Cable Leader - Power Extension Cord, IEC C13 to C14 Heavy-Duty, 16 AWG 13A 250V for PDU, UPS, Server Rack, Monitor - Black
Reviews coming soon
About this product
This power cord extension adds reach to a power cable you already own, or connects equipment straight to a rack outlet. The fully molded IEC 60320 C14 male plug mates with any C13 outlet on a PDU, UPS, surge protector, or the C13 end of an existing wall cord, while the C13 female end fits any device with a standard C14 power inlet - desktop computers, servers, network switches, monitors, printers and scanners. As an IEC C13 power cord built on heavy-duty 16 AWG three-conductor copper with a flexible SJT jacket rated to 105C (221F), this 3-prong extension power cord carries 13A at 250V, a full amp step above the 10A 18 AWG cords normally supplied in the box. Fully molded strain relief at both ends resists cracking where the cable meets the connector. UL Listed. Best for: extending a C14-inlet device to a PDU or UPS in a rack, data center or workstation, and replacing a lost or worn power cord extender. Not for: wall outlets - this cord has no NEMA plug; and not for C5, C15 or C19 inlets, or equipment drawing more than 13A.
Cord Length
1.5'Extend Any C14-Inlet Device to a PDU, UPS or Rack Outlet
Racks and workstations rarely place the outlet where the equipment ends up. This power extension cable adds the reach you need without swapping the cord that came with the device: plug the C14 end into any spare C13 outlet on a PDU, UPS or surge protector, or into the C13 end of the cord you already run to the wall, then plug the C13 end onto the device inlet. It also works as a replacement when the original cord is lost or worn.
13A 250V on 16 AWG - a Full Amp Step Over 18 AWG Cords
Three 16 AWG stranded copper conductors carry 13 amps at up to 250 volts, compared with the 10A rating of the 18 AWG extension power cord usually bundled with equipment. The heavier gauge means less voltage drop over long runs and more headroom for power supplies that pull hard at startup. The SJT jacket is rated to 105C / 221F and stays flexible in warm, densely packed enclosures. UL Listed.
Which End Goes Where - Not for Wall Outlets
Both ends are 3-prong IEC 60320. The C14 end has three flat pins in a trapezoid; the C13 end is the matching socket. Quick check: device back panel has a three-pin trapezoid inlet - Yes. Spare outlet on a PDU or UPS - Yes. Standard wall outlet - No, you need a NEMA 5-15P to C13 cord instead. Square C20 inlet or notched C15 or C19 socket - No. Two-pin figure-8 or cloverleaf inlet - No. Equipment drawing more than 13A - No.
Fully Molded Ends and SJT Jacket - Built for Rack Runs
Both connectors are fully molded to the jacket with integrated strain relief, so the cable flexes at the point that normally cracks first on cut-price cords. The black SJT jacket is abrasion and moisture resistant, ties down cleanly in horizontal cable managers, and keeps its shape through repeated re-patching. Indoor rated for racks, data centers, offices and workstations.
Sample-Tested Production - Cable Leader Direct Support
Each production run is sample-tested for continuity, polarity and current rating before it ships. If your cord arrives defective or stops working in normal use, Cable Leader handles the replacement request directly - no manufacturer redirects and no proof-of-purchase scavenger hunt.
- BrandCable LeaderModel NumberPW119-121HProduct NamePower Extension Cord, IEC C13 to C14 Heavy-Duty, 16 AWG 13A 250V for PDU, UPS, Server Rack, MonitorColorBlackJacket MaterialSJT (PVC)Amperage13 amperes
Reviews
This product doesn't have any reviews yet.
Compare similar products
This power cord extension adds reach to a power cable you already own, or connects equipment straight to a rack outlet. The fully molded IEC 60320 C14 male plug mates with any C13 outlet on a PDU, UPS, surge protector, or the C13 end of an existing wall cord, while the C13 female end fits any device with a standard C14 power inlet - desktop computers, servers, network switches, monitors, printers and scanners. As an IEC C13 power cord built on heavy-duty 16 AWG three-conductor copper with a flexible SJT jacket rated to 105C (221F), this 3-prong extension power cord carries 13A at 250V, a full amp step above the 10A 18 AWG cords normally supplied in the box. Fully molded strain relief at both ends resists cracking where the cable meets the connector. UL Listed. Best for: extending a C14-inlet device to a PDU or UPS in a rack, data center or workstation, and replacing a lost or worn power cord extender. Not for: wall outlets - this cord has no NEMA plug; and not for C5, C15 or C19 inlets, or equipment drawing more than 13A.
Gear up for the holiday season with this Best Buy Essentials 25' 16 AWG Indoor/Outdoor Extension Power Cord. The extension cord is rated for indoor or outdoor use and can handle a broad range of temperatures and weather elements. Gain an additional 25 ft. (7.6m) of length to an existing cord to connect to out-of-reach outlets. And it’s backed by Best Buy, so you can trust that it will get the job done.
Powering a high-draw device — a server rack, space heater, window AC, or large appliance — and need more reach without risking a thin, overheating cord? This Cable Leader 14 AWG heavy-duty power extension cord delivers grounded NEMA 5-15 reach rated for the full 15A/125V (1875W). Built with thick 14 AWG conductors, a flexible SJT jacket, and fully molded 3-prong plugs for safe, reliable power under heavy load. Compatible with any device using a standard NEMA 5-15P plug — servers, PDUs, monitors, printers, UPS battery backups, AC units, and appliances — but it is not a surge protector or voltage converter. Rated 15A/125V (1875W max) for indoor use. Best for: heavy-gauge power extension to high-draw 120V equipment. Not for: outdoor wet locations, 240V appliances, or loads above 15A/1875W. UL and cUL listed, CSA approved, and RoHS compliant.
Need weather-resistant power out to the yard, driveway, garage, or job site? This Cable Leader 14 AWG outdoor extension cord uses a tough SJTW jacket that stands up to sun, moisture, cold, and abrasion, with grounded NEMA 5-15 connectors for running power tools, mowers, leaf blowers, holiday lights, and shop equipment. Built with 14 AWG conductors and fully molded 3-prong plugs rated 15A/125V (1875W) for indoor and outdoor use. Compatible with any device using a standard NEMA 5-15P plug. Best for: outdoor and garage power for tools, lawn equipment, and seasonal lighting. Not for: permanent in-wall wiring, 240V equipment, or loads above 15A. UL and cUL listed and RoHS compliant.
| Pros for Cable Leader - Power Extension Cord, IEC C13 to C14 Heavy-Duty, 16 AWG 13A 250V for PDU, UPS, Server Rack, Monitor - Black | |||
|---|---|---|---|
| There were no pros for this product— | Overall Performance, Cord Length, Versatility, Outdoor Use, Price | There were no pros for this product— | There were no pros for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Find more like this
$24.29The price was $26.99
$8.57The price was $12.00
More to consider
Explore tech essentials Sponsored
Keep exploring
$23.39The price was $25.99- $8.57The price was $12.00
- $24.29The price was $26.99
