles. UL Listed, RoHS and REACH compliant. Best for: 208V/240V rack and workstation power from a NEMA 6-20R outlet. Not for: 120V household outlets, 6-15R outlets, C19/C20 equipment, or loads above 15A.

Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.

Need to power a UPS, rack PDU, or server with a C20 inlet from a standard wall outlet? This Cable Leader power cord pairs a NEMA 5-15P 3-prong grounded wall plug with an IEC 60320 C19 connector, delivering wall-outlet power directly to higher-power equipment without a PDU-to-device jumper. It is built from 14 AWG, 3-conductor copper wire with a flame-retardant VW-1 SJT jacket and fully molded ends, rated 15A at 125V for indoor use, and the cordset is UL Listed. The C19 connector fits the C20 inlets commonly found on rack PDUs, larger UPS units, servers, and core switches; it is larger than the common C13 and will not fit C14 inlets, and the 5-15P plug limits the cordset to 15A even though some C19 hardware exists in 20A versions. Best for: powering a C20-inlet UPS, PDU, or server from a standard North American wall outlet within 15A/125V. Not for: C13/C14 devices, 20A applications, 250V circuits, or outdoor use.

Need to run a server, UPS, or rack PDU with an IEC C20 inlet from a 208V or 240V circuit with a NEMA 6-20 outlet? This Cable Leader NEMA 6-20P to IEC C19 power cord plugs into a 20 amp 6-20R receptacle and carries the full 20A 250V rating end to end, because the 6-20P plug, the 12 AWG conductors, and the C19 connector are all rated for 20 amps. Built with 12 gauge three-conductor cable in a black SJT jacket, with fully molded plugs and strain relief at both ends. Compatible with any device using an IEC C20 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C20 input, high-power network switches, and ASIC miners; for loads that run around the clock, keep continuous draw at 16A or less. UL Listed and RoHS compliant. Best for: 208V/240V data center, server rack, and equipment power from a NEMA 6-20R outlet. Not for: 120V household outlets, NEMA 6-15R outlets, twist-lock L6-20 receptacles, or devices with a C14 inlet.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.






































